**** BEGIN LOGGING AT Mon Sep 01 02:59:58 2014 Sep 01 03:10:01 build #578 of iop32x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/578 Sep 01 04:12:29 build #73 of brcm47xx.mips74k is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.mips74k/builds/73 Sep 01 04:12:38 build #625 of kirkwood is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/625 Sep 01 05:55:40 build #260 of mvebu is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/260 Sep 01 08:21:33 build #526 of octeon is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/526 Sep 01 10:45:38 what packages will land in the final BB release? HEAD of the github repo? Sep 01 10:45:59 actually, I'm interested in https://github.com/openwrt-routing/packages Sep 01 10:57:45 zorun: package repositories have a branch for-14.07 Sep 01 11:30:59 cyrusff: ah, right, I had missed that Sep 01 11:31:00 thanks Sep 01 11:40:57 blogic r42348 trunk/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch * mac80211: rt2x00 correctly set ht20/ht40 filter Sep 01 13:19:51 blogic r42349 trunk/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch * mac80211: rt2x00: fix of ht20/ht40 switching fix Sep 01 13:21:21 blogic r42350 branches/barrier_breaker/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh * broadcom-wl: add default tx and rx antennas Sep 01 13:21:23 blogic r42351 branches/barrier_breaker/package/network/services/hostapd/files/netifd.sh * hostapd: fix some whitespaces Sep 01 13:21:24 blogic r42352 branches/barrier_breaker/package/base-files/image-config.in * build: enable PER_FEED_REPO by default Sep 01 13:21:26 blogic r42353 branches/barrier_breaker/package/network/config/firewall/Makefile * firewall: implement selective conntrack flushing (#10225) Sep 01 13:21:28 blogic r42354 branches/barrier_breaker/package/network/config/firewall/Makefile * firewall: fix potential NULL pointer access Sep 01 13:21:30 blogic r42355 branches/barrier_breaker/package/network/services/ ppp/Makefile ppp/files/ppp.sh * ppp: enable IPv6CP by default Sep 01 13:21:32 blogic r42356 branches/barrier_breaker/target/linux/ar71xx/image/Makefile Sep 01 13:21:34 ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 since they have the same flash layout Sep 01 13:21:37 blogic r42357 branches/barrier_breaker/target/linux/ramips/dts/MPRA1.dts * ramips: enable additional GPIOs on HAME MPR-A1 Sep 01 13:21:40 blogic r42358 branches/barrier_breaker/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips * ramips: add a workaround to fix failsafe on RT5350 Sep 01 13:21:43 blogic r42359 branches/ barrier_breaker/target/linux/lantiq/base-files/etc/uci-defaults/02_network barrier_breaker/target/linux/lantiq/dts/ARV7519RW.dtsi * lantiq: improve ARV7519RW22 support Sep 01 13:21:48 blogic r42360 branches/barrier_breaker/target/linux/lantiq/patches-3.10/0209-lantiq-export-soc-type.patch * lantiq: export soc type Sep 01 13:21:51 blogic r42361 branches/barrier_breaker/target/linux/lantiq/patches-3.10/0210-lantiq-xrx200-firmware-multi-version.patch * lantiq: add support for xrx200 firmware depending on soc type Sep 01 13:21:54 blogic r42362 branches/ (6 files in 3 dirs) * lantiq: generate unique ARV7519RW22 firmware Sep 01 13:21:58 blogic r42363 branches/barrier_breaker/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c * ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board Sep 01 13:22:01 blogic r42364 branches/barrier_breaker/target/linux/ar71xx/image/Makefile * ar71xx: build factory image for EnGenius ESR900 and ESR1750 Sep 01 13:22:04 blogic r42365 branches/barrier_breaker/target/linux/ramips/image/Makefile * ramips: add mpr-a1 to default profile Sep 01 13:22:08 blogic r42366 branches/barrier_breaker/target/linux/ramips/rt305x/profiles/hame.mk * ralink: clean up HAME profiles, remove unnecessary packages. Sep 01 13:22:12 blogic r42367 branches/barrier_breaker/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c * ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC Sep 01 13:22:15 blogic r42368 branches/barrier_breaker/package/utils/busybox/Makefile * busybox: Fix pam_start link errors when PAM support is enabled Sep 01 13:22:18 blogic r42369 branches/barrier_breaker/package/libs/gmp/Makefile * gmp: add host compile Sep 01 13:22:22 blogic r42370 branches/ (5 files in 5 dirs) * ramips: Add support for Omnima MiniPlug Sep 01 13:22:25 blogic r42371 branches/barrier_breaker/target/linux/brcm47xx/image/Makefile * brcm47xx: image: build alternative TRX using less optimized LZMA Sep 01 13:22:28 blogic r42372 branches/barrier_breaker/package/devel/valgrind/Makefile * valgrind: fix build failure on uml Sep 01 13:22:31 blogic r42373 branches/barrier_breaker/package/libs/libubox/Makefile * libubox: update to latest git revision Sep 01 13:22:34 blogic r42374 branches/barrier_breaker/package/network/config/firewall/files/firewall.init * firewall: the firewall did not start properly on boot Sep 01 13:22:38 blogic r42375 branches/ barrier_breaker/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch barrier_breaker/target/linux/ramips/dts/rt5350.dtsi barrier_breaker/target/linux/ramips/patches-3.14 barrier_breaker/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch * ramips: second spi device on rt5350 Sep 01 13:22:43 blogic r42376 branches/ (8 files in 7 dirs) * ramips: Add support for VoCore Sep 01 13:22:46 blogic r42377 branches/ barrier_breaker/target/linux/ramips/dts/rt5350.dtsi barrier_breaker/target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch * ramips: Add support for SPI_CS1 pinmux Sep 01 13:22:50 blogic r42378 branches/ barrier_breaker/target/linux/ramips/dts/VOCORE.dts barrier_breaker/target/linux/ramips/rt305x/profiles/vocore.mk * ramips: enable second SPI for VoCore Sep 01 13:22:54 blogic r42379 branches/barrier_breaker/package/ (7 files in 7 dirs) * package/*: remove useless explicit set of function returncode Sep 01 13:22:57 blogic r42380 branches/barrier_breaker/target/linux/ar71xx/base-files/lib/upgrade/platform.sh * ar71xx: enable sysupgrade for the EnGenius ESR900 Sep 01 13:23:00 blogic r42381 branches/barrier_breaker/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c * ar71xx: use ETH_ALEN for consistency Sep 01 13:23:03 blogic r42382 branches/barrier_breaker/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch * mac80211/rt2x00: allow disabling bands through dts Sep 01 13:23:08 blogic r42383 branches/ barrier_breaker/target/linux/ramips/mt7620n/profiles/00-default.mk barrier_breaker/target/linux/ramips/mt7620a/profiles/00-default.mk * ralink: mt7620 has obchi/ehci and not dwc2 Sep 01 13:23:11 blogic r42384 branches/barrier_breaker/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch * ralink: fix mt7620 ohci 3.10 Sep 01 13:23:15 blogic r42385 branches/barrier_breaker/target/linux/ramips/dts/MT7620a.dts * ralink: the mt7620 evb has a usb port Sep 01 13:23:18 blogic r42386 branches/barrier_breaker/target/linux/lantiq/dts/BTHOMEHUBV2B.dts * lantiq: BTHOMEHUBV2B use bigger mtd partition for kernel Sep 01 13:23:22 blogic r42387 branches/ barrier_breaker/target/linux/ar71xx/base-files/etc/uci-defaults/02_network barrier_breaker/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds barrier_breaker/target/linux/ar71xx/patches-3.10/725-MIPS-ath79-add_mikrotik_rb2011uias-2hnd.patch barrier_breaker/target/linux/ar71xx/base-files/lib/ar71xx.sh * ar71xx: add Support f Sep 01 13:23:27 OpenWrtor RB2011UiAS-2HnD Sep 01 13:23:29 blogic r42388 branches/barrier_breaker/package/network/services/dnsmasq/files/dnsmasq.init * dnsmasq: Create rDNS records for LuCI "Hostnames" Sep 01 13:23:32 blogic r42389 branches/barrier_breaker/package/network/services/dnsmasq/files/dnsmasq.init * dnsmasq: Fix hosts file format when MAC address is not specified Sep 01 13:23:36 blogic r42390 branches/barrier_breaker/package/network/services/dnsmasq/files/dnsmasq.init * dnsmasq: Make the --dhcp-host logic easier to understand Sep 01 13:23:40 blogic r42391 branches/barrier_breaker/target/linux/ramips/dts/DIR-645.dts * ralink: DIR-645 picks up incorrect MAC address in DTS file Sep 01 13:23:44 blogic r42392 branches/barrier_breaker/README * Add 'subversion' build dependency to README Sep 01 13:23:47 blogic r42393 branches/ (11 files in 10 dirs) * add support for the NC-LINK SMART-300 Sep 01 13:23:50 blogic r42394 branches/ barrier_breaker/target/linux/ramips/base-files/etc/uci-defaults/01_leds barrier_breaker/target/linux/ramips/base-files/etc/diag.sh barrier_breaker/target/linux/ramips/dts/MPRA2.dts barrier_breaker/target/linux/ramips/dts/MPRA1.dts * ramips: Hame: change LED name mpr-x -> hame Sep 01 13:23:54 blogic r42395 branches/barrier_breaker/target/linux/ramips/base-files/etc/uci-defaults/02_network * ramips: fix switch config for Edimax 3G-6200n Sep 01 13:23:58 blogic r42396 branches/barrier_breaker/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch * mac80211: rt2x00 correctly set ht20/ht40 filter Sep 01 13:26:19 Sorry guys. I know this isn't a user support channel, but - I wanted to know if there is any thing I might do / expect to help resolving the problem with rt305x based routers Wi-Fi dying Sep 01 13:26:44 the ticket is this: https://dev.openwrt.org/ticket/12313 Sep 01 13:27:18 oh - not dying, but I need to reboot the router to get it working, even if I didn't try to rmmod / modprobe the drivers again Sep 01 13:27:43 I set my state to away to be able to catch your messages after, but I am there Sep 01 13:27:53 if you would like to be sure I can read, a PM would be good in case I am not responsive Sep 01 14:33:13 Might in your opinion revision 42348 and 42349 influence / fix my problem? Sep 01 14:43:48 question about kernel patches - when it will be necessary to port all the stuff done for 3.10.x to 3.14.x? Sep 01 14:44:52 is there some kind of roadmap? when will chaos calmar use 3.14.x by default? Sep 01 15:23:14 n3ph1: all stuff done in trunk/CC on generic 3.10.x is supposed to be done also on generic 3.14.x (or generally all kernel versions); individual targets are updated at descreeting of the maintainer(s). There is no fixed deadline/roadmap currently for trunk/CC. Sep 01 15:23:23 *descretion Sep 01 15:24:15 KanjiMonster: thx.. Sep 01 15:24:42 someone knows where l7-protocols gone? can't find them in BB default feeds... Sep 01 15:26:40 using the github repo from janaz atm.. Sep 01 15:28:49 hmmm -g uessing its obsolete to use that since freifunk-p2pblock exists? Sep 01 15:56:58 n3ph1: l7-protocols where are horrible memleak, that's why they got removed Sep 01 15:57:01 were* Sep 01 15:58:43 freifunk-p2pblock still defected by l7-protcols problem described here: https://dev.openwrt.org/ticket/14076 Sep 01 15:58:45 ough Sep 01 16:02:46 n3ph1: https://dev.openwrt.org/ticket/8590 Sep 01 16:02:47 how to p2pblock then Sep 01 16:05:42 stinte:รท thx - this was very revealing... Sep 01 16:06:04 but so - if i want to p2pblock then i am lost atm i guess? Sep 01 16:06:23 probably Sep 01 16:06:50 so freifunk-p2pblock is also defected entirely - it should be removed... Sep 01 16:07:45 if you use luci-app-p2pblock and configure it fro webif you will never be informed that the initscript is throwing errors like "Couldn't load match 'layer7'..... Sep 01 16:08:22 this is IMHO a very bad behavior Sep 01 16:11:52 agreed Sep 01 16:12:22 not sure if p2pblock needs l7* for all its rules Sep 01 16:12:50 Simple Addon for Freifunk which use iptables layer7-, ipp2p- and recent-modules Sep 01 16:12:53 to block p2p/filesharing traffic Sep 01 16:13:04 maybe there are still some rules that work without it, but no idea Sep 01 16:15:20 i just had a quick view on it - could be - but the whole idea is to block p2p traffic - so this could cause some big trouble to people which are not aware of this defect... Sep 01 17:50:03 build #674 of ppc44x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/674 Sep 01 18:53:07 build #280 of imx6 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/imx6/builds/280 Sep 01 19:06:11 n3ph1: hm, there is no easy fix. i hoped its as easy as just adding a depency in p2pblock, but l7 filters used to be in iptables-mod-filter which probably is built but without the l7 module Sep 01 20:16:31 sorry guys if I am losing some messages / not answering to some messages Sep 01 20:16:38 thank you for anything Sep 01 20:17:04 hoping the latest build fixes the probllem. Sep 01 20:17:14 I will not come back if it will. Sep 01 20:17:23 at least- I'll not come back talking about it :) Sep 01 20:17:58 and sorry for the phrasing / attitude. I am a little bit confused might be, might be tired Sep 01 22:34:57 nbd r42397 trunk/target/sdk/Makefile * sdk: keep $(STAGING_DIR)/usr/bin, at least curl needs it Sep 01 22:35:09 nbd r42398 branches/barrier_breaker/target/sdk/Makefile * sdk: keep $(STAGING_DIR)/usr/bin, at least curl needs it Sep 02 00:37:47 build #643 of sibyte is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/643 Sep 02 01:20:51 build #655 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/655 Sep 02 02:23:44 build #720 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/720 **** ENDING LOGGING AT Tue Sep 02 02:59:59 2014