**** BEGIN LOGGING AT Sat Nov 22 03:00:00 2014 Nov 22 03:43:06 build #128 of lantiq.xrx200 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq.xrx200/builds/128 Nov 22 03:43:23 build #699 of kirkwood is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/699 Nov 22 04:29:43 Hi. is there a way to give modules from 3.18 higher priority than those in wireless-compat? How will openwrt cope with the transition to a new kernel? Nov 22 05:12:53 build #137 of brcm63xx.smp is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx.smp/builds/137 Nov 22 05:59:39 build #135 of ar71xx.nand is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.nand/builds/135 Nov 22 06:59:14 build #698 of ar71xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/698 Nov 22 07:14:34 build #812 of at91 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/812 Nov 22 07:16:08 build #140 of brcm47xx.mips74k is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.mips74k/builds/140 Nov 22 08:46:51 build #672 of au1000 is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/672 Nov 22 10:00:43 build #233 of mpc83xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/233 Nov 22 10:25:42 build #233 of brcm2708 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm2708/builds/233 Nov 22 10:54:31 build #836 of brcm63xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/836 Nov 22 11:06:10 build #256 of x86_64 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/x86_64/builds/256 Nov 22 11:37:02 build #164 of brcm47xx.legacy is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.legacy/builds/164 Nov 22 11:40:44 build #233 of cns3xxx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/cns3xxx/builds/233 Nov 22 11:41:55 build #641 of ep93xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/641 Nov 22 12:27:23 jogo r43341 trunk/target/ (62 files) * brcm63xx: move board compatible strings into a table Nov 22 12:59:10 build #127 of ar71xx.mikrotik is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/127 Nov 22 16:05:33 build #813 of brcm47xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/813 Nov 22 16:09:17 build #754 of ppc44x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/754 Nov 22 16:42:59 is there an easy way to co-erce squash+overlay to use an ext4 partition for the overlay, similar to how squash+jffs works ? Nov 22 16:43:27 i've been reading and reading in forums and google searches, cant seem to find a way to get this to work Nov 22 16:48:22 what I'm trying to accomplish, is essentially the same as using squash+jffs, but do so using squash+ext4 Nov 22 16:48:46 because it takes _sooooo_ long for the intial erase using jffs on a usb stick mapped thru mtdblock Nov 22 17:02:12 you want the usb stick to be the overlay? not just secondary storage? Nov 22 17:02:56 i have 3 partitions, first is fat with kernel in it, uboot loads that Nov 22 17:03:10 second is a squash root, so I have readonly yadda yadda Nov 22 17:03:18 then i have a third defined, it's ext4 Nov 22 17:03:26 and i'm trying to get that to be used as overlay Nov 22 17:03:52 so it behaves pretty much the same as a typical split rootfs that becomes two mtd partions Nov 22 17:04:01 in a device with smaller flash Nov 22 17:04:28 i have it working by using mtdblock to define it all as mtd Nov 22 17:04:36 then squash + jffs Nov 22 17:04:41 that was 'just magic' Nov 22 17:04:56 but that first boot, when it initializes a gig of jffs Nov 22 17:04:59 takes forever Nov 22 17:23:49 build #796 of cobalt is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/796 Nov 22 17:33:04 build #801 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/801 Nov 22 17:46:03 build #255 of cns21xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/255 Nov 22 17:54:33 groz: I think there was a recent ticket that reported long jffs initialization time or a mailing list thread Nov 22 17:56:30 on a large drive, it'll always be long, because it does the init, by erasing everything Nov 22 17:56:39 this is why I want to switch my overlay to something else Nov 22 18:01:15 hmmm, now I've got it to work, but Nov 22 18:01:19 jumped thru some hoops Nov 22 18:01:38 i have a very small jffs along with the squash, mapped as an mtd using block2mtd Nov 22 18:01:52 after it boots that way, I stuffed in an fstab config Nov 22 18:02:02 now it switches to the ext4 for my overlay Nov 22 18:02:12 but, with that fstab defined in the original squash Nov 22 18:02:17 it doesn't seem to do it Nov 22 18:20:00 build #254 of realview is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/realview/builds/254 Nov 22 18:54:31 build #805 of atheros is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/805 Nov 22 19:13:34 build #363 of imx6 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/imx6/builds/363 Nov 22 19:20:14 well this is interesting, but, I did get it to work, at least the end result is what I wanted Nov 22 19:20:43 map /dev/sda2 using bloc2mtd to create an mtd partition, with the squashfs in there Nov 22 19:21:01 then have the config/fstab pre-set for /overlay on /dev/sda3 Nov 22 19:21:29 it does end up after jumping around abit, with overlay on /dev/sda3 Nov 22 19:21:44 but, if I just set /dev/sda2 as root, with the same squashfs in that parition Nov 22 19:21:46 it does not Nov 22 19:28:38 boots fine from the squash, but never processes the overlay stuff Nov 22 19:29:03 build #798 of lantiq is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/798 Nov 22 19:33:34 build #787 of ramips is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/787 Nov 22 20:28:11 build #254 of pxa is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/254 Nov 22 20:43:19 <_trine> jow_laptop, if my Dockstar is compiled without a firewall do I need to set a route for the openvon to work on it Nov 22 20:43:53 <_trine> my openvpn connects ok but I cannot get to the net Nov 22 20:44:01 <_trine> from my phone Nov 22 20:59:08 build #140 of ramips.rt3883 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.rt3883/builds/140 Nov 22 21:32:15 build #781 of ppc40x is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/781 Nov 22 21:40:14 build #254 of malta is complete: Exception [exception compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/malta/builds/254 Nov 22 21:42:49 build #321 of mvebu is complete: Exception [exception compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/321 Nov 22 22:09:42 build #224 of adm8668 is complete: Exception [exception compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/224 Nov 22 23:40:23 build #215 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/215 Nov 22 23:43:50 build #580 of octeon is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/580 **** ENDING LOGGING AT Sun Nov 23 03:00:00 2014