**** BEGIN LOGGING AT Thu Nov 27 02:59:59 2014 Nov 27 07:27:44 cyrus r43400 trunk/package/network/config/netifd/Makefile * netifd: correctly handle source-parameter for IPv4 routes Nov 27 14:29:09 kaloz r43401 trunk/target/ (10 files in 10 dirs) * [ar71xx]: add D-link DGL-5500 A1 support Nov 27 15:03:30 nbd r43402 trunk/tools/firmware-utils/src/tplink-safeloader.c * firmware-utils: remove dependency on error.h in tplink-safeloader Nov 27 15:03:40 nbd r43403 trunk/target/linux/cns3xxx/ patches-3.14/120-backport_pcie_topology_fix.patch patches-3.14/110-pci_isolated_interrupts.patch * cns3xxx: fix pcie root bridge topology Nov 27 15:03:46 nbd r43404 trunk/target/linux/generic/patches-3.14/220-gc_sections.patch * kernel: keep __bug_table with gc-sections Nov 27 16:25:59 nbd r43405 trunk/target/linux/generic/patches-3.18/220-gc_sections.patch * kernel: add missing KEEP() statements for gc-sections patch in 3.18 Nov 27 16:26:06 nbd r43406 trunk/target/linux/cns3xxx/ (26 files in 2 dirs) * cns3xxx: add experimental 3.18 support Nov 27 16:36:58 nbd r43407 trunk/package/kernel/mt76/Makefile * mt76: fix a compile error on 3.18 Nov 27 17:27:41 nbd r43408 trunk/package/kernel/mac80211/files/regdb.txt * mac80211: update regdb to master-2014-11-18 Nov 27 17:33:44 build #582 of octeon is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/582 Nov 27 18:27:34 nbd r43409 trunk/target/ (6 files) * kernel: backport patches for overriding PHY reset to 3.14 Nov 27 18:27:40 nbd r43410 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * ar8216: suppress PHY reset for linux 3.14 Nov 27 18:27:47 nbd r43411 trunk/target/linux/mpc85xx/patches-3.14/750-phy_reset_anenable.patch * mpc85xx: remove the PHY reset change patch (no longer necessary) Nov 27 18:27:53 nbd r43412 trunk/target/ (5 files) * mpc85xx: refresh linux 3.14 patches Nov 27 18:27:59 nbd r43413 trunk/target/linux/mpc85xx/Makefile * mpc85xx: update to linux 3.14 Nov 27 18:28:14 build #217 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/217 Nov 27 18:31:20 build #758 of ppc44x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/758 Nov 27 20:16:41 jow_laptop, how do you force multivalue field defaults ? Nov 27 20:16:59 I set the .delimiter and .default Nov 27 20:17:32 but if I remove all the value from the fields (checkbox widget) it does not save the default value Nov 27 20:17:46 nor does it set the checkbox multivalues to their defaut Nov 27 20:17:51 (LUCI related) Nov 27 20:20:26 build #226 of adm8668 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/226 Nov 27 20:33:01 hey guuuys Nov 27 20:43:21 Hi guys Nov 27 20:43:33 anyone noticed that OpenWRT does NOT work on new rb951g? Nov 27 20:43:40 I'm just about try bleeding edge Nov 27 20:43:57 I can't even get ramfs kernel on the router Nov 27 20:44:12 well dnsmasq says sent, but I can't ping the router or get a DHCP lease Nov 27 20:55:53 nbd r43414 trunk/target/linux/cns3xxx/patches-3.14/121-pcie_fix_bridge_access.patch * cns3xxx: fix PCIe->PCI bridge access (fixes #18422) Nov 27 20:59:19 ls Nov 27 21:01:31 No such file or directory Nov 27 21:01:48 is sata normally supported in uboot or is it a option you hae to set Nov 27 21:02:03 hae/have Nov 27 21:02:25 I think I about have this board patched and ported Nov 27 21:05:30 but I have to find where to put the u-boot patches Nov 27 21:10:45 probably package/boot/uboot-/patches Nov 27 21:10:55 cd yeah just found it Nov 27 21:11:03 but now to name them correctly Nov 27 21:11:27 man who know so much work went into porting a new board Nov 27 21:11:44 and no one to go over it and give pointers Nov 27 21:12:04 so far only working on kernel 3.14.18 Nov 27 21:12:04 afaik there are some guideline - sth like 001-099 for build system/fixes ; 100 for features/removal or so Nov 27 21:12:11 is all I have patched for Nov 27 21:13:14 how do I fine what ver of the u-boot is used Nov 27 21:13:55 makefile has a version - afaik current uboot has datelike structure 2014.10 as ver nr Nov 27 21:14:30 so not 2015 Nov 27 21:14:40 u-boot-2015.01-rc2 Nov 27 21:15:57 u-boot-2014.04.tar.bz2 Nov 27 21:16:01 looks like Nov 27 21:24:15 tmp/info/.packageinfo-boot_uboot-sunxi:Source: u-boot-2014.04.tar.bz2 Nov 27 21:24:36 would make it seem to use this outdated version Nov 27 21:24:39 geesh Nov 27 21:34:32 new is not necessarily better / improved / stable :) Nov 27 21:46:22 well the bananapi is in 2014.10 Nov 27 21:46:32 so it would be a good move to move to it Nov 27 21:48:07 you would think the build would use 1 default version Nov 27 21:48:11 or does it ? Nov 27 21:48:31 rneese: normally uboot on embedded devices is not overwritten with newer code - there are some nice mods like pepe2k ar71xx uboot mod Nov 27 21:48:40 or does it use a diff version for the build based on the board Nov 27 21:49:17 well I am just trying to get the board in the u-boot Nov 27 21:49:44 its the last of the patches I am hoping Nov 27 21:50:36 so I can get this build going and tested Nov 27 21:50:51 I think u-boot is all I have left to get patched Nov 27 21:52:42 lust have to find someone to go over the patches and src changes Nov 27 21:54:35 also have to find how to add in sata into the u-boot options Nov 27 21:54:47 since there is no nand on the board Nov 27 21:55:09 so I can boot sd and mount sata Nov 27 21:55:58 i think uboot uses drivers similar to linux kernel - there might even be some sata patches (maybe for different controller) available Nov 27 21:56:12 bananapi uboot should be in some repo for example Nov 27 21:56:30 its in the 2014.10 Nov 27 21:56:31 dunno if the apu1d uses uboot Nov 27 21:57:24 the amd-apu1 Nov 27 21:57:27 no Nov 27 21:57:37 its pc x86/amd64 based Nov 27 22:04:55 ,SATAPWR=SUNXI_GPB(8) Nov 27 22:05:00 was missiing Nov 27 22:05:10 so that should give me sata Nov 27 22:05:14 ls Nov 27 23:56:51 build #721 of sibyte is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/721 Nov 28 00:22:19 Hi guys Nov 28 00:23:17 I've got a new batch of rb951g they ar71xxx platform from Mikrotik. I've had OpenWRT running on them for ages. But for some reason the initrd kernel is not pingable and I can't get a DHCP lease from it either. Nov 28 00:23:31 I would say its dead, but I occasionally see it respond to ARP requests Nov 28 00:23:38 I'm pretty sure this is the same issue as this: https://dev.openwrt.org/ticket/18227 Nov 28 00:24:07 and the guy called 0xexception is saying here http://forum.mikrotik.com/viewtopic.php?f=2&t=86802 Nov 28 00:24:21 its clearly a new issue, to do with new batches Nov 28 00:24:38 I was wondering if anyone had many progress on this and if not could anyone offer some tips for me on how to tackle it Nov 28 00:25:06 I'm happy patching the kernel,etc only problem is this board doesn't have serial. So I don't really know what I can possibly do if I can't telnet. What do you guys normally do? Nov 28 00:25:07 ty Nov 28 00:28:52 I'm going to leave my computer on over night, if you have any info please message me publicly or pm. I really don't have a clue on the next step, the fact that the occasional arp is getting through makes me think its a misconfigured switch issue perhaps? Anyway any information at all would be really apprecaited. I'm going to work night n day when I wake up to fix this Nov 28 00:28:59 cheers Nov 28 00:36:54 the board shots on the wiki clearly show serial & jtag pads Nov 28 00:40:54 cyrus r43415 trunk/package/network/ipv6/odhcp6c/Makefile * odhcp6c: avoid busylooping with strangely behaving dhcpv6 servers Nov 28 00:43:59 cyrus r43416 branches/barrier_breaker/package/network/ipv6/odhcp6c/Makefile * odhcp6c: backport from trunk to fix busyloop Nov 28 00:59:07 build #733 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/733 Nov 28 01:01:19 swalker: I@m going off what their tech suppourt said Nov 28 01:01:32 nbd r43417 trunk/scripts/config.sub Nov 28 01:01:32 scripts/config.sub: add back musl support that was accidentally dropped in r43353 Nov 28 01:31:15 florian r43418 trunk/package/ devel/perf/Makefile devel/perf * devel: import perf from oldpackages Nov 28 01:31:26 florian r43419 trunk/target/linux/generic/patches-3.18/644-bridge_optimize_netfilter_hooks.patch * kernel: 3.18: Fix patch 644 dependency chain Nov 28 01:32:15 florian r43420 packages/devel/perf * perf: move to trunk **** ENDING LOGGING AT Fri Nov 28 02:59:58 2014