**** BEGIN LOGGING AT Sun Feb 22 02:59:59 2015 Feb 22 03:33:40 build #306 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/306 Feb 22 08:28:44 blogic r44499 trunk/target/linux/ramips/base-files/etc/diag.sh * ramips: nexx wt3020: fix status led Feb 22 08:28:49 blogic r44500 trunk/target/linux/ramips/rt288x/config-3.18 * ramips: rt288x: add missing symbol Feb 22 08:28:56 blogic r44501 trunk/target/linux/mpc85xx/patches-3.18/142-add-mpic-timer-clock-frequency.patch * mpc85xx: add mpic timer clock frequency to avoid boot log warning Feb 22 08:29:08 blogic r44502 trunk/ target/linux/generic/config-3.18 package/kernel/linux/modules/usb.mk * kernel: Fix USB gadget modules for v3.18 Feb 22 08:29:09 build #820 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/820 Feb 22 08:29:14 blogic r44503 trunk/target/linux/ipq806x/config-3.18 * ipq806x: enable watchdog kernel option Feb 22 08:29:22 blogic r44504 trunk/target/linux/ipq806x/patches/ 012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch 011-watchdog-qcom-use-timer-devicetree-binding.patch 013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch * ipq806x: fix "reboot" command Feb 22 08:29:27 blogic r44505 trunk/target/linux/ipq806x/config-3.14 * ipq806x: delete config-3.14 file Feb 22 08:29:34 blogic r44506 trunk/package/network/ utils/comgt/patches/004-check_tty.patch utils/comgt/Makefile utils/comgt/patches/002-termios.patch * comgt: Use TCGETS and TCSETS ioctls for struct termios Feb 22 08:29:42 blogic r44507 trunk/package/network/services/ppp/files/ppp.sh * ppp: Allow PPTP over a specified interface Feb 22 09:41:38 build #218 of ar71xx.mikrotik is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/218 Feb 22 09:52:31 build #860 of uml is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/860 Feb 22 11:11:34 build #900 of at91 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/900 Feb 22 12:56:12 build #77 of ramips.mt7621 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/77 Feb 22 15:06:31 build #78 of ipq806x is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ipq806x/builds/78 Feb 22 15:46:13 build #345 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/345 Feb 22 16:31:00 build #725 of adm5120 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/725 Feb 22 19:19:59 updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html Feb 22 20:52:02 build #327 of mpc83xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/327 Feb 22 21:51:59 hmmm.... Feb 22 21:52:40 was there any effort to get the tcom speedport 921V into openwrt? Feb 22 21:56:15 roh: nothing visible; it's also a rather locked device (bootloader requires "signed" images); small flash (32 MiB NAND), unsupported wifi (lantiq wave 300, "recently" open sourced driver requiring non-free firmware with license disallowing redistribution) Feb 22 21:56:58 KanjiMonster: yeah.. a bit sucky.. i just got some around.. and it has dect Feb 22 21:57:21 right, and s0-bus Feb 22 21:57:23 i'd like some dect bases to be supported to find a way get the linux dect stack there Feb 22 21:57:26 yupo Feb 22 21:57:28 -o Feb 22 21:57:50 not sure if the dect driver is open source Feb 22 21:58:23 dunno about the one tcom uses.. but there is the osmocom stack from patrick mc hardy Feb 22 21:58:28 (the 921v doesn't run linux at all) Feb 22 21:58:55 need to check which dect hw they use, but the hw driver is not that big for dect Feb 22 22:00:32 KanjiMonster: got any other idea for a widely avail. platform with dect hw? Feb 22 22:00:32 lantiq has its own dect chip Feb 22 22:00:59 no idea Feb 22 22:01:20 build #733 of ep93xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/733 Feb 22 22:01:32 I would assume most use broadcom, and that is the opposite of open source ;p Feb 22 22:07:27 KanjiMonster: for dect? nah.. there are not many vendors.. i know of 3 Feb 22 22:09:00 ah.. broadcom uses the sitel stuff Feb 22 22:09:45 there is also dspg and dialog semiconductor Feb 22 22:45:03 KanjiMonster: i'd like to help improve the "new device" documentation -- when's a good time to do it so i can bother you wiht questions as i go? :) Feb 22 23:23:44 jdub: I'm in CET, so whenever it's daytime is likely a reasonably good time, and when it's late night a bad one ;) Feb 22 23:25:14 late night right now, so bad time :P Feb 22 23:25:15 hehe Feb 22 23:25:44 right, I might now decide any minute to go to bed ;) Feb 22 23:26:18 if I remember correctly you are entering spring now, no? Feb 22 23:27:12 technically it's still winter for about a month, practically we are already at +9 degrees the last few days, and weather prognose says it will stay so Feb 22 23:27:37 assuming you are talking about climate and not java based web frameworks Feb 22 23:27:37 +9C is ok, good temperature to sleep :P Feb 22 23:27:43 heheh Feb 22 23:27:46 climate, yes Feb 22 23:28:02 do you also mess with java? heh Feb 22 23:34:14 sometimes Feb 22 23:35:44 nice, you are non stoppable :P Feb 23 00:06:45 build #890 of cobalt is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/890 Feb 23 00:28:50 build #323 of brcm2708 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/brcm2708/builds/323 Feb 23 00:41:13 build #323 of cns3xxx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/cns3xxx/builds/323 Feb 23 00:46:33 build #905 of brcm47xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/905 Feb 23 01:05:40 build #892 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/892 **** ENDING LOGGING AT Mon Feb 23 02:59:59 2015