**** BEGIN LOGGING AT Fri Mar 13 02:59:59 2015 Mar 13 03:00:08 nbd r44716 trunk/target/linux/atheros/patches-3.18/100-board.patch * atheros: v3.18: relocate PCI host DMA base definition Mar 13 03:00:20 nbd r44717 trunk/target/linux/ atheros/patches-3.18/100-board.patch atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: rearrange PCI regs definitions Mar 13 03:00:33 nbd r44718 trunk/target/linux/atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: move PCI enable code to arch Mar 13 03:00:44 nbd r44719 trunk/target/linux/atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: add context container for PCI driver Mar 13 03:01:07 nbd r44720 trunk/target/linux/ atheros/patches-3.18/100-board.patch atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: remap PCI controller MMR memory Mar 13 03:01:17 nbd r44721 trunk/target/linux/atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: pass PCI IRQ and I/O mem via resources Mar 13 03:01:23 nbd r44722 trunk/target/linux/atheros/patches-3.18/100-board.patch * atheros: v3.18: cleanup register headers Mar 13 03:01:28 nbd r44723 trunk/target/linux/ atheros/patches-3.18/103-ar2315_gpio.patch atheros/patches-3.18/100-board.patch atheros/patches-3.18/102-ar5312_gpio.patch atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: remap main SoC MMR memory Mar 13 03:01:35 nbd r44724 trunk/target/linux/ atheros/patches-3.18/101-early-printk-support.patch atheros/patches-3.18/100-board.patch atheros/patches-3.18/210-reset_button.patch * atheros: v3.18: make registers headers local Mar 13 03:01:41 nbd r44725 trunk/target/linux/ atheros/patches-3.18/100-board.patch atheros/patches-3.18/103-ar2315_gpio.patch atheros/patches-3.18/102-ar5312_gpio.patch atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: remap flash for boardconfig parsing Mar 13 03:01:47 nbd r44726 trunk/target/linux/ atheros/patches-3.18/100-board.patch atheros/patches-3.18/101-early-printk-support.patch atheros/patches-3.18/102-ar5312_gpio.patch atheros/patches-3.18/105-ar2315_pci.patch * atheros: v3.18: update register names Mar 13 03:01:56 nbd r44727 trunk/target/linux/ (6 files in 2 dirs) * atheros: v3.18: switch to IRQ domain Mar 13 03:02:01 nbd r44728 trunk/target/linux/ (5 files) * atheros: v3.18: move GPIO patches behind PCI Mar 13 03:02:06 nbd r44729 trunk/target/linux/ (9 files) * atheros: v3.18: rearrange code between patches Mar 13 03:02:14 nbd r44730 trunk/target/linux/ (9 files) * atheros: v3.18: cleanup includes Mar 13 03:02:24 nbd r44731 trunk/target/linux/ (6 files) * atheros: v3.18: non-functional cleanup Mar 13 03:02:32 nbd r44732 trunk/target/linux/ (6 files) * atheros: v3.18: renumber backported patches Mar 13 03:02:36 nbd r44733 trunk/target/linux/atheros/Makefile * atheros: switch to 3.18 Mar 13 03:02:41 nbd r44734 trunk/target/linux/ atheros/patches-3.14 atheros/config-3.14 * atheros: remove linux 3.14 Mar 13 03:02:45 nbd r44735 trunk/target/linux/atheros/image/Makefile * atheros: remove odd board check during image build Mar 13 03:02:53 nbd r44736 trunk/ (38 files in 15 dirs) * Rename 'atheros' target to 'ath25' Mar 13 03:02:58 nbd r44737 trunk/target/linux/ath25/Makefile * ath25: set myself as maintainer Mar 13 03:09:52 build #906 of atheros is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/906 Mar 13 03:20:09 is anyone familiar with running openwrt on qemu-system-mips? Mar 13 03:47:07 build #901 of cobalt is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/901 Mar 13 05:05:12 tmp/.config-package.in:55800:error: recursive dependency detected! Mar 13 05:05:13 tmp/.config-package.in:55800: symbol PACKAGE_freeswitch depends on PACKAGE_freeswitch-mod-perl Mar 13 05:05:13 tmp/.config-package.in:56933: symbol PACKAGE_freeswitch-mod-perl is selected by PACKAGE_freeswitch-mod-verto Mar 13 05:05:13 tmp/.config-package.in:57675: symbol PACKAGE_freeswitch-mod-verto depends on PACKAGE_freeswitch Mar 13 05:17:31 nbd r44738 trunk/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch * mac80211: fix a pointer handling error in the new tx queueing code Mar 13 05:37:43 build #353 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/353 Mar 13 05:43:38 Hi openwrt Mar 13 05:44:11 what's the procedure for submitting patches? Mar 13 05:53:37 there's a page about that on dev.openwrt.org Mar 13 05:54:05 generally, git format-patch to the devel list Mar 13 06:30:03 greetings Mar 13 06:30:40 what permissions do I need to be able to close a ticket at dev.openwrt.org ? Mar 13 06:30:59 I contributed this http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=beed4d82d6a0154b0cd5f7b84e2180215ace6718 and it was accepted Mar 13 06:31:51 so I updated http://wiki.openwrt.org/toh/alfa.network/hornet-ub#gpio accordingly Mar 13 06:32:18 and would also close the two tickets on dev.openwrt.org Mar 13 06:32:46 zajec, bforbes, KanjiMonster: ^ Mar 13 06:33:47 DonkeyHotei: thanks Mar 13 06:34:44 anybody know how to find the serial port on the 1900ac? Mar 13 06:39:06 i cant figure out how to get the case apart Mar 13 06:47:03 smoofra: http://wiki.openwrt.org/toh/linksys/wrt1900ac Mar 13 06:48:01 yea, i saw that Mar 13 06:48:12 but i can't figure out how to get case fully open Mar 13 06:48:37 also found this Mar 13 06:48:39 https://github.com/Chadster766/McWRT/wiki/Linksys-WRT1900AC-Serial-Port Mar 13 06:48:53 but i can't figure out how to "Dismount the upper middle black cover" Mar 13 06:54:35 smoofra: maybe ask nitroshift in #openwrt ? he has a wrt1900ac and maybe he opened it for research/attaching stuff since he is researching network drivers on that box Mar 13 06:54:51 thanks! Mar 13 08:09:35 build #872 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/872 Mar 13 08:23:01 jberg: thanks Mar 13 08:38:14 blogic r44739 trunk/target/linux/ramips/dts/CY-SWR1100.dts * ralink: add wifi 5g dts info for cy-swr1100 Mar 13 08:38:26 blogic r44740 trunk/target/linux/ (6 files) * ralink: use random generate mac address instead of default one. Mar 13 08:38:32 blogic r44741 trunk/target/linux/ ramips/files/drivers/net/ethernet/ralink/ralink_ethtool.c ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c * ralink: support change tx/rx ring size Mar 13 08:38:42 blogic r44742 trunk/package/network/utils/ipset/Makefile * ipset: add ipmark support Mar 13 08:38:51 blogic r44743 trunk/package/network/ services/lldpd/Config.in services/lldpd/Makefile * lldpd: make LLDP-MED, DOT1 and DOT3 extensions disable-able Mar 13 08:39:02 blogic r44744 trunk/package/network/services/dnsmasq/files/dnsmasq.init * dnsmasq: Make parameters optional in dhcpboot config Mar 13 08:39:12 blogic r44745 trunk/package/network/services/relayd/Makefile * relayd: bump to latest git HEAD Mar 13 08:39:21 blogic r44746 trunk/package/ utils/busybox/Makefile utils/busybox/config/networking/Config.in * BusyBox: Netcat 1.10 compatibility require server option Mar 13 08:39:34 blogic r44747 trunk/package/network/services/dnsmasq/files/dnsmasq.init * dnsmasq: enable pxe-prompt, pxe-service config options Mar 13 09:45:09 hmm. wgt634u appears hosed, after flash with recent trunk, dies at: Starting program at 0x80001000 Mar 13 10:17:27 russell--: can you debug this? Mar 13 10:18:01 russell--: start with enabling early printk Mar 13 10:18:23 this is quite ugly device... Mar 13 10:57:53 build #900 of orion is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/900 Mar 13 11:35:31 russell--: did you ever run test tlsdate from https://lists.openwrt.org/pipermail/openwrt-devel/2013-April/019829.html? getting cert validation failure with my http://pastebin.com/raw.php?i=QZE0bH0G Mar 13 13:07:37 russell--: ? Mar 13 14:37:24 nbd: around? Mar 13 18:08:35 what takes the options in config/Config-kernel.in and changes them into actual lines in a kernel .config ? Mar 13 19:39:05 build #833 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/833 Mar 13 20:14:55 build #546 of mpc85xx is complete: Failure [failed compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/546 Mar 13 20:25:19 swalker: that was so long ago, i have no memory of having run tested. Mar 13 20:26:43 zajec: thanks, i'll investigate. the first one i experimented with i couldn't recover to working image. Mar 13 20:27:40 i wonder if something is stomping on the CFE or some other critical part. CFE printenv showed normal looking data. Mar 13 20:51:53 zajec, yeah, i bricked this one too. now i get no CFE console at power up, nothing. Mar 13 21:42:33 nbd: I figured out that the cryptoapi is requesting a module it can't find, so the add_key call is returning a -2 Mar 13 22:13:31 build #316 of omap is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/316 Mar 13 22:55:40 russell--: shit Mar 13 22:55:57 russell--: that's bad enough then :/ Mar 13 22:56:16 russell--: i wonder if this could be related to this stupid (lack of) NVRAM Mar 13 22:59:28 zajec: it is kind of bad, yes Mar 13 23:00:00 the flash layout is different than normal Mar 13 23:00:53 it does have nvram, but iirc, it is accessed differently that other brcm47xx routers of the day Mar 13 23:01:44 * russell-- has some history of tracking down breakage from Hauke, he may have bad memories of that ;-) Mar 13 23:03:38 breakage? Mar 13 23:03:43 so there was some problem earlier? Mar 13 23:04:22 there has been historically, it gets fixed and the broken, and then fixed and then broken. Mar 13 23:05:02 ;) Mar 13 23:06:00 it was working as recently as r42830 Mar 13 23:08:12 [ 1.050000] 0x000000000000-0x0000000a0000 : "boot" Mar 13 23:08:12 [ 1.060000] 0x0000000a0000-0x0000007e0000 : "firmware" Mar 13 23:08:12 [ 1.080000] 0x0000000a001c-0x0000000a090c : "loader" Mar 13 23:08:12 [ 1.100000] 0x0000000a090c-0x0000001aa000 : "linux" Mar 13 23:08:26 [ 1.120000] 0x0000001aa000-0x0000007e0000 : "rootfs" Mar 13 23:08:36 [ 1.160000] 0x000000580000-0x0000007e0000 : "rootfs_data" Mar 13 23:08:36 [ 1.180000] 0x0000007e0000-0x000000800000 : "nvram" Mar 13 23:08:55 is the flash map afaict on that running device Mar 13 23:09:15 git log --oneline 4934a03cda29a140e6d82fbb0c3e22fe71d7153f..master target/linux/brcm47xx/ Mar 13 23:09:20 doesn't show too much Mar 13 23:09:29 27ad8cb brcm47xx: image: create initramfs TRX nodictionary images Mar 13 23:09:36 4475136 [PATCH] brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki) Mar 13 23:09:48 9019803 brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init) Mar 13 23:09:49 the problem tends to be that the flash map changes and the next flash fails or writes over something that CFE needs Mar 13 23:09:52 three potenial problems Mar 13 23:09:56 can't see anything else Mar 13 23:10:00 it could be the 3rd one Mar 13 23:10:10 there have also been periodic problems with serial console Mar 13 23:10:45 there was a patch that remapped ttyS0 and ttyS1 or something vaguely like that Mar 13 23:10:45 "the next flash fails or writes over something that CFE needs" Mar 13 23:10:51 CFE can live even without NVRAM I believe Mar 13 23:10:55 at least it shuld Mar 13 23:11:07 so only overwritign CFE would really brick the board Mar 13 23:11:25 russell--: we still have this patch Mar 13 23:11:26 on the wgt634u, CFE needs to pull some boot parameters out of a chunk of flash Mar 13 23:11:37 macaddrs etc Mar 13 23:13:55 zajec: some very early bcm47xx don't have a proper backup nvram in CFE and can be bricked by erasing the nvram Mar 13 23:14:39 it was possible to restore the needed settings from CFE Mar 13 23:14:52 * russell-- has instructions to himself Mar 13 23:15:03 KanjiMonster: i see... but even http://wiki.openwrt.org/toh/netgear/wgt634u says CFE should start without NVRAM (env) Mar 13 23:15:12 and it should be possible to re-create it using CFE's setenv command Mar 13 23:15:45 https://personaltelco.net/wiki/WgtRecovery Mar 13 23:16:24 seems like the same... Mar 13 23:16:30 but it assumes CFE is working Mar 13 23:17:05 yeah, on bricked device #2 i have no CFE Mar 13 23:18:15 russell--: try to dump CFE in the first place if possible... Mar 13 23:18:26 so you can always at least re-program it using JTAG Mar 13 23:18:26 oh, i have lots of devices Mar 13 23:18:33 haha Mar 13 23:18:33 and full images archived Mar 13 23:19:11 i'm more interested in figuring out what went wrong so we can prevent me having more devices to play with JTAG on Mar 13 23:19:56 russell--: the most likely to cause some problems is Mar 13 23:19:58 9019803 brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init) Mar 13 23:20:22 testing one commit earlier than above could give us some hint Mar 13 23:20:28 anything brcm47xx and nvram and clean sounds suspicious ;-) Mar 13 23:23:22 this WRT634 code should have been cleaned long time ago... Mar 13 23:23:30 WGT Mar 13 23:32:36 older flash map for wgt634u: Mar 13 23:32:39 [ 0.884000] 0x000000000000-0x0000000a0000 : "cfe" Mar 13 23:32:39 [ 0.900000] 0x0000000a0000-0x0000007e0000 : "linux" Mar 13 23:32:39 [ 0.912000] 0x000000189400-0x0000007e0000 : "rootfs" Mar 13 23:32:53 anything brcm47xx and nvram and clean sounds suspicious ;-)[ 0.956000] 0x0000005e0000-0x0000007e0000 : "rootfs_data" Mar 13 23:32:56 [ 0.968000] 0x0000007e0000-0x000000800000 : "nvram" Mar 13 23:33:00 gah Mar 13 23:33:06 scrollwheel-- Mar 13 23:36:38 the layout of the nvram partition is "unusual" on wgt634u Mar 13 23:45:36 build #93 of arm64 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/arm64/builds/93 Mar 14 01:28:47 bforbes: what module is it requesting? Mar 14 01:55:28 zajec: r43978 seems okay (git commit b7a0628416b943aea503199624dbbd39bbe5017b) on wgt634u Mar 14 02:01:03 nbd r44748 trunk/package/kernel/mac80211/patches/ 300-mac80211-add-an-intermediate-software-queue-implemen.patch 301-mac80211-lock-rate-control.patch * mac80211: improve powersave handling in the tx queue rework patch Mar 14 02:01:09 nbd r44749 trunk/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch * mac80211: fix a rounding issue in minstrel MCS rate duration calculation Mar 14 02:01:15 nbd r44750 trunk/package/kernel/mac80211/patches/070-ath_common_config.patch * ath: fix selecting the module individually (#19162) **** ENDING LOGGING AT Sat Mar 14 02:59:59 2015