**** BEGIN LOGGING AT Mon May 11 02:59:58 2015 May 11 03:02:44 build #786 of mcs814x is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/786 May 11 03:33:10 build #394 of cns3xxx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/cns3xxx/builds/394 May 11 03:47:41 build #930 of x86 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/930 May 11 03:48:58 build #857 of ixp4xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/857 May 11 03:52:29 build #153 of arm64 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/arm64/builds/153 May 11 03:54:28 build #883 of xburst is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/883 May 11 03:56:52 build #949 of cobalt is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/949 May 11 03:59:27 build #400 of cns21xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/400 May 11 04:01:59 build #946 of orion is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/946 May 11 04:29:54 build #774 of gemini is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/774 May 11 04:32:12 build #388 of sunxi is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/sunxi/builds/388 May 11 05:02:46 rmilecki: did you do some work on the wrt350n v1 recently? well, it still doesn't boot May 11 05:06:26 build #366 of omap is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/366 May 11 05:06:48 build #793 of adm5120 is complete: Failure [failed compile_7] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/793 May 11 05:11:18 build #399 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/399 May 11 05:13:52 build #290 of brcm63xx.smp is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx.smp/builds/290 May 11 05:24:31 build #508 of mxs is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/mxs/builds/508 May 11 05:37:04 build #151 of netlogic is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/netlogic/builds/151 May 11 05:47:31 build #282 of lantiq.xrx200 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq.xrx200/builds/282 May 11 07:29:21 build #931 of uml is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/931 May 11 07:40:19 build #968 of at91 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/968 May 11 07:56:38 build #851 of kirkwood is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/851 May 11 08:02:41 DonkeyHotei: hey, my WRT350N v1.0 was working fine May 11 08:02:44 last time I tried it May 11 08:02:46 weird :| May 11 08:03:02 DonkeyHotei: does anything appears in the boot log in serial console? May 11 08:03:45 rmilecki: bootloader only May 11 08:05:40 DonkeyHotei: can you build OpenWrt on your own? May 11 08:05:53 this is my own build May 11 08:05:57 DonkeyHotei: great May 11 08:06:09 DonkeyHotei: can you enable KERNEL_EARLY_PRINTK and compile again? May 11 08:11:56 rmilecki: there is no such option on mips, only arm May 11 08:12:43 DonkeyHotei: really? sec May 11 08:15:14 DonkeyHotei: please use "make kernel_menuconfig" and there find EARLY_PRINTK and select it May 11 08:15:44 i'll just manually insert it into the config May 11 08:15:45 DonkeyHotei: you're right, OpenWrt doesn't have any friendly option for enabling kernel's EARLY_PRINTK, so you have to use kernel_menuconfig May 11 08:15:51 DonkeyHotei: will work as well :) May 11 08:22:03 build #817 of au1000 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/817 May 11 08:32:29 rmilecki: that EARLY_PRINTK on arm dependency should be removed since many other platforms do seem to support it May 11 08:32:39 that arm dependency May 11 08:33:05 build #390 of adm8668 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/390 May 11 08:35:03 build #304 of ar71xx.nand is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.nand/builds/304 May 11 08:40:35 build #386 of brcm2708 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm2708/builds/386 May 11 08:50:05 build #276 of x86.xen_domu is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/x86.xen_domu/builds/276 May 11 08:55:18 rmilecki: http://pastebin.com/XRPPPKir May 11 09:08:58 nbd r45670 trunk/include/image.mk May 11 09:08:58 build: add support for adding a per-device compile step in the new image building code May 11 09:09:21 nbd r45671 trunk/include/image.mk * build: make initramfs kernel builds depend on the image prepare step May 11 09:09:56 nbd r45672 trunk/target/linux/ar71xx/image/Makefile May 11 09:09:56 ar71xx: convert tl-wr741nd v1/v2 to new image building code, add infrastructure for building the loader May 11 09:17:49 build #483 of mvebu is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/483 May 11 09:18:54 nbd r45673 trunk/include/image.mk * build: disable initramfs build within image builder May 11 09:19:08 nbd r45674 trunk/include/image.mk * image: disable compile target within image builder May 11 09:29:40 rmilecki: http://pastebin.com/XRPPPKir May 11 09:33:21 build #290 of brcm47xx.mips74k is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.mips74k/builds/290 May 11 09:35:04 build #917 of rb532 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/917 May 11 10:02:21 build #34 of ath25 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ath25/builds/34 May 11 10:02:50 build #289 of ar71xx.mikrotik is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx.mikrotik/builds/289 May 11 10:10:23 build #417 of malta is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/malta/builds/417 May 11 10:12:36 build #136 of ramips.mt7620 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7620/builds/136 May 11 10:37:54 build #850 of ar71xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/850 May 11 10:55:02 build #302 of x86.kvm_guest is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/x86.kvm_guest/builds/302 May 11 12:04:49 Hi, I wanted to know if there is already a method to reverse the operating status of an LED with athxk. On channel #openrt said no. So I have to patch the driver. After some research I found a way: config.led_active_high. I might add a the value to board param struct and load the value from the DTS. And set the var to true on init. May 11 13:04:52 build #962 of brcm47xx is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/962 May 11 13:23:31 build #920 of ar7 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/920 May 11 14:22:18 build #398 of mpc83xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/398 May 11 14:22:29 build #941 of ppc40x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/941 May 11 14:22:35 build #803 of ep93xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/803 May 11 14:25:27 build #883 of avr32 is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/883 May 11 15:26:32 build #986 of brcm63xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/986 May 11 15:27:38 build #315 of brcm47xx.legacy is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.legacy/builds/315 May 11 15:52:31 build #134 of ipq806x is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ipq806x/builds/134 May 11 16:01:04 build #402 of bcm53xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/bcm53xx/builds/402 May 11 16:02:46 build #135 of ramips.mt7628 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7628/builds/135 May 11 16:05:29 build #760 of mpc52xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/760 May 11 16:14:19 ping rmilecki May 11 16:25:13 Is there an eta for the first rc for 15.05? May 11 16:30:32 jbennett: nothing official May 11 16:39:10 build #137 of ramips.mt7621 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/137 May 11 16:42:19 build #946 of lantiq is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/946 May 11 16:48:46 build #401 of realview is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/realview/builds/401 May 11 16:49:43 DonkeyHotei: pong, i got a busy day May 11 16:49:46 DonkeyHotei: saw your log May 11 16:49:54 DonkeyHotei: will ask you to test something, give me few minutes May 11 16:49:54 and? May 11 16:49:59 ok May 11 17:14:52 build #287 of ramips.rt3883 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.rt3883/builds/287 May 11 17:41:58 build #132 of oxnas is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/oxnas/builds/132 May 11 17:43:17 rmilecki: a few minutes? May 11 17:55:26 build #4 of x86.64 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/x86.64/builds/4 May 11 18:06:56 DonkeyHotei: sorry, i had to go to shop and forgot May 11 18:06:58 DonkeyHotei: lookng now May 11 18:11:17 build #508 of imx6 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/imx6/builds/508 May 11 18:12:41 DonkeyHotei: ok, there is what I need you to test May 11 18:12:49 DonkeyHotei: please do: "vim build_dir/target-*/linux-*/linux-*/drivers/ssb/driver_pcicore.c" May 11 18:12:59 DonkeyHotei: then find ssb_pcicore_init function May 11 18:13:14 DonkeyHotei: and add two pr_info calls like that: http://pastebin.com/mg4nLzdk May 11 18:13:52 DonkeyHotei: i suspect the hang happens in pcicore_is_in_hostmode, so these pr_info debugging messsages will tell us if i'm right May 11 18:30:21 [ 0.120000] Switched to clocksource MIPS May 11 18:30:21 [ 0.130000] Calling pcicore_is_in_hostmode May 11 18:30:21 [ 0.130000] pc->hostmode:1 May 11 18:30:25 rmilecki: ^ May 11 18:39:16 does anyone have any insight into my irregular led timer trigger on ramips-asiarf-awm002? May 11 18:40:47 DonkeyHotei: oh... so it hangs somewhere else :| May 11 18:41:01 DonkeyHotei: huh... I'll have to take a look at it again May 11 18:41:08 DonkeyHotei: unfortunately, most likely tomorrow May 11 18:41:13 ok May 11 18:42:28 rmilecki: technically it's a reboot not a hang May 11 18:42:38 DonkeyHotei: ohh, wait May 11 18:42:40 DonkeyHotei: really? May 11 18:42:45 yes May 11 18:42:48 DonkeyHotei: ok, so there is one more thing to try! May 11 18:43:04 DonkeyHotei: please do: "vim build_dir/target-*/linux-*/linux-*/drivers/ssb/driver_pcicore.c" and find this: May 11 18:43:08 if (pc->dev->bus->chip_id == 0x4704) May 11 18:43:09 usleep_range(1000, 2000); May 11 18:43:27 Please deplace it with some longer sleep May 11 18:43:41 Please try usleep(5000); May 11 18:43:48 (for the beginning) May 11 18:44:55 so, this? May 11 18:44:58 if (pc->dev->bus->chip_id == 0x4704) May 11 18:44:58 usleep(5000); May 11 18:45:16 rmilecki: ^ May 11 18:47:05 right May 11 18:47:12 * rmilecki leaving for a volleyball May 11 18:51:36 drivers/ssb/driver_pcicore.c: In function 'ssb_pcicore_init_hostmode': May 11 18:51:37 drivers/ssb/driver_pcicore.c:371:3: error: implicit declaration of function 'usleep' [-Werror=implicit-function-declaration] May 11 18:51:37 usleep(5000); May 11 18:51:40 rmilecki: ^ May 11 18:52:40 udelay maybe May 11 18:52:47 udelay(5000); i think May 11 18:52:57 and if that helps, then try udelay(2000); pleas May 11 18:54:01 build #858 of ixp4xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/858 May 11 18:58:33 rmilecki: no change with udelay(5000); May 11 19:09:45 build #931 of ramips is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/931 May 11 19:41:25 jow_laptop: Hey, have you gotten a chance to look at the pull request for luci-app-fwknopd? I'd like to get any problems fixed and get my recent fwknop work included with the upcoming 15.05 release, if possible. May 11 19:43:26 Hi, I'm woking on a patch for the ath9k driver so it can support "active high" using ath9k_platform_data. May 11 19:50:19 cyrus r45675 trunk/package/network/services/odhcpd/Makefile * odhcpd: remove invalid call to free() May 11 20:10:59 hi. how do I set an environment variable for make in an openwrt package Makefile? May 11 20:11:43 MAKE_FLAGS += ZT_DEBUG=1 #does not seem to work May 11 20:32:08 hi, anyone can help me to modify ath9 driver for a router? May 11 20:34:11 you'll need to be a lot more specific on what you really want/need to do :) May 11 20:37:08 karlp: me and hitech95 are trying to fix the led of a ath9k wifi card on a router. Normaly this card has the led in "active low state" but in our router is "active high". From the device tree we can't modify the operation state May 11 20:40:06 we have added a boolean on http://lxr.free-electrons.com/source/include/linux/ath9k_platform.h#L24, and we are loading the var on http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath9k/init.c May 11 20:41:40 karlp: We can not debug our changes. (we are not able to print in thelog) May 11 20:43:30 KanjiMonster told me: "hitech95: so you need to a) expand ath9k to allow setting the config through ath9k_platform_data; and b) enhance the lantiq patch for parsing the dts file to use the appropriate property to set the field" May 11 20:47:30 no one? May 11 20:48:31 DonkeyHotei: what do you mean by no change? May 11 20:48:42 DonkeyHotei: did it compile? did it reboot again? May 11 20:56:45 DonkeyHotei: udelay is OK, so it had to compile... May 11 20:56:46 hm May 11 20:58:10 DonkeyHotei: last try: please replace it with msleep(500); May 11 21:03:39 so, no one know how to debug a code on a kernel module... good. May 11 21:04:57 some one know how to debug a code on a kernel module? May 11 21:18:32 hitech95: printk()'s didn't appear? May 11 21:20:41 no... and we don't know why May 11 21:21:24 russell--: no... and we don't know why May 11 21:23:19 russell--: me and Dudu are trying to fix the led of a ath9k wifi card on a router. Normaly this card has the led in "active low state" but in our router is "active high". May 11 21:54:33 rmilecki: no change with msleep(500); May 11 21:55:26 DonkeyHotei: oh :( OK, I'll need to work on some better patch May 11 21:55:29 with more debugging May 11 21:55:37 DonkeyHotei: thanks for your testing May 11 21:55:47 yw May 11 21:56:33 i can't wait till this device runs a current owrt May 11 21:57:28 i want to see how it does with the newer brcm-wl May 11 21:58:20 i was pretty sure it's ready :| May 11 21:58:24 seems it was wrong :/ May 11 21:58:54 DonkeyHotei: ok, going sleep now May 11 21:58:55 goodnight May 11 21:59:36 gn May 11 23:36:51 build #918 of rb532 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/918 May 12 02:02:14 build #851 of ar71xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/851 **** ENDING LOGGING AT Tue May 12 02:59:59 2015