**** BEGIN LOGGING AT Fri May 22 02:59:58 2015 May 22 04:25:12 DonkeyHotei: it's an actiontec c2000a or something, but all that is doing is pppoe and a vlan tag thing May 22 04:25:26 so, i can remove it from the equation May 22 04:43:19 russell--: so it's ethernet on both sides? May 22 04:54:00 DonkeyHotei: the ONT on the side of the house converts fiber to ethernet May 22 04:54:13 what is on the fiber, i don't know first hand May 22 04:54:32 the CPE is just an ethernet thing doing NAT and VLAN and PPPoE May 22 04:55:02 * russell-- will probably eventually replace with something x86 that can fling packets faster May 22 04:55:07 so basically this "ONT" is the real cpe May 22 04:55:24 afaik it's just doing media conversion May 22 04:55:49 probably, if it's pppoe anyway May 22 04:55:50 although, it has some kind of dialtone generator, we have a land line that plugs into it as well May 22 04:56:22 * russell-- having some trouble with mwan3 atm May 22 04:56:23 MTA May 22 04:56:25 btw pppoe on gigabit fiber is just braindead May 22 04:57:03 if you got gig fiber, why do you still need mwan3? May 22 04:57:37 i have services on a DSL circuit, clink doesn't give me static ips or let me run mail servers, etc, afaik May 22 04:58:01 eventually i may see if my other isp will just tunnel the static ips to me May 22 04:58:38 i'd be happy to keep them in business, centurylink is horrible May 22 05:00:26 not to repeat my rant for the 47th time today, but i SPECIFICALLY said "do not touch the DSL service", halfway through the fiber install, the DSL circuit goes dead, 2+ hours on the phone they tell me "oh, yeah, we got a disconnect order, but luckily we cancelled it before it took effect!" /me stares at non-illuminated link lights and begs to differ May 22 05:01:41 didn't come back on until this morning, then the service technician that comes to the house to check on it (it clearly was not a physical problem) unplugs me to test, so i had another 15-20 minute outage for good measure. May 22 05:02:22 on at&t the link light does not go out even after a disconnect May 22 05:02:40 they clearly cut me off at the DSLAM May 22 05:02:53 which i explained to them May 22 05:02:54 DonkeyHotei: with uverse it does. May 22 05:03:27 i was not referring to their vdsl service May 22 05:03:39 they suggested i unplug the phone cord between the DSL modem and the wall and reverse it, to see if that would help, lol. I said, ooh, wait until i finish defragmenting my harddisk! May 22 05:04:44 * russell-- is curious what kind of ipv6 centurylink is providing, the actiontec seemed to think it had an ipv6 address, but i don't know if i can request an allocation from them. May 22 05:12:54 run http://test-ipv6.com/ through the actiontec May 22 05:13:41 see if it reports tunneling May 22 05:14:43 if it does not, try a stock owrt trunk on it May 22 05:15:15 (in place of the actiontec and without mwan3) May 22 05:20:31 oh wait, that won't work, pppoe May 22 06:35:33 build #5 of adm5120 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/5 May 22 07:11:24 build #6 of x86.xen_domu is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/x86.xen_domu/builds/6 May 22 08:06:59 build #6 of mpc83xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/6 May 22 08:35:15 build #6 of ep93xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/6 May 22 10:25:55 jogo r45712 trunk/package/network/ ipv6/ds-lite/Makefile ipv6/ds-lite/files/dslite.sh * ds-lite: fix resolve retry for fqdn peeraddrs May 22 11:35:43 build #6 of mpc52xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/6 May 22 11:40:28 ping nbd May 22 13:09:37 build #6 of brcm63xx.smp is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx.smp/builds/6 May 22 13:50:12 stintel: you forgot to sign-off your octeon patch May 22 13:51:50 arf May 22 13:52:52 hmm and now I forgot to add v2 May 22 15:04:38 KanjiMonster, stintel: you two are working on octeon? May 22 15:40:25 DonkeyHotei: I've only sent a few trivial patches May 22 19:25:27 build #6 of at91 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/6 May 22 19:52:38 build #8 of cns21xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/8 May 22 19:52:39 build #8 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/8 May 22 19:52:40 build #8 of cobalt is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/8 May 22 19:52:46 build #8 of orion is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/8 May 22 19:55:33 build #8 of ppc40x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/8 May 22 21:50:20 build #7 of arm64 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/arm64/builds/7 May 22 22:35:09 florian r45713 trunk/tools/gengetopt/patches/200-no_docs_tests.patch * tools: gengetopt: Disable doc and tests builds May 22 22:53:00 jogo r45714 trunk/target/linux/generic/config-3.18 * kernel: add missing generic config symbol May 22 22:53:02 jogo r45715 trunk/target/linux/arm64/config-default * arm64: enable new errata backported to 3.18 May 22 23:08:15 build #7 of avr32 is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/7 **** ENDING LOGGING AT Sat May 23 02:59:58 2015