**** BEGIN LOGGING AT Sun Jul 26 02:59:58 2015 Jul 26 03:16:55 build #75 of ramips is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/75 Jul 26 06:36:05 Hi all, so builds beyond around r46421 seem to be broken on the WD N750 ar71xx Jul 26 06:36:21 It seems to be about that time that it was switched to kerenl v4.1 Jul 26 06:37:47 I've tried all the way up to r46494 with no success. Jul 26 06:46:19 * russell-- just unboxed an tplink archer c7v2, trying to figure out what the console root password is Jul 26 06:47:22 russell--: tp-link's? it's in the docs Jul 26 06:48:18 russell--: tp-link's default is admin/admin Jul 26 06:49:21 Fishman: not at the serial console, typing admin gives me: admin Jul 26 06:49:21 login: no valid shadow password Jul 26 06:49:48 root/root? :P Jul 26 06:50:17 Login incorrect Jul 26 06:50:33 i've tried the obviousest ones, i think Jul 26 06:50:42 russell--: did you "(press tpl to enter U-Boot console on OEM firmware)" Jul 26 06:51:46 i don't want uboot, i want a shell login to the stock firmware Jul 26 06:52:13 are you sure the stock firmware offers a shell login? Jul 26 06:53:44 (that was an honest question, not sarcasm) Jul 26 06:54:16 Fishman: "Archer C7 login: " Jul 26 06:54:40 but they apparently have a super sekrit root passwd Jul 26 06:54:51 or one that isn't easily googleable Jul 26 06:56:23 my standard practice is to make a backup copy of flash and poke around before i write anything on a new device Jul 26 06:56:50 russell-- try root and 5up Jul 26 06:56:52 i'm sure there's a gpl tarball with a shadow file you could feed to a password cracker Jul 26 06:57:24 and you could back up over jtag Jul 26 06:57:48 maybe even from uboot Jul 26 06:58:36 5up -> "Login incorrect" Jul 26 07:03:00 meh Jul 26 07:03:28 and I've suggested this back in 2013 for your wdr3600 hehe Jul 26 07:05:40 just not that many people use stock fw with a serial console Jul 26 07:07:24 lol Jul 26 07:07:27 Devastator: Jul 26 07:07:30 2013-09-08 22:38 russell--: got an initramfs image working Jul 26 07:07:30 2013-09-08 22:38 russell--: using tftpboot from uboot prompt Jul 26 07:07:30 2013-09-08 23:04 russell--: grabbed copies of the flash, sysupgraded from initramfs Jul 26 07:08:16 irc logs -gt bad memory Jul 26 07:09:08 thanks for the reminder to go look Jul 26 07:09:42 problem solved Jul 26 07:25:33 Devastator: r46425 boots fine on the WD N750. Jul 26 07:25:38 anything beyond that is death ;) Jul 26 08:22:11 hmm, my openwrt-ar71xx-generic-archer-c7-v2-initramfs-kernel.bin is giving me an LZMA Error 1 Jul 26 08:22:14 ap135> bootm 0x80060000^M Jul 26 08:22:14 ## Booting image at 80060000 ... Uncompressing Kernel Image ... ERROR: LzmaDecode.c, 543 Jul 26 09:16:36 hauke r46495 trunk/package/kernel/linux/modules/other.mk * kernel: add kmod-lp again Jul 26 10:25:43 build #68 of netlogic is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/netlogic/builds/68 Jul 26 11:42:59 nbd r46496 trunk/include/image.mk * image: fix device variable exports for initramfs images Jul 26 11:50:30 nbd: ping? Jul 26 11:51:38 CRCinAU: pong Jul 26 11:59:35 nbd: WD N750 is borked with kerenl 4.1 :\ Jul 26 12:00:02 seems it all works up until r46425 Jul 26 12:00:14 after that, up until the latest revision doesn't boot. Jul 26 12:02:48 it seems r46426 is the switch to kernel 4.1 Jul 26 12:06:25 do you have serial console access? Jul 26 12:06:44 sadly not atm :\ Jul 26 12:06:52 but I think I'll be looking at that soon. Jul 26 12:09:29 I'm wondering if this needs a max232 :\ Jul 26 12:09:30 http://wiki.openwrt.org/toh/wd/n750 Jul 26 12:10:00 i'm not a big fan of max232 based stuff Jul 26 12:10:08 i tend to use usb<->ttl-serial adapters Jul 26 12:10:32 true, but I think I have a WRT54GS with a pre-made max232 thingo in it ;) Jul 26 12:10:32 usually cp2102 based Jul 26 12:10:37 ah Jul 26 12:10:38 ;) Jul 26 12:11:30 if I can actually find the good old beast Jul 26 12:14:22 I doubt any dmesg / logread from the working build helps? Jul 26 12:16:25 ooohhh - those CP2102 devices look nice. Jul 26 12:17:26 nbd: however, I'm not sure the kernel boots - as I never get link on the ethernet ports at the back Jul 26 12:17:36 and no flashing power LED as openwrt loads in the new build Jul 26 12:17:45 yeah, so i need to see the kernel crash Jul 26 12:18:05 it'd be nice to see those CP2102 things with a mini USB socket on it Jul 26 12:19:25 bought a 5 pack of these things for less than EUR 10 on ebay (just in case one or two go bad) Jul 26 12:19:44 so far all of them still work, and i've used them for more than a year now Jul 26 12:19:58 ahhh - like these: http://www.ebay.com.au/itm/1PCS-CP2102-Module-USB-Port-TTL-Communication-Module-For-Arduino-Adapter-/181801598679 Jul 26 12:21:00 many of them ship from hong kong though Jul 26 12:21:14 shipping mine took a few weeks Jul 26 12:21:28 yeah :\ Jul 26 12:21:55 while I've got you though..... 802.11r implementation in hostapd Jul 26 12:22:13 my inital thoughts is to do 802.11r between 2.4GHz & 5GHz bands. Jul 26 12:22:22 but there seems to be very little documentation on it :\ Jul 26 12:23:31 are you using wpa enterprise with a radius server? Jul 26 12:24:58 nah... just psk2 Jul 26 12:25:07 then 802.11r is useless for you Jul 26 12:25:12 o rly? Jul 26 12:25:57 I've been looking at the Aruba Networks 802.11k/r stuff in their controlled AP 'solutions' - it doesn't seem to need radius to work? Jul 26 12:26:04 unless I understand something wrong Jul 26 12:26:04 what 802.11r does is to reduce the assoc/auth during roaming to a 4-way handshake when using 802.1x Jul 26 12:26:26 and psk is already just a 4-way handshake Jul 26 12:26:29 so 802.11r does nothing there Jul 26 12:26:42 well then, that's just shot my understanding ;) Jul 26 12:26:52 I thought it helped with handoff / roaming too Jul 26 12:27:39 802.11k might help there Jul 26 12:27:58 but only if the client supports it Jul 26 12:28:16 and lemme guess, not supported in hostapd? ;) Jul 26 12:29:13 parts might be supported, not sure Jul 26 12:33:03 well, now that I know I've been wasting myself with 802.11r, I'll start looking for this mystical WRT54GS that has a max232 fitted Jul 26 12:34:49 bah - someone is sleeping in the room I think its in :\ Jul 26 12:34:55 might have to wait for another day Jul 26 12:40:24 anyhow - bed time.... Jul 26 12:40:27 thanks as always nbd Jul 26 13:02:37 nbd r46497 trunk/target/linux/ramips/dts/DIR-860L-B1.dts * ramips: swap radio calibration data pointers for DIR-860L Jul 26 13:03:07 nbd r46498 branches/chaos_calmer/tools/ patch/Makefile Makefile Jul 26 13:03:07 tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132) Jul 26 13:03:09 nbd r46499 branches/chaos_calmer/target/linux/ramips/dts/DIR-860L-B1.dts * ramips: swap radio calibration data pointers for DIR-860L Jul 26 14:01:28 build #66 of x86.kvm_guest is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/x86.kvm_guest/builds/66 Jul 26 14:04:24 build #68 of cobalt is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/68 Jul 26 14:07:45 build #68 of cns21xx is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/cns21xx/builds/68 Jul 26 14:11:18 build #68 of orion is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/68 Jul 26 15:52:10 hauke r46500 trunk/target/linux/bcm53xx/config-4.1 * bcm53xx: update config Jul 26 15:52:31 hauke r46501 trunk/target/linux/ generic/config-4.1 generic/config-3.18 generic/config-4.0 * kernel: add CONFIG_REGMAP_MMIO config option Jul 26 15:52:48 hauke r46502 trunk/package/kernel/gpio-button-hotplug/src/gpio-button-hotplug.c * gpio-button-hotplug: handle EPROBE_DEFER and other errors Jul 26 15:53:06 hauke r46503 trunk/target/linux/generic/config-4.1 * kernel: add missing CONFIG_ARM_CCI400_PMU config option Jul 26 15:53:31 hauke r46504 trunk/target/linux/bcm53xx/patches-4.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch * bcm53xx: update Disable MMU and Dcache during decompression Jul 26 15:54:16 hauke r46505 trunk/package/devel/oprofile/ patches/100-use_insmod_instead_of_modprobe.patch patches/100-musl.patch Makefile patches/110-fix_compile_error.patch * oprofile: update to 1.1.0-rc2 and make it work with musl Jul 26 18:15:35 updated openwrt/upstream, https://sdwalker.github.io/uscan/index.html Jul 26 18:52:33 build #68 of brcm63xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/68 Jul 26 18:55:52 build #68 of pxa is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/68 Jul 26 19:35:24 build #68 of brcm47xx.legacy is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx.legacy/builds/68 Jul 26 20:20:30 build #68 of brcm47xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/68 Jul 26 20:49:48 hi, I would like to ask about status of support EdgeRouterMax POE , as far as I know Blogic probably have this device, and was (?) working on this... Is he appear on IRC ? or should I rather use mailing list ? or ask somobody else ? Jul 26 21:24:25 build #68 of ramips.mt7628 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7628/builds/68 Jul 26 21:46:07 voyo: ERPoe-5 worksforme w/o poe control Jul 26 21:55:21 swalker: what about switch NIC interface ? Jul 26 21:56:00 Im unable to get it up. system detects eth0,eth1,eth2 . I guess instead eth2 should be switch0 ? Jul 26 23:10:32 build #69 of bcm53xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/bcm53xx/builds/69 Jul 27 01:39:54 build #68 of ramips.mt7621 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/68 Jul 27 01:42:50 build #68 of ppc40x is complete: Failure [failed shell_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/68 Jul 27 01:56:14 nbd: I've got the electronics guys here building up a max232 or equiv circuit for me this week. Jul 27 01:56:26 let me know if someone else gets the crash message to you before hand Jul 27 02:48:49 build #68 of lantiq is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/68 **** ENDING LOGGING AT Mon Jul 27 02:59:58 2015