**** BEGIN LOGGING AT Tue Apr 26 02:59:58 2016
Apr 26 03:10:52 <builder> build #263 of rb532 is complete: Failure [failed shell_18 compile_9]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/263
Apr 26 03:11:15 <builder> build #213 of octeon is complete: Failure [failed shell_18 compile_9]  Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/213
Apr 26 03:31:04 <builder> build #263 of ramips.mt7628 is complete: Failure [failed shell_17]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7628/builds/263
Apr 26 05:29:21 <builder> build #235 of ramips.mt7620 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7620/builds/235
Apr 26 06:20:32 <builder> build #288 of ramips.mt7621 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips.mt7621/builds/288
Apr 26 06:44:47 <builder> build #283 of realview is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/realview/builds/283
Apr 26 06:47:59 <builder> build #287 of ramips.rt3883 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips.rt3883/builds/287
Apr 26 06:48:48 <builder> build #213 of ep93xx is complete: Failure [failed shell_13]  Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/213
Apr 26 07:07:25 <builder> build #229 of at91 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/229
Apr 26 07:51:59 <OpenWrt-Commits> blogic 49229 branches/chaos_calmer/target/linux/lantiq/ dts/TDW8970.dts patches-3.18/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch base-files/etc/uci-defaults/01_leds lantiq: Fix ath9k LED for TDW8970.
Apr 26 07:52:00 <OpenWrt-Commits> blogic 49230 /branches/chaos_calmer/target/linux/lantiq/base-files/etc/diag.sh lantiq: Fix LED handling.
Apr 26 07:52:02 <OpenWrt-Commits> blogic 49231 /branches/chaos_calmer/target/linux/ar71xx/image/Makefile Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"
Apr 26 08:19:39 <builder> build #235 of xburst is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/235
Apr 26 09:22:51 <OpenWrt-Commits> rmilecki 49232 /trunk/target/linux/bcm53xx/patches-4.4/037-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch bcm53xx: backport BCM5301X DT patch specifying SPI controller
Apr 26 09:23:13 <OpenWrt-Commits> rmilecki 49233 trunk/target/linux/generic/patches-4.4/ 045-mtd-devices-m25p80-add-support-for-mmap-read-request.patch 080-spi-introduce-accelerated-read-support-for-spi-flash.patch 081-spi-bcm53xx-add-spi_flash_read-callback-for-MMIO-bas.patch kernel: backport support for accelerated SPI flash read
Apr 26 11:27:02 <builder> build #283 of oxnas is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/oxnas/builds/283
Apr 26 11:43:03 <OpenWrt-Commits> blogic 49234 trunk/target/linux/ramips/ (8 files in 7 dirs) ramips: add support for Planex CS-QR10
Apr 26 11:43:08 <OpenWrt-Commits> blogic 49235 trunk/target/linux/ramips/ (8 files in 7 dirs) ramips: add support for Planex MZK-EX300NP
Apr 26 11:43:12 <OpenWrt-Commits> blogic 49236 /trunk/package/boot/uboot-envtools/files/lantiq lantiq: uboot-envtools on BTHOMEHUBV3A
Apr 26 11:43:16 <OpenWrt-Commits> blogic 49237 /trunk/target/linux/lantiq/image/Makefile lantiq: new image build process - fix kernel entry address
Apr 26 11:43:19 <OpenWrt-Commits> blogic 49238 /trunk/target/linux/lantiq/image/Makefile lantiq: build sysupgrade images for lantiqImage
Apr 26 11:43:21 <OpenWrt-Commits> blogic 49239 /trunk/target/linux/lantiq/image/Makefile lantiq: remove orphaned tp-link image build steps
Apr 26 11:43:25 <OpenWrt-Commits> blogic 49240 /trunk/include/image.mk include: add a no dict version of lzma to new image build code
Apr 26 11:43:28 <OpenWrt-Commits> blogic 49241 /trunk/target/linux/lantiq/image/Makefile lantiq: use new image build process for brnImages
Apr 26 11:43:32 <OpenWrt-Commits> blogic 49242 /trunk/target/linux/lantiq/base-files/etc/diag.sh lantiq: Fix typo in LED diag script.
Apr 26 11:43:39 <OpenWrt-Commits> blogic 49243 trunk/target/linux/mediatek/ (105 files in 2 dirs) mediatek: update patches
Apr 26 11:43:43 <OpenWrt-Commits> blogic 49244 trunk/target/linux/ar71xx/ patches-4.1/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch patches-4.4/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch ar71xx: simplify patch 613 and add missing error handling
Apr 26 11:43:46 <OpenWrt-Commits> blogic 49245 /trunk/target/linux/ar71xx/image/Makefile ar71xx: Add TP-Link TL-WR740N v6 support to trunk
Apr 26 11:43:49 <OpenWrt-Commits> blogic 49246 /trunk/package/utils/usbutils/Makefile usbutils: Update USB IDs list and drop gzip compression
Apr 26 11:43:53 <OpenWrt-Commits> blogic 49247 trunk/target/linux/ramips/ (8 files in 7 dirs) ramips: Add support for the Netgear WNDR3700v5
Apr 26 11:43:57 <OpenWrt-Commits> blogic 49248 /trunk/target/linux/cns3xxx/patches-4.4/033-CNS3xxx-Fix-PCI-cns3xxx_write_config.patch cns3xxx: backport pci fix for cns3xxx_write_config
Apr 26 11:44:01 <OpenWrt-Commits> blogic 49249 /trunk/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch cns3xxx: set both MPS 'and' MRSS to 128
Apr 26 11:44:04 <OpenWrt-Commits> blogic 49250 /trunk/target/linux/lantiq/dts/BTHOMEHUBV3A.dts lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A
Apr 26 11:44:07 <OpenWrt-Commits> blogic 49251 /trunk/package/kernel/mac80211/patches/550-ath9k_add_ar9280_gpio_chip.patch mac80211: ath9k: add GPIO support for AR9280 chip
Apr 26 11:44:11 <OpenWrt-Commits> blogic 49252 trunk/package/network/services/dnsmasq/ Makefile files/dnsmasq.init dnsmasq: run as dedicated UID/GID
Apr 26 11:44:14 <OpenWrt-Commits> blogic 49253 /trunk/target/linux/lantiq/xway/profiles/bt.mk lantiq: install uboot-envtools by default on BTHOMEHUBV3A
Apr 26 11:44:17 <OpenWrt-Commits> blogic 49254 trunk/target/linux/lantiq/xway/profiles/ (7 files) lantiq: use dwc2 by default on all ar9 boards
Apr 26 11:44:23 <OpenWrt-Commits> blogic 49255 /trunk/target/linux/zynq/patches-4.4 zynq: Remove rdinit patch
Apr 26 11:44:27 <OpenWrt-Commits> blogic 49256 trunk/ target/linux/zynq/base-files/etc/board.d/02_network target/linux/zynq/image/Makefile target/linux/zynq/profiles/zed.mk package/boot/uboot-zynq/Makefile Zynq: Add Zedboard device support
Apr 26 11:44:30 <OpenWrt-Commits> blogic 49257 trunk/ target/linux/zynq/base-files/etc/board.d/02_network package/boot/uboot-zynq/Makefile target/linux/zynq/image/Makefile target/linux/zynq/profiles/zybo.mk zynq: Add Zybo device support
Apr 26 11:44:38 <OpenWrt-Commits> blogic 49258 trunk/target/linux/ar71xx/ (13 files in 8 dirs) ar71xx: Add support for the OMYlink OMY-G1
Apr 26 12:36:35 <OpenWrt-Commits> rmilecki 49259 /trunk/target/linux/bcm53xx/patches-4.4/405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch bcm53xx: support JEDEC incompatible w25q128 in spi-nor
Apr 26 13:39:02 <megal0maniac> On boot, on a kirkwood target (dockstar) I get "Creating 4 MTD partitions on "orion_nand"". The partitions are completely inconsistent with my u-boot env (I'm not doing the 2 stage thing), I've also changed it in the dtb file and tried using both the zImage and the uImage. Where is this config stored?
Apr 26 13:42:03 <megal0maniac> As a result I get a kernel panic because my rootfs is missing, because for some reason openwrt recreates my nand partitioning :/
Apr 26 13:43:01 <megal0maniac> And both the layout in the dtb, and mtdpart variable are being ignored
Apr 26 13:59:25 <megal0maniac> It appears to be baked into the kernel?
Apr 26 15:28:06 <builder> build #240 of brcm63xx.smp is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx.smp/builds/240
Apr 26 16:36:06 <rmilecki> megal0maniac: there should be a message what created there partitions
Apr 26 16:36:07 <rmilecki> what driver
Apr 26 16:36:17 <rmilecki> e.g.
Apr 26 16:36:18 <rmilecki> [    1.074077] 5 bcm47xxpart partitions found on MTD device spi32766.0
Apr 26 17:08:55 <OpenWrt-Commits> rmilecki 49260 trunk/target/linux/bcm53xx/ patches-4.4/820-spi-bcm53xx-let-DT-specify-SPI-device-s-instead-hard.patch config-4.4 patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch bcm53xx: switch to m25p80 and drop bcm53xxspiflash
Apr 26 19:45:15 <builder> build #285 of ramips is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/285
Apr 26 20:04:45 <builder> build #281 of lantiq is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/281
Apr 26 23:02:34 <builder> build #258 of netlogic is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/netlogic/builds/258
Apr 26 23:38:10 <builder> build #270 of malta is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/malta/builds/270
Apr 27 01:01:22 <builder> build #216 of mcs814x is complete: Failure [failed shell_18]  Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/216
Apr 27 02:42:30 <nyt> qos-scripts still broken for v6 :(
**** ENDING LOGGING AT Wed Apr 27 02:59:58 2016