**** BEGIN LOGGING AT Sun Oct 20 02:59:58 2019 **** BEGIN LOGGING AT Sun Oct 20 09:03:24 2019 Oct 20 09:35:43 morning Oct 20 09:36:28 win 30 Oct 20 09:36:30 grrr Oct 20 10:19:36 * check_data_file_clashes: Package odhcpd-ipv6only wants to install file /store-f/rah/proj/machines/ash/openwrt/build_dir/target-mips_24kc_musl/root-ar71xx/usr/sbin/odhcpd-update Oct 20 10:19:40 But that file is already provided by package * odhcpd Oct 20 10:19:42 * opkg_install_cmd: Cannot install package odhcpd-ipv6only. Oct 20 10:23:08 for some reason both odhcpd and odhcpd-ipv6only were enabled after doing a "make menuconfig" with Chaos Calmer config Oct 20 10:42:04 Will it be possible to backport this commit https://github.com/openwrt/openwrt/commit/51c094e7032b45522cc7060858196881e161e615 to OpenWrt 18.06? Oct 20 10:46:31 blogic: win 30? Oct 20 10:49:45 irc window Oct 20 10:49:52 missing a / Oct 20 11:04:15 it might be betting or poker as well :p Oct 20 11:11:55 The certificate for https://bugs.openwrt.org/ expired, could someone please renew it Oct 20 11:13:17 certbot hiccup? :p Oct 20 11:33:52 nobody testing those cert scripts? nobody even monitor certificates? no notifications? nothing? :D few lines script can do it and instead of that people already got bad habit to accept expired cert... shame! :D Oct 20 14:03:54 people see bug and issues and rant rather than provide context and fixes... shame! :D Oct 20 14:14:11 blogic, for now cant see bugs, certificate expired! :D Oct 20 14:14:46 ah the bugs page i though thte certs package Oct 20 14:15:31 :) Oct 20 14:22:46 there are no bugs Oct 20 14:33:38 morning' Oct 20 15:07:41 ldir only features Oct 20 16:31:46 and tomorrow the feature-tracker with a fresh cert will be available at https://features.openwrt.org/ ;) Oct 20 16:31:56 MY-R: I do test those scripts Oct 20 16:32:05 problem is that the letsencrypt crap does not work reliably Oct 20 16:32:06 jow: aloha Oct 20 16:35:41 or rather it only works once and later fails because acme.sh in conjunction with DNS validation and multipe domains does not work as expected because the txt record is incorrectly shared among them Oct 20 16:35:50 but I guess you don't really care, you just wanted to rant Oct 20 16:36:17 its just a few lines of scripts anyway Oct 20 16:37:18 jow, another reason to not use it and get something simpler BUT renew certs is one thing and check them to get notifications about their expiration date is another so can always avoid such a situations Oct 20 16:44:05 I think we found a volunteer Oct 20 16:44:36 jow: i was about to suggest the same Oct 20 16:44:51 Im not the one who got access to whole bunch of domains and their certs to just do simple check Oct 20 16:45:11 well, you could grab them via curl surely and then parse them to validate Oct 20 16:45:21 exactly! Oct 20 16:46:22 fixed update job is rolled out Oct 20 16:48:38 jow: thanks ! Oct 20 16:51:12 I am trying to port OpenWrt to the Ruckus ZoneFlex 7363 but I can't figure out how to enable any of the ethernet ports and no one on IRC has been able to help me. Should I make a forum thread or a WIP github PR or something? Oct 20 17:06:44 GrantM11235: what SoC is it ? Oct 20 17:07:41 AR7161 Oct 20 17:08:15 and what exactly are you seeng ? Oct 20 17:08:30 are the ports registered in the dts but dont pass traffic or what ? Oct 20 17:11:52 Here are the relevant parts of my bootlog https://bpaste.net/show/LS2MW Oct 20 17:12:22 I don't see anything in the log when I plug or unplug the ethernet cable Oct 20 17:13:10 GrantM11235: is there a switch on the pcb ? Oct 20 17:15:50 Here is my dts so far https://bpaste.net/show/C3RHO Oct 20 17:16:25 That port is connected to a Marvell 88E1116R PHY, there are two other ports that are connected to a Realtek RTL8363S switch Oct 20 17:17:21 you will need to bring up the drivers for the switches Oct 20 17:17:29 realteak normally uses the smi interface Oct 20 17:17:36 mrvl shuld work via mdio Oct 20 17:18:17 The phy address was based on trial and error. 0 and 1 look like they are for the switch, 3 through 5 said there was nothing at that address Oct 20 17:18:37 yeah but the driver needs to load Oct 20 17:23:46 So what am I missing for the realtek phy? Oct 20 17:25:49 target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi has that realtek switch Oct 20 17:29:56 That dts says it is a rtl8366s not a 63s, do they use the same driver? Oct 20 17:31:03 rtl8366s is a gigabit switch and it looks your device only has 100 MBIt/s so it is probablöy different Oct 20 17:31:57 Could it be a gigabit switch with 10/100 magnetics? Oct 20 17:44:34 I don't think my device uses the same gpio for i2c with the switch, but I'm not sure what pins it does use Oct 20 17:46:10 Here is the stock source code http://opensource.ruckuswireless.com/index.php?path=ZoneFlex%2FZoneFlex+7942%2F8.2.x.x/ Oct 20 17:51:23 I still can't figure out why the realtek phy doesn't Just Work(tm) Oct 20 18:03:13 When I set it to use one of the phys in switch it can at least see when I plug or unplug the cable in the corresponding port. With the realtek phy I can't even get that to work Oct 20 18:05:34 *phys in the switch Oct 20 18:09:23 The link is 10mbps half duplex, I'm not sure if that is because it is not fully configured or if it is because of my really crappy ethernet dongle Oct 20 18:11:20 It is also 10mbps half duplex in u-boot, so I am leaning towards blaming my dongle Oct 20 19:30:08 updated openwrt/upstream, https://sdwalker.github.io/uscan/index.html Oct 20 20:56:05 Pepe: I doubt it. That's...quite the change. **** ENDING LOGGING AT Mon Oct 21 02:59:58 2019