**** BEGIN LOGGING AT Wed Mar 04 02:59:57 2009
Mar 04 03:04:05 <KaraDog> got latest snapshot built. http://dashi-x02.karadog.net/~lihouyu/qtextended/4.4.3/snapshot/20090303/
Mar 04 03:04:23 <KaraDog> I will be happy to test patches...
Mar 04 03:06:12 <chouimat|Zzzz> KaraDog: which kernel? and which device?
Mar 04 03:07:23 <KaraDog> oops.. sorry! forget it. using the kernel here http://dashi-x02.karadog.net/~lihouyu/qtextended/4.4.3/snapshot
Mar 04 03:07:25 <KaraDog> for freerunner
Mar 04 03:10:06 <chouimat|Zzzz> k
Mar 04 03:10:17 <chouimat|Zzzz> what is the kernel? any patches
Mar 04 03:15:31 <KaraDog> the source is taken from http://qtextended.org/downloads/snapshots/. So no extra patches applied..
Mar 04 03:23:20 <ColdFyre> KaraDog:  i'm tempted to try that 4.4.3, how would you rate stability/functionality?
Mar 04 03:29:43 <chouimat|Zzzz> and the rootfs is based on?
Mar 04 03:34:07 <KaraDog> Now I am using snapshot 20090224. The most impressive problem is: after waking up from a whole night suspend. I am not able to make phone calls. The call went disconnected as soon as it's started. And the "echo" problem is still there..
Mar 04 03:35:13 <KaraDog> OK. I take the testing-fso-console-om-gta02.rootfs.tar.gz and testing-om-gta02-20090120.uImage.bin from http://downloads.openmoko.org/distro/testing/
Mar 04 03:36:48 <chouimat|Zzzz> k
Mar 04 03:37:13 <KaraDog> The build instruction is http://moko.mwester.net/qtextended.html
Mar 04 03:37:26 <chouimat|Zzzz> k
Mar 04 03:37:55 <KaraDog> ????????????what does "k" mean??
Mar 04 03:53:41 <ColdFyre> it means "ok"
Mar 04 03:54:40 <ColdFyre> hah, qtopia crashes and endlessly relods with that image
Mar 04 07:43:03 <FilipLinux4> morning
Mar 04 07:48:21 <jreznik> morning :)
Mar 04 07:48:22 <KaraDog> what's the time there?
Mar 04 07:48:28 <KaraDog> :)
Mar 04 07:49:37 <jreznik> KaraDog: 08:48 so usually it's morning for me but today I have lot of work so I'm in the office from about 7:30, not a time of day for software developer :D
Mar 04 07:54:08 <ljp> its 6 pm here
Mar 04 07:54:56 <KaraDog> it's 4 pm here
Mar 04 08:00:18 <ljp> haha I win!
Mar 04 08:01:32 <KaraDog> hehe, so you're in Australia?
Mar 04 08:09:34 <ljp> yep I am
Mar 04 08:09:42 <ljp> east coast
Mar 04 08:18:51 <GodArak> I am in china
Mar 04 08:18:56 <GodArak> east coast
Mar 04 08:18:59 <GodArak> :)
Mar 04 08:22:55 <ljp> theres a west coast in china?
**** BEGIN LOGGING AT Wed Mar 04 11:44:39 2009
Mar 04 12:50:39 <aj1911> has anyone configure qt with tslib support ???
Mar 04 13:00:17 <aj1911> :(
Mar 04 13:00:19 <aj1911> ???
Mar 04 13:02:19 <FilipLinux4> whichd device, which release of QtE ?
Mar 04 13:06:28 <aj1911> qtembedded 4.4.0
Mar 04 13:06:50 <aj1911> the touchscreen controller is UCB1400
Mar 04 13:07:54 <chouimat> morning
Mar 04 13:08:21 <FilipLinux4> QtExtended on neo uses tslib
Mar 04 13:08:44 <FilipLinux4> -extra-qt-embedded-config "-qt-mouse-tslib"
Mar 04 13:10:01 <aj1911> i have tried with qt-mouse-tslib but it wasn't a success
Mar 04 13:10:33 <aj1911> is -extra-qt-embedded-config necessary?
Mar 04 13:10:52 <aj1911> during configuration option ?
Mar 04 13:17:22 <Serdar> hmm I got an email, that qte is stopped now?
Mar 04 13:19:00 <aj1911> what is the reason?
Mar 04 13:21:46 <FilipLinux4> aj1911: not sure about qtembedded; I think extra-qt-embedded is needed for QtExtended 
Mar 04 13:22:45 <FilipLinux4> what do you mean with is was no success? compilation errors ?
Mar 04 13:23:30 <aj1911> no,compilation was success,appilcation is also running,but touch is not woring
Mar 04 13:23:36 <aj1911> working*
Mar 04 13:24:06 <aj1911> what is difference b/w exteneded & embedded ?
Mar 04 13:25:01 <FilipLinux4> hmm, try to set TSLIB_TSDEVICE=/dev/input/event1
Mar 04 13:25:06 <FilipLinux4> or whatever your device is
Mar 04 13:25:32 <FilipLinux4> and/or TSLIB_CONFFILE=/etc/ts.conf
Mar 04 13:26:17 <aj1911> i have also set environment variables.
Mar 04 13:26:19 <aj1911> export TSLIB_CALIBFILE=/etc/pointercal
Mar 04 13:26:19 <aj1911> export TSLIB_CONFFILE=/etc/ts.conf
Mar 04 13:26:19 <aj1911> export TSLIB_PLUGINDIR=/usr/share/ts/plugins
Mar 04 13:26:19 <aj1911> export TSLIB_FBDEVICE=/dev/fb0
Mar 04 13:26:19 <aj1911> export TSLIB_CONSOLEDEVICE=/dev/tty
Mar 04 13:26:20 <aj1911> export TSLIB_TSDEVICE=/dev/ts
Mar 04 13:26:29 <aj1911> is something missing ?
Mar 04 13:51:34 <aj1911> FilipLinux4 r u there ???
Mar 04 13:51:53 <aj1911> FilipLinux4: r u there?
Mar 04 13:52:42 <aj1911> can i get procedure for qt-extended?
Mar 04 14:02:10 <FilipLinux4> aj: QtE uses qbuild, not sure abot qtembedded
Mar 04 14:03:02 <FilipLinux4> ../qt-extended/configure -device neo -build-qt
Mar 04 14:03:02 <FilipLinux4> bin/qbuild
Mar 04 14:09:39 <aj1911> does that mean that tslib is inbuilt library in qt-exteneded ?
Mar 04 14:09:46 <aj1911> qt-extended*
Mar 04 14:14:24 <aj1911> i'm using PXA arm-xscale processor,does qt-extenede support it ?
Mar 04 14:22:55 <FilipLinux4> aj1911: not sure, I think ljp must now
Mar 04 14:25:15 <aj1911> ok.thanks for info.
Mar 04 14:26:07 <aj1911> FilipLinux4:what does bin/qbuild means?
Mar 04 14:28:33 <aj1911> ljp:r u there ?
Mar 04 14:30:23 <FilipLinux4> qbuild is the build system used by QtExtended. 
Mar 04 14:31:29 <aj1911> FilipLinux4:iis this to be build seperately?
Mar 04 14:31:51 <aj1911> i mean after configure?
Mar 04 14:32:37 <tsdogs> aj1911: -qt-mouse-tslib is the correct option
Mar 04 14:32:56 <tsdogs> though configuration makes some tests and if it cannot build the test it will disable it
Mar 04 14:33:12 <tsdogs> you should check the results of the configure and be sure that tslib is found
Mar 04 14:33:24 <tsdogs> btw: tslib must be already built
Mar 04 14:34:17 <aj1911> tsdogs:with -qt-mouse-tslib my qt is getting complied
Mar 04 14:34:33 <tsdogs> that's not what I'm saying
Mar 04 14:34:50 <aj1911> i'm able to run qt app but touch is not working 
Mar 04 14:34:57 <tsdogs> if you enable the switch it is not sure wether tslib support is in
Mar 04 14:35:25 <tsdogs> aj1911: what target are we talking about? ARM?
Mar 04 14:35:30 <FilipLinux4> ljp is in Australia, nighttime
Mar 04 14:35:37 <aj1911> yes ARM
Mar 04 14:36:01 <tsdogs> ok, then tslib is in the toolchain?
Mar 04 14:37:32 <tsdogs> there should be a target/config.test directory somewhere in the build of qt-e
Mar 04 14:38:02 <tsdogs> under unix/tslib there should be a tslib.o and a tslib executable
Mar 04 14:38:31 <tsdogs> if this is the case then tslib support is probably enabled, so you need to look elsewhere
Mar 04 14:38:55 <aj1911> i'm using arm-iwmmxt-linux toolchain,how to check for tslib in toolchain
Mar 04 14:39:46 <tsdogs> check if you have a libts.so somewhere in the toolchain
Mar 04 14:40:25 <tsdogs> or libts-1.0.so*
Mar 04 14:41:12 <tsdogs> also afair you need to set the QWS_MOUSE_PROTO environment
Mar 04 14:41:45 <aj1911> i have found tslib under unix/tslib
Mar 04 14:41:52 <tsdogs> something like export QWS_MOUSE_PROTO="tslib:/dev/input/touchscreen0"
Mar 04 14:41:58 <tsdogs> brb
Mar 04 14:42:42 <aj1911> also i cannot find libts.so
Mar 04 14:43:06 <aj1911> where it has to be get installed?
Mar 04 14:43:34 <tsdogs> either in the toolchain or somewhere it can be found (with some config options)
Mar 04 14:44:01 <tsdogs> if you run make inside the unix/tslib what does it happen
Mar 04 14:44:18 <tsdogs> ?
Mar 04 14:44:31 <tsdogs> ihmo it should complain about the missing tslib
Mar 04 14:44:35 <aj1911> w8 ofr 2min i'll find & get back to u
Mar 04 14:44:44 <tsdogs> ok
Mar 04 14:46:19 <aj1911> tsdogs:there is no makefile found in that directory, except tslib.cpp and tslib.pro
Mar 04 14:47:15 <tsdogs> check in the build directory inside config.tests
Mar 04 14:47:49 <tsdogs> are u shadow building qt?
Mar 04 14:49:25 <aj1911> shadow build?
Mar 04 14:49:40 <tsdogs> building qt outside the source directory
Mar 04 14:49:54 <aj1911> no
Mar 04 14:52:25 <tsdogs> hmm, then no makefile means the -qt-mouse-tslib is not even checked
Mar 04 14:52:33 <aj1911> tsdogs:i'm building source inside qt directory,& i'm cross-compiling the application & porting in arm board
Mar 04 14:52:57 <tsdogs> ok.
Mar 04 14:53:31 <tsdogs> you should check why the configure disables tslib
Mar 04 14:54:07 <aj1911> tsdogs:how can it be done?
Mar 04 14:54:08 <tsdogs> probably because it does not find tslib ... :)
Mar 04 14:54:18 <tsdogs> ./configure -qt-mouse-tslib
Mar 04 14:54:23 <tsdogs> and check the output
Mar 04 14:54:37 <tsdogs> maybe adding the -v can help too
Mar 04 14:54:49 <tsdogs> but first you need tslib :)
Mar 04 14:54:58 <tsdogs> where do you have it installed?
Mar 04 14:55:29 <tsdogs> tslib I mean
Mar 04 15:01:34 <aj1911> tsdogs:after ./configure -qt-mouse-tslib -v the output is : the tslib functionality is failed. you might need to modify the include & library serach path by editing QMAKE_INCDIR and WMAKE_LIBDIR
Mar 04 15:02:19 <aj1911> QMAKE_LIBDIR*
Mar 04 15:02:20 <tsdogs> yep, configure cannot find tslib (which is pretty normal as you don't seem to have it, at least in the toolchain :)
Mar 04 15:02:33 <tsdogs> where is libts.so arm available?
Mar 04 15:04:57 <aj1911> wait a sec..
Mar 04 15:05:53 <aj1911> is tslib should be part of toolchain?
Mar 04 15:06:47 <tsdogs> not necessarily but you must provide it somehow.
Mar 04 15:08:47 <tsdogs> you'll need to get the lib and the headers and place them where qt can find them (with QMAKE_INCDIR)
Mar 04 15:09:15 <tsdogs> it would be easyer to install it inside the toolchain. BTW what toolchain u using?
Mar 04 15:10:00 <aj1911> i found libts.so in usr/lib in target
Mar 04 15:10:25 <tsdogs> on the arm you mean?
Mar 04 15:10:47 <aj1911> the toolchain i am using is : arm-iwmmxt-linux-gueabi-gcc
Mar 04 15:11:04 <tsdogs> yeah, you already told me, sorry
Mar 04 15:11:19 <tsdogs> libts.so is on the target?
Mar 04 15:11:36 <aj1911> yes
Mar 04 15:12:25 <tsdogs> well if you have also the includes you could copy them over..
Mar 04 15:13:44 <tsdogs> building tslib would probably be best though
Mar 04 15:16:34 <aj1911> tsdogs:should have to copy libts.so to the host machines qt directory, qt4.4.1/lib/..?
Mar 04 15:17:19 <tsdogs> no in the toolchain lib directory is better imho, but you also need the includes and probablib the pkg-config file too
Mar 04 15:19:47 <tsdogs> which should be "where/toolchain/is/arm-iwmmxt-linux-gueabi/lib
Mar 04 15:19:59 <tsdogs> then the tslib.h in where/toolchain/is/arm-iwmmxt-linux-gueabi/include
Mar 04 15:20:32 <tsdogs> then tslib-1.0.pc in "where/toolchain/is/arm-iwmmxt-linux-gueabi/lib/pkgconfig"
Mar 04 15:21:13 <tsdogs> and create a few symlinks to libts.so (libts-1.0.so.0  libts-1.0.so.0.0.0)
Mar 04 15:23:09 <tsdogs> aj1911: probably building it would be best :)
Mar 04 15:23:45 <tsdogs> then install it somewhere like /usr/lib/arm/ and use QMAKE_INCDIR and QMAKE_LIBDIR to point to where headers and libs are
Mar 04 15:28:44 <aj1911> tsdogs: where I can find tslib.h.....?
Mar 04 15:29:28 <tsdogs> aj1911: in the source of tslib http://tslib.berlios.de/
Mar 04 15:35:50 <aj1911> tsdogs: we found tslib-0.0.pc instead of tslib-1.0.0.pc......will that work...?
Mar 04 15:36:27 <tsdogs> I think so but is should be adapted to the installation anyway.
Mar 04 15:36:51 <aj1911> tsdogs: we r not able to find pkgconfig in toolchain/lib/ directory.....
Mar 04 15:36:52 <tsdogs> that's why building tslib is probably faster.
Mar 04 15:37:13 <tsdogs> hmm, probably is missing then
Mar 04 15:37:27 <tsdogs> I mean pkgconfig
Mar 04 15:37:41 <tsdogs> so you need only the lib and the include
Mar 04 15:39:43 <aj1911> tsdogs:ok.....mean we need not worry abt pkgconfig........
Mar 04 15:39:53 <tsdogs> yep
Mar 04 15:40:29 <tsdogs> but I'm not sure qt detects tslib without pkgconfig
Mar 04 15:41:22 <tsdogs> you mght try running configure
Mar 04 15:44:15 <aj1911> tsdogs: configuring is going on...
Mar 04 15:47:51 <aj1911> tsdogs: after configure, what should be done to check tslib is included in the qt directory......?
Mar 04 15:50:22 <aj1911> tsdogs: configure got completed.......should we do gmake....(I think I will take more time)
Mar 04 15:53:09 <tsdogs> aj1911: in config.tests/unix/tslib
Mar 04 15:53:21 <tsdogs> check if there is a tslib.o and a tslib exec
Mar 04 15:53:57 <aj1911> tsdog: yes. we r having all these.....
Mar 04 15:53:57 <tsdogs> if they are there then tslib support has been enabled and you can proceed with gmake
Mar 04 15:54:23 <tsdogs> then go on and build qt-e, then the libQt should have tslib support builded in.
Mar 04 15:55:40 <tsdogs> if you have ldd on your target you could check if libQt* are linked with tslib.so
Mar 04 15:55:58 <tsdogs> afair it should be libQtGui.so
Mar 04 15:56:28 <tsdogs> another way is to rename libts.so to something else and see if it complains about it missing.
Mar 04 15:56:55 <tsdogs> Once you have that you can see if it works on target (imho QWS_MOUSE_PROTO should be set)
Mar 04 15:57:44 <tsdogs> aj1911: BTW: what does "file config.tests/unix/tslib/tslib" give? ARM ELF ...
Mar 04 16:00:56 <aj1911> tsdog: ya..it gives....: ELF 32-bit LSB executable. ARM, version 1 (SYSV), for GNU/LINUX 2.6.14, dynamically linked(uses shared libs), for GNU?LINUX 2.6.14, not stripped
Mar 04 16:02:23 <tsdogs> ok, then everything should be ok. build all, install and test :)
Mar 04 16:04:21 <aj1911> tsdog: thanks for spending ur valuable time with us......gmake is going on.....is it possible to give ur email id(if at all anything goes wrong)...
Mar 04 16:07:26 <tsdogs> I'll be here for some time, and there wil be ljp later. as qt-e is qt also on #qt you can find help :)
Mar 04 16:08:47 <aj1911> tsdogs: ok...
Mar 05 01:23:55 <KaraDog> morning
Mar 05 01:25:14 <KaraDog> Any news about the new qtextended release?
**** ENDING LOGGING AT Thu Mar 05 02:59:56 2009