**** BEGIN LOGGING AT Fri Apr 01 02:59:58 2011 Apr 01 04:48:39 does anyone know how to access the user button on the beagleboard. I've tried code from http://wh1t3s.com/tag/beagleboard/ , http://mechomaniac.com/BeagleboardUserButton and http://blog.makezine.com/archive/2009/02/blinking-leds-with-the-beagle-board.html?CMP=OTC-0D6B48984890 without any luck. Also don't have a gpio7 in /sys/class/gpio Apr 01 16:49:05 ogra_: Does the arm team still care about usb-imagewriter? If so, it would be really nice if it were taught to use udisks instead of hal. Apr 01 18:08:43 fscking 280GB partition on usbhdd connected to pandaboard takes ages Apr 01 18:09:14 Heh. Try on a SDHC. Apr 01 18:16:00 give me 320GB sdhc Apr 01 18:16:50 They make 32G now. Apr 01 18:17:01 64GB ones too iirc Apr 01 18:17:09 And why aren't you using your desktop to fsck? Apr 01 18:17:12 expensive like hell but they are Apr 01 18:17:29 GrueMaster: it would take probably even more time Apr 01 18:17:40 this hdd is not easily reachable Apr 01 18:17:45 Ah. Apr 01 18:17:48 Remote? Apr 01 18:18:01 in reach of hand Apr 01 18:18:55 Then why more time? Unplug from panda, plug into desktop/laptop. Apr 01 18:19:10 Filesystem is cpu agnostic. Apr 01 18:20:08 hdd is under movable monitor stand which has few shelfs on which lot of things lays Apr 01 18:20:26 and usb cable is not nice placed too Apr 01 18:20:35 anyway 66% of phase1 now Apr 01 18:22:01 Ah. Apr 01 18:22:11 My desk looks like a snake pit. Apr 01 18:22:24 my desk is too cluttered Apr 01 18:22:27 as usual Apr 01 18:23:52 5 LCD monitors, 12 systems, 2 KVM switch boxes, 1 HDMI switch 1 USB switch 3 keyboads/mice, and lots-o-schtuff. Apr 01 18:26:34 lot Apr 02 00:02:13 rsalveti: Where is the edid data on panda? Is it not in the driver anymore, or has it not been ported yet? Apr 02 00:08:39 GrueMaster: didn't check if it's being exported the same way as before Apr 02 00:08:48 let me check Apr 02 00:09:08 I'm not seeing it in /sys Apr 02 00:12:58 Ewww. This is ugly. http://paste.ubuntu.com/588444/ Apr 02 00:13:10 System hung at that point. Apr 02 00:13:56 GrueMaster: at panda-kubuntu-mobile.jpg, does it shows the xserver only when you move the mouse? Apr 02 00:15:09 The screen had blanked while doing the user-interactive portion of oem-config. I hit -F1 and -F7 to get back. Mose was visible, nothing else until I started moving the mouse. Apr 02 00:15:15 *Mouse Apr 02 00:15:25 hm, ok Apr 02 00:15:57 that could be issues with the fb or dss driver Apr 02 00:16:02 or even the hdmi one Apr 02 00:16:03 The syslog I just posted was from our netbook image. Apr 02 00:16:22 GrueMaster: can you try to reproduce with the dvi output? Apr 02 00:16:38 just need to use the same old parameters we were using when we only had dvi Apr 02 00:17:01 And there must be something out of sync on the FB. This is in /var/log/Xorg.0.log: Apr 02 00:17:01 [ 120.992] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument Apr 02 00:17:01 [ 673.685] (EE) FBDEV(0): FBIOPUT_VSCREENINFO: Invalid argument Apr 02 00:17:01 [ 673.685] Apr 02 00:17:01 Fatal server error: Apr 02 00:17:02 [ 673.685] EnterVT failed for screen 0 Apr 02 00:17:11 Will try it. Apr 02 00:20:27 GrueMaster: yup, edid is not being exported at our current driver Apr 02 00:20:32 should be an easy fix Apr 02 00:20:47 will change it here and see if it works Apr 02 00:21:00 dvi looks good so far, Apr 02 00:24:37 No errors with this mode. Apr 02 00:27:11 Oddly enough, I am also not seeing page faults. But I am running classic desktop atm, so could be other things. Apr 02 00:29:54 page fault is more related with the usb + eth usage Apr 02 00:30:26 I get those even when only using console and trying to transfer big chunks of data over ssh Apr 02 00:30:47 GrueMaster: so it seems the bug is at the hdmi driver and how it's handling the fb Apr 02 00:31:16 good to test with dvi because the logic is quite simple Apr 02 00:31:17 ok Apr 02 00:32:11 Is the dvi port capable of supporting the same modes as hdmi? I would rather have 1080p on my 24" lcd than 1280x1024. Apr 02 00:32:39 should be able, not sure if it's working atm Apr 02 00:34:13 if not probably a bug at the dss driver Apr 02 01:27:15 Can someone help me set my screen resolution right? All i get is "xrandr: Failed to get size of gamma for output default"... Apr 02 01:55:15 nicofs: What platform and what distro release? Apr 02 01:56:20 GrueMaster, Toshiba AC100 (nVidia Tegra), Xubuntu 10.10, kernel 2.6.29, modified... Apr 02 01:57:42 Hmm. I don't have one of those (yet). Have you tried on the #ac100 channel? (I think that's the right one). **** ENDING LOGGING AT Sat Apr 02 02:59:58 2011