**** BEGIN LOGGING AT Tue Apr 19 02:59:58 2011 Apr 19 08:31:33 anyone with a beagle xm around? Apr 19 08:31:46 i want to rule out a hw issue Apr 19 12:53:02 ogra_, what's the output of "alsaucm listcards"? Apr 19 12:53:52 ogra@panda:~$ alsaucm listcards Apr 19 12:53:52 Im setting defaults Apr 19 12:53:52 0: SDP4430 Apr 19 12:54:29 ogra_, that "Im settings defaults" is annoying. I'm sure that if we just correct "Im" to "I'm", sound will start to work ;-) Apr 19 12:54:59 what's the output of "alsaucm list SDP4430"? Apr 19 12:55:36 lol Apr 19 12:55:49 ogra@panda:~$ alsaucm list SDP4430 Apr 19 12:55:50 Im setting defaults Apr 19 12:55:50 alsaucm: error failed to get list SDP4430: No such file or directory Apr 19 12:57:51 ogra_, how about "alsaucm list _verbs" or "alsaucm list _enadevs"? Apr 19 12:59:22 http://paste.ubuntu.com/596013/ Apr 19 12:59:35 ogra@panda:~$ alsaucm list _enadevs Apr 19 12:59:35 Im setting defaults Apr 19 12:59:35 alsaucm: error failed to get list _enadevs: Invalid argument Apr 19 13:02:54 alsaucm set _verb HiFi Apr 19 13:03:16 ogra@panda:~$ alsaucm set _verb HiFi Apr 19 13:03:16 Im setting defaults Apr 19 13:03:49 pasuspender -- speaker-test -c 2 -t sine -D plughw:SDP4430 Apr 19 13:04:06 any sound? Apr 19 13:04:15 hmm, that needs me to be near the board and listen, right ? Apr 19 13:04:41 right Apr 19 13:04:46 * ogra_ is remotely logged into the board, i need to move over to the office, one moment Apr 19 13:04:59 i see it doing stuff on the cmdline though Apr 19 13:08:54 * ogra hugs diwic Apr 19 13:09:02 works ! Apr 19 13:09:09 ogra, great :-) Apr 19 13:09:21 so its the alsaucm set _verb HiFi we need ? Apr 19 13:09:37 let me reboot the board and see if it persists Apr 19 13:11:29 ogra, likely needs to be set on every boot - might persist a reboot but not a complete power-off with capacitors unloaded etc Apr 19 13:11:49 hmm, i will test that too Apr 19 13:12:07 it wouldnt be a prob to have a one time call of it in our first boot config tool Apr 19 13:12:21 putting it in place for every boot is more effort Apr 19 13:12:53 ogra, the point is that the PA UCM stuff should make it possible to set these verbs from PA. Apr 19 13:12:56 aha, after reboot the UI only has HDMI again Apr 19 13:14:25 hmm, no Apr 19 13:16:11 ogra, does the other verbs in the list make sense to you? Apr 19 13:16:23 voice low power etc Apr 19 13:17:48 yep. omap4/panda is a mobile development platform Apr 19 13:18:10 all the verbs make sense there Apr 19 13:18:33 i'm trying a reboot with "alsaucm set _verb HiFi" in rc.local, lets see what comes out there Apr 19 13:18:39 ogra, so question is if "HiFi" is the correct one to set at boot (if we should set anything at all at boot) Apr 19 13:18:46 seems pulse isnt picking it up without a restart Apr 19 13:19:08 we want to default to headphone on boot, so hifi is fine Apr 19 13:19:23 the prob is that people wanting to use HDMI sound will have to hack it up Apr 19 13:19:35 else we reset their sound every boot Apr 19 13:19:59 is HDMI going through the SDP4430 as well, or is it something separate? Apr 19 13:21:19 not sure, i think its going through the same chip Apr 19 13:22:08 aplay -l Apr 19 13:23:41 http://paste.ubuntu.com/596025/ Apr 19 13:24:55 ogra, looks like HDMI is on a separate sound card, probably not using UCM at all, and should not be affected by the "_verb HiFi" stuff Apr 19 13:25:43 k Apr 19 13:27:34 ok. adding the line to rc.local (and actually writing hifi with a capital F) gets me working sound OOTB Apr 19 13:28:32 diwic, so do you think its safe to pull in the pulse package with the patches ? i can care for addint an upstart script or some such that sets the default (or a udev rule) Apr 19 13:29:44 ogra, I'm not following, pull to where? The main ubuntu archive? Apr 19 13:31:11 diwic, well, the pulse packages with the TI patches werent uploaded yet Apr 19 13:31:31 and we only have two days left to do so Apr 19 13:32:21 ... getting sound to work this time is kind of important since we already failed with that last release Apr 19 13:32:49 ogra, a udev rule sounds like a good solution for setting the default verb Apr 19 13:32:58 k Apr 19 13:33:48 ogra, well, before we pull them in, we should get them working - do you think they are working? Apr 19 13:34:06 i got sound, thats enough imh ;) Apr 19 13:34:10 *imho Apr 19 13:34:19 with the rc.loacl entry at least Apr 19 13:34:32 ogra, yeah, but that does not need the PA patches Apr 19 13:34:51 alsaucm is at the alsa-lib level Apr 19 13:34:57 are you sure ? Apr 19 13:35:18 * ogra reverts to the archive pulse version, gimme a few min Apr 19 13:35:23 hmm, good question :-) Apr 19 13:36:23 gar Apr 19 13:36:36 now i rteinstalled pulse on my laptop :P Apr 19 13:37:38 grmbl Apr 19 13:37:47 * ogra whacks apt over the head Apr 19 13:37:59 oh, trying to downgrade PulseAudio? Apr 19 13:38:12 well, it has a ~ppa version Apr 19 13:38:17 apt should respect that Apr 19 13:39:32 sigh Apr 19 13:39:35 ogra, see your email, got it from Conor who had managed to downgrade pulseaudio after several rounds in the padded cell Apr 19 13:40:52 ogra, that's what he had to do - you should probably skip the modules you do not use Apr 19 13:40:58 grmbl, it complains about packages i dont even have installed Apr 19 13:41:48 bah, sigh, a version for every single package ? Apr 19 13:42:10 ogra, guess you could make a shell variable Apr 19 13:42:17 for the version number Apr 19 13:42:40 yeah Apr 19 13:44:27 k, that seems to work Apr 19 13:44:50 will take a while ... slow SD card Apr 19 13:45:33 diwic, in any case i think the pulse patches are important for UI exposure, you wont be able to select if you want HiFi or HDMI output without them Apr 19 13:45:55 but we'll see Apr 19 13:48:21 * ogra scratches head ... why the heck does pulse trigger update-initramfs ? Apr 19 13:56:07 diwic, ok, seems it works without the patches too Apr 19 13:56:27 ogra, how does it look in pulse now? One soundcard or two? Apr 19 13:56:33 the default selected output in the UI is HDMI though Apr 19 13:56:38 two cards Apr 19 13:56:46 great Apr 19 13:56:50 sound playing from headphone ... Apr 19 13:57:06 but if i open the UI it shows HDMI as the selected output device Apr 19 13:57:22 how are you playing the sound? Apr 19 13:57:24 if i switch back and forth and leave HDMI the default, sound is dead Apr 19 13:57:37 if i switch back to SDP its fine then Apr 19 13:57:52 i'm hitting back in the terminal to hear the kbd bell Apr 19 13:58:06 and i use the test speakers button in the UI Apr 19 13:58:11 ok Apr 19 13:58:24 i'll try banshee too later, but i dont think we'll have issues there Apr 19 13:58:53 a udev rule should live in alsa or pulse though Apr 19 13:59:15 (i can indeed add one as a hack but i would prefer not to) Apr 19 14:00:55 ogra, I wasn't exactly following what the "sound is dead" thing was Apr 19 14:01:46 by default the UI shows HDMI as selected output device Apr 19 14:01:52 while its using SDP Apr 19 14:02:23 if i switch the radio button to SDP and back to HDMI, sound on the headphone is dead Apr 19 14:02:25 hmm, that's strange, I'm assuming you haven't messed around with pavucontrol? Apr 19 14:02:30 nope Apr 19 14:02:52 its just showing a wronmg default on first start is what i meant to say Apr 19 14:03:03 banshee works fine Apr 19 14:03:04 ok, that would be my conclusion as well Apr 19 14:03:50 but I don't recognize that problem from anywhere else, seems strange Apr 19 14:04:03 well, a bug we can surely release with Apr 19 14:04:29 you might want to make sure recording is working as well Apr 19 14:05:08 that might need an additional verb...? Apr 19 14:05:47 hmm, the UI doesnt offer me *any* input devices Apr 19 14:06:14 i have mono and stereo outputs for SDP and a stereo output for HDMI Apr 19 14:06:38 could you tell me what physical inputs and outputs there are on this card? Apr 19 14:06:55 only a mic jack ... Apr 19 14:07:08 i'm not sure there are additional inputs on the expansion header though Apr 19 14:07:19 but getting the mic jack to work should be enough Apr 19 14:07:44 there seems to be a recod verb Apr 19 14:08:44 aha Apr 19 14:08:54 alsaucm set _verb Record Apr 19 14:09:02 that gets me duplex support in SDP Apr 19 14:09:07 ogra, question is if they are exclusive, so "HiFi" turns off record and vice versa Apr 19 14:09:27 they arent it seems i constantly listen to radio from banshee Apr 19 14:09:31 cool Apr 19 14:09:36 let me try a reboot and add it to rc.local Apr 19 14:10:15 * ogra reboots Apr 19 14:12:05 * ogra hears login sound Apr 19 14:14:46 hmm, record doesnt seem to use the mic Apr 19 14:17:41 how are you checking the mic? Apr 19 14:18:05 i have my headset plugged in ... checking the meter in sound prefs and testing sound recorder Apr 19 14:18:25 i have set it from record to Voice_Call now, lets see Apr 19 14:18:50 instead of Record Apr 19 14:18:58 still have a login sound it seems Apr 19 14:20:11 hmmk Apr 19 14:20:19 doesnt get my any input device at all Apr 19 14:20:52 It's interesting that the verb affects what devices show up in PA. Apr 19 14:22:53 well, no matter which one i set, i dont seem to be able to get input Apr 19 14:23:09 i would be willing to live without though, if we dont find a solution Apr 19 14:23:45 only Record actually gets me duplex support Apr 19 14:23:59 but it seems to not be routed to the mic jack Apr 19 14:24:08 or its muted on alsa level Apr 19 14:24:32 alsaucm should unmute the relevant things...but everything can be buggy of course Apr 19 14:24:39 yeah Apr 19 14:24:58 well, having playback at release is a massive improvement already Apr 19 14:25:32 is there any reason why alsaucm requires these ugly underscores ? Apr 19 14:26:06 ogra, No idea - I just figured them out by reading the source code... Apr 19 14:26:58 could you give me the output of arecord -l ? Apr 19 14:29:21 http://paste.ubuntu.com/596061/ Apr 19 14:32:01 ogra, hmm, from what you know about this board, would you suspect the mic jack is at "9 DMIC capture" or "11 Analog capture"? I'm suspecting 11 as the "D" in "DMIC" might suggest a digital mic is needed Apr 19 14:32:19 right, i would say that too Apr 19 14:33:10 was recording working with the init scripts we had in maverick? Apr 19 14:33:40 no Apr 19 14:33:54 ok Apr 19 14:33:59 and we never really had the full implementation in maverick Apr 19 14:34:11 only parts of it Apr 19 14:35:56 what is the output of "amixer -D hw:SDP4430"? Apr 19 14:38:31 http://paste.ubuntu.com/596064/ Apr 19 14:41:00 ogra, hrm, you'll almost need the datasheet of the SDP4430 for that to make sense...is that available? Apr 19 14:41:17 ndec, sebjan ^^^^ ? Apr 19 14:41:25 do we have one for the sound chip ? Apr 19 14:41:53 i know there are several papers but i'm not sure the sound is covered Apr 19 14:44:28 ogra, found something on google, claiming it's connected to a TWL6040 chip, is that correct? Apr 19 14:44:45 i think there was 6040 in one of the pastes Apr 19 14:45:24 http://paste.ubuntu.com/596025/ yep Apr 19 14:45:31 right that's on channel 11 as well Apr 19 14:46:59 the twl6040 has one "Analoc mic" and one "Headset mic". Can you verify which one you have connected your mic to? Apr 19 14:47:08 heh, not really Apr 19 14:47:19 there is nothing printed on the jack Apr 19 14:47:42 on the PCB it just says headphone Apr 19 14:48:00 which might or might not be the headset mic Apr 19 14:50:20 it seems to be the headset mic Apr 19 14:50:27 from looking at the schematics ;-) Apr 19 14:52:48 :) Apr 19 14:53:13 assuming you have the "record" verb fixed, could you try this command Apr 19 14:53:35 pasuspender -- arecord -D plughw:SDP4430 -f cd -d 10 Apr 19 14:53:42 sorry Apr 19 14:54:02 prints garbage Apr 19 14:54:36 pasuspender -- arecord -D plughw:SDP4430 -f cd -d 10 /tmp/test.wav Apr 19 14:54:48 and then speak into the mic for 10 seconds Apr 19 14:55:50 papplay only revels silence Apr 19 14:55:55 *reveals Apr 19 14:55:57 ok Apr 19 14:56:07 and i have overrun!!! (at least 16.473 ms long) Apr 19 14:56:12 twice Apr 19 14:56:23 hrm Apr 19 14:56:57 I think you should talk to TI about what verb you should use for recording from mic and then try my above command to record Apr 19 14:57:15 k Apr 19 14:57:17 My time is about up Apr 19 14:57:27 But at least we got some playback :-) Apr 19 14:57:31 well, can we add the udev rule to at least get HiFi in ? Apr 19 14:57:44 i guess that should go into alsa or pulse Apr 19 14:57:56 if so, alsa - not pulse Apr 19 14:58:01 right Apr 19 14:58:48 if you get the mic working on alsa level, we can consider the pulse stuff, but if it ain't working on the alsa level, it won't work on the additional pulse layer either. Apr 19 14:59:04 right Apr 19 14:59:14 good you called upon me for this, I thought it was all okay. Apr 19 14:59:37 i thought you had the bug on your radar Apr 19 14:59:49 but i somehow assumed the same for the TI devs Apr 19 15:00:06 i'm babbling on the bug since a while with my unsuccessfull findings Apr 19 15:00:18 but if you ask me, I'm happy for having a udev rule added Apr 19 15:00:43 such a rule should be trivial and non-invasive Apr 19 15:00:58 k, i'll try to come up with a one liner until tomorrow morning Apr 19 15:01:06 that should be enough to make the release Apr 19 15:01:14 given that hiFi is enough for now Apr 19 15:01:36 you can probably match against ATTRS{id}=="SDP4430" Apr 19 15:01:41 yeah Apr 19 15:02:31 yeah and see if you can get the mic working with the help of the TI folks Apr 19 15:02:34 ATTRS{id}=="SDP4430" IMPORT{program}="alsaucm set _verb HiFi" Apr 19 15:02:42 should that work ? Apr 19 15:02:48 ppisati: I saw your call earlier for a beaglexm, what's up? Apr 19 15:04:19 ogra, I would have tried this, but I'm not a udev expert: ATTRS{id}=="SDP4430", RUN+="alsaucm set _verb HiFi" ? Apr 19 15:04:31 ah, right, RUN Apr 19 15:04:58 IMPORT will hand over the return value to the caller Apr 19 15:05:42 ok, let's talk more tomorrow, gotta go. Apr 19 15:05:44 diwic, i think we'll keep recording for a possible SRU if i dont find a way to make it work tonight, should i attach the one liner to the bug ? Apr 19 15:06:11 ogra, yes and preferrably as a debdiff against the relevant package Apr 19 15:06:21 ok, will prepare everything Apr 19 15:06:46 ogra, and maybe poke TheMuso about it if he's awake when you are Apr 19 15:07:13 GrueMaster, something to test for you, add: ATTRS{id}=="SDP4430", RUN+="alsaucm set _verb HiFi" to /lib/udev/rules.d/60-persistent-alsa.rules before persistent_alsa_end and reboot, see (hear) if you have sound then on panda Apr 19 15:07:28 diwic, will, do, many many thanks for the help !!! Apr 19 15:07:45 ogra: Any other changes/packages to install first? Apr 19 15:07:56 GrueMaster, no ! thats the awesome bit :) Apr 19 15:08:17 we already have working sound since ages, UCM is just not initialized Apr 19 15:09:11 well, your panda should be up to date indeed :) Apr 19 15:23:02 Trying now on yesterday's image. Apr 19 15:24:04 did you try headless since beta btw ? Apr 19 15:24:37 * ogra_ hasnt and has a suspicion that the ppa stuff breaks jasper on headless Apr 19 15:25:45 ppa stuff? I haven't had a change as my pandas were doing Maverick -> Natty upgrade tests (not recommended on SD BTW). Apr 19 15:26:27 yeah, there was a fix to the ppa handling in jasper added after beta Apr 19 15:26:57 i think it might fail if the target dir doesnt exists (which it likely doesnt without any desktop packages) Apr 19 15:27:16 dont worry, i'll test myself tomorrow and fix if my suspicion is true Apr 19 15:30:18 No sound here. Apr 19 15:30:25 Panda 2.0 Apr 19 15:30:27 really ?!? Apr 19 15:30:39 Lower jack, right? Apr 19 15:30:45 yes Apr 19 15:31:04 do you see the SDP4430 in the sound prefs ? Apr 19 15:31:10 no Apr 19 15:31:15 sigh Apr 19 15:31:42 try calling: alsaucm set _verb HiFi Apr 19 15:31:52 from a terminal (close the sound prefs first) Apr 19 15:31:57 and killal pulseaudio Apr 19 15:32:03 then start the sound prefs again Apr 19 15:32:32 see if that changes it, probably udev initializes it to late Apr 19 15:33:51 if i add that line to rc.local here, it makes output work fine Apr 19 15:37:13 rebooting. Typo in udev rule. (oops). Apr 19 15:37:24 phew Apr 19 15:41:00 pulseaudio is crashing now. Need to look into it. Apr 19 15:41:05 hrm Apr 19 15:43:34 does alsaucm list _verbs get you a list of use cases ? Apr 19 15:43:59 (it should spit out 8 use cases) Apr 19 15:45:06 also alsaucm listcards Apr 19 15:45:13 whould list the SDP4430 Apr 19 15:45:21 *should Apr 19 15:48:43 * ogra_ doesnt get why it works flawless for him Apr 19 15:51:15 GrueMaster, oh, there was a kernel upgrade i havent installed yet, i wonder if something went wrong with the tree merge wrt alsa/ucm Apr 19 15:51:30 Do you have the pulseaudio from the ppa installed or the base image stuff? Apr 19 15:51:41 all archive Apr 19 15:54:10 * ogra_ fires off a dist-upgrade Apr 19 15:54:17 pulseaudio is crashing here with main.c: Daemon startup failed. Going to dive in and see why. Apr 19 15:54:33 What is your image based on? Beta2? Apr 19 15:54:35 well, what do you get from the alsaucm commands ? Apr 19 15:54:44 yes, its my peta2 test install Apr 19 15:54:44 alsaucm is fne. Apr 19 15:54:46 fine Apr 19 15:54:58 so you get the list and also get the soundcard listed ? Apr 19 15:55:01 (caffeine is building up) Apr 19 15:55:05 yes Apr 19 15:55:10 weird Apr 19 15:55:17 pulse shouldnt crash Apr 19 15:55:17 But pulseaudio is segfaulting. Apr 19 15:55:24 check syslog Apr 19 15:55:51 * ogra_ goes to get coffee before the call Apr 19 15:56:53 which call? Apr 19 15:57:07 Linaro? Apr 19 16:00:27 yep Apr 19 16:00:56 I'm skipping out. QA CoP meeting in :30 Apr 19 16:01:26 k Apr 19 16:14:28 ogra, might want to try pasuspender -- arecord -D plughw:SDP4430,11 -f cd -d 10 /tmp/test.wav Apr 19 16:14:36 as an option to the previous command Apr 19 16:14:58 will do (my mic is occupied by a meeting atm :) ) Apr 19 16:20:47 ogra: there are problems on panda with the input mic. prpplague might know more than me on that. Apr 19 16:21:54 ndec: the audio input is actually configured as a mono line-in currently Apr 19 16:21:54 ndec, ah, ok, should the Record usecase be the right one then ? Apr 19 16:22:13 you should be able to record using it as a line in Apr 19 16:27:57 ogra: Not seeing an issue with headless on omap4. Apr 19 16:28:06 k, thanks Apr 19 17:13:58 ogra: On my panda audio, I am seeing good indicators for asoc early in the dmesg log, but later on I am getting asoc: machine hw_params failed followed by a series of specific asoc failures. Apr 19 17:14:54 weird, i dont have such issues here Apr 19 17:15:28 the alsaucm call should definitely set up everything for you Apr 19 17:16:24 I even removed that line from udev. Still getting it. Not sure why. See http://members.dsl-only.net/~tdavis/syslog.gz Apr 19 17:17:37 your syslog looks fine Apr 19 17:17:48 I may have a theory. Let me check something. Apr 19 17:18:01 asoc: no valid backend routes for PCM: SDP4430 Media should actually go away if alsaucm was initialized Apr 19 17:18:18 i have that as well here until the card is properly initialized Apr 19 17:18:57 the others are not errors Apr 19 17:22:50 Do you still have /usr/share/alsa/init/omap4? Apr 19 17:22:57 no Apr 19 17:23:02 that was dropped from alsa Apr 19 17:23:09 do you ? Apr 19 17:23:14 Ok, because you said you were on the beta 2 image. Apr 19 17:23:14 it shouldnt be there Apr 19 17:23:26 It is in beta 2, not yesterday's image. Apr 19 17:23:34 upgarded to whatever was recent on monday Apr 19 17:23:54 and just upgrading again Apr 19 17:23:57 Check if the file is still on your system please. Upgrading doesn't delete it necessarily. Apr 19 17:24:19 it has to, else that would be a massive dpkg bug :) Apr 19 17:24:44 but for your convenience ... Apr 19 17:24:46 ogra@panda:~$ ls /usr/share/alsa/init/omap4 Apr 19 17:24:46 ls: cannot access /usr/share/alsa/init/omap4: No such file or directory Apr 19 17:28:04 lool, ping Apr 19 17:28:55 GrueMaster, did you recently upgrade the kernel on your panda ? Apr 19 17:30:01 I just did. This is yesterday's (20110418) image now rebooting with kernel & other updates. Apr 19 17:30:35 (forgot to run flash-kernel after updating). Apr 19 17:30:42 ?? Apr 19 17:30:48 the postinst runs that Apr 19 17:30:58 Yea, sure it does. Apr 19 17:31:05 (not on mine). Apr 19 17:31:12 UGH ! Apr 19 17:31:19 do we have a bug for that ? Apr 19 17:32:14 Kernel was released last night. I just upgraded and (5 minutes ago) saw that the new kernel was installed but not in the u-boot partition. Simple answer - NO. Give me some time. Apr 19 17:32:43 but flash-kernel ran fine when you executed it manually ? Apr 19 17:32:49 Ok, pulse is happy now with the new kernel. Apr 19 17:32:53 Yes it did. Apr 19 17:34:09 weird, i didnt have the new kernel here but it worked Apr 19 17:35:14 I was running 38-1207 when I was seeing the error, after manually running flash-kernel I am now on 38-1208 kernel. Apr 19 17:35:33 And audio is happy (so far - testing actual output next). Apr 19 17:36:32 works now. Apr 19 17:37:06 wohoo Apr 19 17:38:27 I'm starting over with yesterday's image to see if I can pinpoint the issues, especially with the kernel update. Apr 19 17:38:36 yeah Apr 19 17:38:41 (the joys of having two systems). Apr 19 17:39:15 i have seen an umount error in flash-kernel during my tests, thats why i brought it up Apr 19 17:39:21 doesnt happen anymore though Apr 19 17:40:00 i wonder if we should change umount to umount -l in the script Apr 19 17:40:22 not sure. Apr 19 17:40:43 Script is getting an overhaul though. May not be necessary. Apr 19 17:41:04 GrueMaster, btw, you are aware that we have an --update-bootloader function on flash-kernel ? Apr 19 17:41:23 * ogra_ remembers you saying something about bootloader updates Apr 19 17:41:48 That was either Karmic or Lucid on babbage. Apr 19 17:41:55 I could look up the bug if you like. Apr 19 17:42:10 ah, no, dont care :P Apr 19 17:42:18 Bug 365053 Apr 19 17:42:18 Launchpad bug 365053 in flash-kernel "On armel (Babbage platform), kernel image upgrading breaks if Ubiquity is instructed not to install a bootloader" [High,Triaged] https://launchpad.net/bugs/365053 Apr 19 17:42:23 (I had the list open) Apr 19 17:42:32 ah, that one Apr 19 17:42:38 ancient crap Apr 19 17:43:43 must have been karmic Apr 19 17:43:53 no babbge in lucid iirc Apr 19 17:44:01 yes there was. Apr 19 17:44:05 hrm Apr 19 17:44:14 right, we dropped it in maverick Apr 19 17:44:20 Babbage & dove. omap was an after-sprint bringup. Apr 19 17:44:53 yeah, "tech preview image" and totally unsupported :) Apr 19 17:45:38 Which reminds me, I had a notice in my inbox that ppsati was working on a Lucid omap bug. Can you tell hime to not care? Apr 19 17:45:59 Bug 588243 Apr 19 17:45:59 ppisati, stop caring ! Apr 19 17:46:00 Launchpad bug 588243 in linux-ti-omap "kernel BUG at /build/buildd/linux-ti-omap-2.6.33/drivers/video/omap2/dss/core.c:323! " [High,Confirmed] https://launchpad.net/bugs/588243 Apr 19 17:46:01 :) Apr 19 17:46:08 i saw the bugmail too Apr 19 17:51:37 I'm marking it as won't fix. Lucid was a demo release on omap anyways. I don't think we are on the hook for it, as it only supported Beagle C4. Apr 19 17:51:52 yeah Apr 19 17:51:59 good move Apr 19 18:07:31 ogra: on which package should we report bugs on the installer? Apr 19 18:08:01 depends, when does your issue occur ? Apr 19 18:09:21 everything after first reboot is ubiquity ... everything before first reboot is jasper Apr 19 18:09:55 ogra: ok. that answers it... i am just answering to someone on pandaboard ML,and wanted to ask to report bugs on LP... Apr 19 18:11:07 the jasper package is actually jasper-initramfs Apr 19 18:15:21 Yea for undecipherable ubiquity failures. My oem-config crashed hard for some reason. Probable a fs error, but no real indication. Apr 19 18:16:48 Ah there it is, two pages up in syslog: mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe00 Apr 19 18:16:52 grmbl. Apr 19 18:17:18 ogra: just fyi. http://groups.google.com/group/pandaboard/browse_thread/thread/aa46ddf46df2d946 Apr 19 18:19:26 ndec: That looks normal, but I have been seeing some odd SD failures lately. Not reproducable, just seemingly random. Apr 19 18:20:45 Usually flashing SD over a different image will cause this (i.e. if I had kubuntu on there previously). Apr 19 18:20:56 reflashing seems to clear it up. Apr 19 18:55:54 ogra_: "pong" Apr 19 18:58:25 jcrigby: ogra_: tested the u-boot fix on B5 and it's now working fine with all beagle revisions Apr 19 18:58:50 jcrigby: so I believe we should fix this asap, if still possible for natty Apr 19 18:59:10 ogra_: do you know if we can we still upload package fixes? Apr 19 19:09:07 rsalveti, if ogra_ could do the upload that would be great Apr 19 19:09:31 or we can ask some other person with upload rights Apr 19 19:10:50 ogra_: janimo: NCommander: anyone? ^ Apr 19 19:11:10 need someone to sponsor an u-boot update, that has a fix for beagle b5 Apr 19 19:14:28 rsalveti, link? Apr 19 19:14:59 I'll get around to it in the next few hours unless someone else grabs it Apr 19 19:15:08 bug 760350 Apr 19 19:15:08 Launchpad bug 760350 in u-boot-linaro "2011.03 doesn't boot anymore on Beagle B5" [High,In progress] https://launchpad.net/bugs/760350 Apr 19 19:15:15 code https://code.launchpad.net/~jcrigby/ubuntu/natty/u-boot-linaro/new- Apr 19 19:15:15 proposed-2011.04.2 Apr 19 19:15:27 jcrigby: is this the one to merge? Apr 19 19:16:11 so basically needs a merge to main u-boot tree in LP? Apr 19 19:16:17 then upload a package? Apr 19 19:16:44 https://code.launchpad.net/~jcrigby/ubuntu/natty/u-boot-linaro/new-proposed-2011.04.2 Apr 19 19:16:47 yes Apr 19 19:16:51 were there deps tested as well? Apr 19 19:17:03 jcrigby, debs I meant Apr 19 19:17:03 Gahhh. oem-config has crashed 5 times now on 3 different SD cards (different brands, sizes, & speeds). This is getting very frustrating. Apr 19 19:17:21 And it is only the netbook image that crashes. Apr 19 19:17:25 GrueMaster, core dumped? Apr 19 19:17:29 And not always. Apr 19 19:17:30 No Apr 19 19:17:43 rsalveti, its new-proposed, the old proposed was deleted Apr 19 19:17:46 janimo: yes, I tested the produced debs with my beagles and panda Apr 19 19:21:17 I wonder if this is causing the problem: ubiquity: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Apr 19 19:24:34 Hmmm. /var/log/Xorg.0.log.old: Segmentation fault at address 0x1be Apr 19 19:27:44 Beyond that, I am not seeing anything tangable. Apr 19 19:30:20 GrueMaster: is this with panda? Apr 19 19:30:27 yes. Apr 19 19:33:23 GrueMaster: do you know if you're always getting the seg fault at the xserver? Apr 19 19:33:36 or it breaks randomly? Apr 19 19:34:21 No. Sometimes I get SDIO errors. This was the first time I saw the sxerver segfault. I'm not sure where the issue is, as it is random. Apr 19 19:34:38 Watching oem-config run is like watching water boil. Apr 19 19:35:27 It would be nice if there was a log level that could be tweaked to show each stage in the log. Might be easier to track down that way. Apr 19 19:36:35 The symptom I am seeing is after oem-config takes user-input, it starts configuring things. Next time I glance over (5 monitors remember), it is back at the start of oem-config. Apr 19 19:37:44 GrueMaster: any error or warning at the kernel log for this time you got a crash at the xserver? Apr 19 19:37:53 Nope. Apr 19 19:38:03 At least not this last time. Apr 19 19:38:55 GrueMaster: which image are you testing? will try to run the installer with different sd cards to see if I can reproduce this problem Apr 19 19:39:54 Yesterdays (20110418). Apr 19 19:40:10 But I saw it (less frequent) with beta 2. Apr 19 19:41:39 ok, will give it a try Apr 19 19:41:59 urgh, 27kB/s Apr 19 19:46:46 Copying installation logs...and fail. Apr 19 19:47:17 So right around where it goes to uninstall. Apr 19 19:58:15 rsalveti: can't easily sponsor at the moment (GPG smartcard support is hosed on my machine), unless its an absolute priority Apr 19 20:24:58 rsalveti, if ogra is gone for the day and there is no one else that can merge/upload the uboot fix then slangasek can do it Apr 19 20:40:29 rsalveti: Trying yet again. This time with debug-oem-config. It usually just passes with this setting, but we'll see, Apr 19 20:40:59 jcrigby: sure, let's wait to see if janimo can help us, then we can ask slangasek later if needed Apr 19 20:41:11 GrueMaster: still downloading here... Apr 19 20:41:12 rsalveti, jcrigby I just came back Apr 19 20:41:12 ok, thanks Apr 19 20:41:16 I'll do the merge now Apr 19 20:41:25 janimo, great! thanks Apr 19 20:42:01 argh Apr 19 20:42:17 ssh key issue. Apr 19 20:42:51 I need to fix this now (I was hoping failing pushes to github were transitory, but apparently LP does not work either) Apr 19 20:46:12 phew, ssh-add and it works. No idea why the agent got confused Apr 19 20:49:22 anyone else having regulatory domain issues in 11.04 on pandaboard? Apr 19 20:49:26 Hmmm. It worked...sort of. With debug-oem-config, it gets to the same failure point (copying configuration logs) and restarts X, only this time it booted into unity-2d. Apr 19 20:50:46 no? Wifi works for everyone? Apr 19 20:51:20 oem-config is still installed (as is all of the other packages that it usually removes). the oem-config.log indicates errors with dbus setting up gconf. Apr 19 20:53:53 ubiquity-dm may have been the cause of the segfault. Not sure. /var/log/installer/dm is very vague, as is Xorg.0.log.old. Apr 19 20:54:16 And no filesystem errors or sdio errors. Apr 19 20:56:16 It may be related to Bug #758910 but I have no crash logs to determine with. Apr 19 20:56:17 Launchpad bug 758910 in ubiquity "oem-config-remove-gtk crashed with SIGSEGV in gdk_window_enable_synchronized_configure()" [Undecided,New] https://launchpad.net/bugs/758910 Apr 19 20:57:18 could be Apr 19 20:58:55 Hmmm. Looking at the changelog for the next release:* GTK frontend: Apr 19 20:58:55 - Avoid a crash if the automatic partitioning page is never displayed. Apr 19 21:01:10 All this time wasted just to try to reproduce an issue with the linux-image update not running flash kernel. What a PITA. Apr 19 21:04:01 That's what I thought. Been on this now for 6 hours straight. Apr 19 21:09:47 And my original mission has just been reproduced: updating kernel still does not run flash-kernel. Apr 19 21:21:01 merged, but having issues with packaging (after all these years) Apr 19 21:21:51 confused by u-boot-linaro having debian/ inside and having to create orig tarball by hand Apr 19 21:52:58 jcrigby, rsalveti package uploaded and waiting for approval Apr 19 22:09:46 janimo: awesome, thanks a lot Apr 19 22:10:14 rsalveti, you're welcom Apr 20 00:44:15 so, NCommander stepped in to help and see what the problem with the installer was. And it didn't fail. Nothing changed, I reflashed with the same image & same cmdline to the same SD card. Booted on the same panda. Apr 20 00:44:31 * GrueMaster is very frustrated. Apr 20 02:38:18 I'm having an issue booting 10.10 on a pandaboard, but the nightly build of 11.4 boots but isn't stable. Anyone have any ideas what might be going on? **** ENDING LOGGING AT Wed Apr 20 02:59:58 2011