**** BEGIN LOGGING AT Thu Aug 11 02:59:56 2011
Aug 11 11:39:59 <ogra_> E: config/chroot_local-hooks/preinstall-pool.sh failed (exit non-zero). You should check for errors.
Aug 11 11:40:28 <ogra_> infinity, ^^^ where do i find that ? searching for that script in either livecd-rootfs or live-build doesnt reveal anything
Aug 11 11:41:27 <ogra_> oh, got it, ignore me
Aug 11 11:41:45 * ogra_ didnt expect a here doc
Aug 11 11:49:30 <ogra_> hmm, i dont see why it failed and it doesnt spitinto the log
Aug 11 11:49:54 <ogra_> s/spitinto/spit out anything into/
Aug 11 12:31:27 <ogra_> cm'on publisher, spit out an ubuntu-meta for me
Aug 11 12:31:39 * ogra_ twiddles thumbs
Aug 11 13:52:24 <siji> hi all
Aug 11 13:53:12 <siji> am facing some prblm (may cose of less expertise) while trying to build kernel module
Aug 11 13:54:55 <siji> I have downloaded the kernel source from rep. by apt-get install linux-source
Aug 11 13:55:27 <siji> extracted and tried to build only touch screen module
Aug 11 13:55:57 <siji> by the command make modules SUBDIRS=drivers/input/touchscreen/
Aug 11 13:58:04 <siji> But it built only three modules, even more dirver files are there
Aug 11 13:58:10 <siji> Where am wrong ?
Aug 11 13:59:11 * ogra_ suggests to ask in #ubuntu-kernel
Aug 11 13:59:32 <siji> ogra_, ok
Aug 11 13:59:42 <siji> Hope they wont redirect me here again :)
Aug 11 13:59:51 <ogra_> heh, i doubt it
Aug 11 14:00:03 <siji> ;)
Aug 11 14:00:15 <ogra_> dou did configure it before, right ?
Aug 11 14:00:19 <siji> yes
Aug 11 14:06:06 <siji> ogra_, btw, i was not aware of that ubuntu is having this much IRC channels
Aug 11 14:06:24 <ogra_> every team has one usually
Aug 11 14:06:40 <ogra_> and then there is #ubuntu-devel,#ubuntu and #ubuntu-meeting
Aug 11 14:06:46 <siji> oh..
Aug 11 14:07:23 <siji> ya, it's very easy to get help , isntead of messing up everything in a single channel
Aug 11 14:07:28 <siji> *instead
Aug 11 14:08:06 <ogra_> we started out with #ubuntu-devel only ... but as the developer community grew it got to niosy
Aug 11 14:09:05 <siji> ok
Aug 11 14:10:39 <siji> so you people are having seperate team for each  ?
Aug 11 14:12:56 <ogra_> there is a desktop team, a kernel team etc etc
Aug 11 14:14:24 <siji> ok, so there might be a ubuntu-arm team too (assumes you are became part of it )
Aug 11 14:14:56 <ogra_> right
Aug 11 14:15:09 <siji> cool ..
Aug 11 14:18:41 <siji> ogra_, this is for you
Aug 11 14:18:43 <siji> <apw> siji, if you have ARM specific questions you may get quicker answers on #ubuntu-arm, the peeps who mostly have the h/w hang out there
Aug 11 14:18:44 <siji> :)
Aug 11 14:18:46 <siji> :)
Aug 11 15:45:36 <N3o> hello! Is there a problem with the repositories ? I get many Hash Sum mismatch after doing an apt-get update on a PandaBoard with natty
Aug 11 15:47:39 <N3o> this is my sources.list file and the errors I get: http://pastebin.com/NAEteeXh
Aug 11 15:49:54 <rsalveti> janimo: libvirt bug 823711
Aug 11 15:49:56 <ubot2> Launchpad bug 823711 in libvirt "libvirt version 0.9.2-4ubuntu8 failed to build on armel" [Undecided,New] https://launchpad.net/bugs/823711
Aug 11 15:51:16 <GrueMaster> N3o: There has been some issues with the pool for the last few days.  This may be some of the fallout.  Work is being done to clean it up.
Aug 11 15:51:34 <ogra_> rsalveti, yeahm, thats a weird one
Aug 11 15:51:43 * ogra_ comments
Aug 11 15:52:37 <janimo> rsalveti, yes, I'll look at that
Aug 11 15:54:55 <infinity> GrueMaster: Erm, there's been nothing that would cause hash sum mismatches.  Just archive skew.
Aug 11 15:55:17 <ogra_> infinity, well, look at the cdimage buildlogs for today xubuntu builds
Aug 11 15:55:22 <ogra_> they expose the same
Aug 11 15:55:29 <infinity> N3o: The usual suspect for hash sum mismatch issues is either a slightly broken mirror, or having a proxy (often a transparent one) between you and the archive.
Aug 11 15:55:54 <infinity> ogra_: Yes, but this is natty he's using.
Aug 11 15:55:57 <rsalveti> GrueMaster: janimo: u-boot SPL is basically a replacement for x-loader
Aug 11 15:56:01 <ogra_> its the third time today i hear someone mentioning hash sum mistmatches with the archive
Aug 11 15:56:06 <rsalveti> u-boot will now generate u-boot.bin and MLO
Aug 11 15:56:34 <rsalveti> code reuse now, only one source package and the SPL can probably boot the kernel directly :-)
Aug 11 15:57:11 <rsalveti> and once we add the usb support at SPL, it'll behave like omap4boot
Aug 11 15:57:33 <GrueMaster> rsalveti: COOL!!!
Aug 11 15:57:35 <rsalveti> we'll see how it goes for our 11.08 release, if it goes well we can do a FFe for ubuntu
Aug 11 15:58:28 <ogra_> rsalveti, any reason to not go with the binary header for u-boo.bin instaed and get rid of MLO completely ?
Aug 11 15:59:17 <rsalveti> well, you can think of MLO as a minimal u-boot now
Aug 11 15:59:26 <rsalveti> being able to boot the kernel directly is like having u-boot
Aug 11 15:59:33 <ogra_> right, but we still need two files
Aug 11 15:59:33 <rsalveti> but without the fancy stuff, like cmdline and such
Aug 11 15:59:40 <janimo> rsalveti, worth mentioning what SPL is (or link) in the spec whiteboard :)
Aug 11 16:00:37 <rsalveti> janimo: sure, will add
Aug 11 16:00:39 <rsalveti> http://www.omappedia.org/wiki/U-boot_Upstreaming_Project
Aug 11 16:01:57 <N3o> Thanks GrueMaster && infinity -- I don't have any kind of proxy so it has to be those issues you were talking about
Aug 11 16:02:12 <N3o> I'll try again in a few days
Aug 11 16:02:34 <janimo> rsalveti, thanks, sounds good
Aug 11 16:02:44 <GrueMaster> N3o: Actually, I just rebooted into natty, and am updating now without error.  Try rerunning apt-get update.
Aug 11 16:02:51 <N3o> roger
Aug 11 16:03:32 <N3o> same :(
Aug 11 16:03:41 <N3o> maybe I should try some cleaning?
Aug 11 16:04:29 <GrueMaster> couldn't curt.
Aug 11 16:04:34 <GrueMaster> *hurt
Aug 11 16:04:40 <N3o> tried that too
Aug 11 16:04:43 <N3o> same thing
Aug 11 16:05:36 <N3o> could you check my sources.list http://pastebin.com/NAEteeXh and confirm it is ok?
Aug 11 16:06:10 <infinity> N3o: Are you sure you're not behind a transparent proxy at your ISP?  It's a pretty common thing that many/most people aren't aware of. :/
Aug 11 16:06:23 <N3o> nope, I'm 100% positive
Aug 11 16:07:25 <N3o> I'm wondering, does apt-get goes trough IPv4 or IPv6?
Aug 11 16:07:30 <infinity> Yes.
Aug 11 16:07:45 <infinity> Whichever route is lower cost.
Aug 11 16:07:56 <infinity> Well, this is assuming ports.u.c has an AAAA, I don't recall. :P
Aug 11 16:08:08 <GrueMaster> N3o: Your sources.list is identical to mine.
Aug 11 16:08:21 <N3o> thanks GrueMaster
Aug 11 16:11:32 <N3o> disabled IPv6 and trying again
Aug 11 16:13:23 <N3o> same :(
Aug 11 16:17:01 <N3o> tried with sudo apt-get update -o Acquire::BrokenProxy=true and sudo apt-get update -o Acquire::http::No-Cache=True --- same effect
Aug 11 16:21:20 <GrueMaster> Try commenting out the failing archives from your sources.list, rerun apt-get update, then uncomment and rerun again.
Aug 11 16:21:34 <N3o> ok
Aug 11 16:34:02 <ogra_> rsalveti, wrt x-loader, i was referring to http://www.omappedia.org/wiki/E-MMC_boot#You_can_boot_omap3630_without_x-loader ... which i think works on omap4 as well
Aug 11 16:34:22 <ogra_> that would save us from using MLO at all
Aug 11 16:35:54 <GrueMaster> Should work well from emmc...oh, wait.
Aug 11 16:38:03 <ogra_> GrueMaster, emmc isnt different from mmc (SD card)
Aug 11 16:38:09 <N3o> dayum
Aug 11 16:38:17 <LeCherLich> ogra_: i have a question about getting the newest ubuntu to work on the Beagleboard xM rev A. i went to #beagle first, but av500 redirected me here
Aug 11 16:38:27 <N3o> something is wrong ...
Aug 11 16:38:41 <N3o> still can't install things
Aug 11 16:38:43 <ogra_> LeCherLich, yes, i saw that
Aug 11 16:39:36 <LeCherLich> i always get to the point where linux is uncompressed, it says "Uncompressing Linux... done, booting the kernel." and a couple of seconds later it crashes and begins all over: "Texas Instruments X-Loader" ...
Aug 11 16:39:56 <ogra_> LeCherLich, the desktop images have no serial enabled by default, if you want a verbose serial boot i'd suggest the server image ... you can indeed change boot.scr on a desktop image to dump out stuff to serial if you know what you are doing
Aug 11 16:40:14 <LeCherLich> i used the headless arm image
Aug 11 16:40:24 <LeCherLich> following the instructions at https://wiki.ubuntu.com/ARM/OMAPHeadlessInstall
Aug 11 16:40:42 <LeCherLich> do i still have to change boot.scr?
Aug 11 16:40:43 <GrueMaster> LeCherLich: Which image did you download?  Natty?
Aug 11 16:40:56 <LeCherLich> GrueMaster: yes
Aug 11 16:42:54 <GrueMaster> LeCherLich: Which img.gz did you download?  omap or omap4?
Aug 11 16:43:08 <N3o> universe + multiverse not working...
Aug 11 16:43:25 <LeCherLich> GrueMaster: omap
Aug 11 16:44:38 <GrueMaster> Are you on a linux host?  Try "wget -O - http://cdimage.ubuntu.com/releases/11.04/release/MD5SUMS|fgrep ubuntu-11.04-preinstalled-headless-armel+omap.img.gz | md5sum -c -"
Aug 11 16:45:01 <GrueMaster> Verify your image is good.
Aug 11 16:45:54 <LeCherLich> GrueMaster: the checksum is 6913.......fffc (cant copy+paste, i use a linux host, but its not this one)
Aug 11 16:46:36 <LeCherLich> seems to be good, according to the MD5SUMS file in the release folder
Aug 11 16:47:09 <GrueMaster> ok
Aug 11 16:47:25 <GrueMaster> Try reflashing the SD.  How big is the SD you are using?
Aug 11 16:48:53 <LeCherLich> 4gig.. so i should just repeat the whole process of installing (zcat ... > /dev/sdb) ?
Aug 11 16:50:44 <GrueMaster> Try the gunzip |dd method.  I have seen issues with the zcat>/dev method.
Aug 11 16:51:50 <LeCherLich> oh sorry i just looked at the history... i used the gunzip method already.
Aug 11 16:52:05 <LeCherLich> so should i try zcat now?
Aug 11 16:53:28 <GrueMaster> I have not had issues with the gunzip method, and found it to be reliable.  I have had %60 success rate with zcat.  That doesn't sound like the issue though.
Aug 11 16:54:14 <GrueMaster> You had mentioned zcat, which I have seen issues with, which is why I went down that path.
Aug 11 16:54:42 <LeCherLich> sorry my mistake
Aug 11 16:55:01 <LeCherLich> is there any way to make ubuntu more talkative, via the kernel line maybe?
Aug 11 16:55:28 <GrueMaster> You may want to try a modified boot.scr on the 1st partition of the SD.  To modify it, you will need to strip the first 72 bytes of data from boot.scr.
Aug 11 16:55:53 <GrueMaster> dd if=boot.scr of=boot.script bs=1 skip=72
Aug 11 16:56:30 <GrueMaster> Then you can edit boot.script.  Remove "quiet" from the bootargs line.
Aug 11 16:57:14 <GrueMaster> Then you can rebuild the boot.scr with "mkimage -A arm -O linux -T script -C none -d boot.script boot.scr"
Aug 11 16:58:10 <GrueMaster> Make sure there is a "console=/dev/ttyO2,115200n8" on the bootargs.
Aug 11 16:59:41 <LeCherLich> there was only console=ttyO2,115... (without /dev).. is that right?
Aug 11 17:00:00 <GrueMaster> Ah, yes.  my bad.
Aug 11 17:01:42 <LeCherLich> oh okay, thanks, now it's more talkative...
Aug 11 17:03:33 <LeCherLich> it hangs at about 9 seconds. last messages: mmcblk0: p1 p2 <newline> hub 1-2:1.0: USB hub found <newline> hub 1-2:1.0: 5 ports detected ... <crash>
Aug 11 17:04:37 <LeCherLich> pretty much right after it detected the mmc card...
Aug 11 17:04:52 <LeCherLich> could it be that there is a hardware problem with this card?
Aug 11 17:07:04 <LeCherLich> GrueMaster: anyways thank you very much, i will try to solve the problem tonight on my own, i may return later
Aug 11 17:13:40 <GrueMaster> ok, sorry I couldn't help more.  Maybe try adding "earlyprintk=/dev/ttyO2,115288n8" to your cmdline and see what that produces.
Aug 11 22:08:20 <ZiNC> Hey.
**** ENDING LOGGING AT Fri Aug 12 02:59:59 2011