**** BEGIN LOGGING AT Fri Jun 29 02:59:58 2012
Jun 29 09:42:21 <ogra_> janimo, just FYI, kernel and driver work fine together for me here ... on precise i dont even need console=tty1
Jun 29 09:44:46 <lilstevie> ogra_: which kernel is that
Jun 29 09:44:58 <lilstevie> I am assuming you mean for the ac100
Jun 29 09:45:04 <ogra_> quantal ac100 archive kernel
Jun 29 09:45:06 <ogra_> 3.1
Jun 29 09:48:16 <lilstevie> ah
Jun 29 09:48:28 <lilstevie> do you still have the plymouth issue?
Jun 29 09:50:24 <ogra_> yes, likely bug 1018907
Jun 29 09:50:26 <ubot2> Launchpad bug 1018907 in plymouth "plymouth in quantal on arm does only boot with black screen" [High,New] https://launchpad.net/bugs/1018907
Jun 29 09:50:29 <ogra_> or something close to it
Jun 29 09:51:21 <lilstevie> hm
Jun 29 09:53:22 <lilstevie> and that also solved the tegra problem we have with precise
Jun 29 11:09:22 <janimo> ogra_, so quantal is still likely to not boot or just has black splashscreen?
Jun 29 11:09:45 <janimo> the latter is not showstopper and I can try out the dailies if it actually boots and works otherwise
Jun 29 11:21:23 <angs> I have ubuntu server (12.04) image on my beagleboard-xM. Is it possible to upgrade it to the ubuntu desktop?
Jun 29 11:26:07 <ogra_> janimo, i need to adjust the installer to nopt use bootimg.txt anymore since flash-kernel doesnt use that, before that change i doubt the images will work
Jun 29 11:26:13 <ogra_> (working on that today)
Jun 29 11:29:54 <janimo> ogra_, thanks!
Jun 29 11:30:35 <ppisati> angs: sudo apt-get install ubuntu-desktop
Jun 29 11:30:48 <ppisati> angs: so, what was the problem in the end?
Jun 29 11:32:30 <angs> ppisati: thank you. the desktop image does not work on my board, however the server image works fine, I still do not know what is the problem
Jun 29 11:40:51 <angs> when I type sudo -s, I get read only file system error http://paste.ubuntu.com/1065851/ how can I fix it?
Jun 29 11:50:50 <ogra_> that doesnt look like the first part of the installer ran at all, check the size of your partition, is it nearly as big as the SD ?
Jun 29 11:57:54 <angs> ogra_: http://paste.ubuntu.com/1065884/ shows warning for the read-only system for /etc/mtab. when I insert the sd card to my laptop, I also get an error that  "Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p2,
Jun 29 11:57:54 <angs>        missing codepage or helper program, or other error
Jun 29 11:57:54 <angs>        In some cases useful info is found in syslog - try
Jun 29 11:57:54 <angs>        dmesg | tail  or so"   this is dmesg | tail http://paste.ubuntu.com/1065890/
Jun 29 11:58:58 * ogra_ would suggest you start over, that looks like you removed the card during the resize (which runs before the installer)
Jun 29 11:59:00 <angs> does it mean that image loading was unsuccessful?
Jun 29 12:02:34 <angs> hmmm weird. I ejected the sd card from my laptop after the loading process was finished and I just ejected from the board after the installation finished. I will load it again
Jun 29 12:04:09 <angs> btw, on the server image instruction it uses "dd bs=1M" however desktop image instruction says "dd bs=4M". what block size is correct?
Jun 29 12:56:43 <angs> I installed the server image again, so it works fine now. there is no error. I cannot install ubuntu-desktop by  " apt-get install ubuntu-desktop" command http://paste.ubuntu.com/1065954/   however I installed ssh package and it works fine. do I need to write a different package name for the ubuntu desktop?
Jun 29 13:17:02 <angs> I am also having a problem with apt-get update http://paste.ubuntu.com/1065975/ is it normal?
Jun 29 13:20:19 <RoyK> angs: try resolving ports.ubuntu.com manually: host ports.ubuntu.com
Jun 29 13:22:25 <angs> host ports.ubuntu.com  >> ;; connection timed out; no servers could be reached
Jun 29 13:22:48 <angs> sources.list  is here  http://paste.ubuntu.com/1066003/
Jun 29 13:22:58 <angs> do I need to edit something there?
Jun 29 13:23:30 <RoyK> angs: then you need to setup correct dns client settings
Jun 29 13:29:11 <angs> RoyK: it works fine now, thank you
Jun 29 13:29:24 <angs> I mean after correcting the dns setting
Jun 29 13:34:56 <RoyK> ok
Jun 29 19:00:44 <angs> I installed ubuntu-desktop package on ubuntu-server. I rebooted it but I do not get any output in the monitor. do I suppose to configure something to get the video output?
Jun 29 19:01:27 <angs> Also, lshw outputs [  870.848571] Unhandled fault: external abort on non-linefetch (0x1018) at 0xb6af5000                  Bus error (core dumped)
Jun 29 19:10:29 <angs> or is there any prebuilt ubuntu-desktop image for beagleboard-xm that I do not need to configure anything. Just plugging the SD card would be enough to use the ubuntu desktop?
Jun 29 19:43:29 <infinity> angs: http://cdimage.ubuntu.com/releases/12.04/release/
Jun 29 19:43:42 <infinity> angs: The omap3 desktop image should work, I would think.
Jun 29 19:43:49 <infinity> angs: I don't have an Xm to know for sure...
Jun 29 19:44:16 <infinity> Maybe I should break down and buy one to replace my ancient Beagle of doom.
Jun 29 20:41:46 <angs> infinity: thank you, I am able to use the desktop-image. my video cable was broken :S
Jun 29 20:43:10 <angs> when I log in to the GUI, I get a dialog box to report a system problem, I does not accept my user password. It says incorrect password, however I type the same password that I log in and sudo -s
**** ENDING LOGGING AT Sat Jun 30 02:59:58 2012