**** BEGIN LOGGING AT Wed Oct 10 02:59:58 2012 Oct 10 04:46:42 hello Oct 10 04:57:33 Hello everyone Oct 10 05:05:18 morning tmacgnolia Oct 10 05:05:26 Guys I followed your guide on the GNEX and something borked my Ubuntu, so I had to re install Ubuntu but I think it was my fualt Oct 10 05:06:01 Good morning, it is 24;05 here Oct 10 05:06:10 I'm porting the 1.0 on an arm device with the isis-project webkit as it's supposed to be with but still no luck with html5 video tag yet. Is there anybody enabled it? Oct 10 05:06:28 ~ugt Oct 10 05:06:29 it has been said that ugt is Universal Greeting Time. Created in #mipslinux, it is a rule that states that whenever somebody enters an IRC channel it is always morning, and it is always late when the person leaves. The local time of any other people in the channel, including the greeter, is irrelevant. http://www.total-knowledge.com/~ilya/mips/ugt.html Oct 10 05:06:43 jsea, if you see dkirker say something..snag him Oct 10 05:07:02 tmacgnolia, sorry to hear about the borking... Oct 10 05:07:03 I just tried to run with qt4's libraries compiled with gstreamer option but i just saw it makes another error Oct 10 05:07:17 Ok that sounds cool to me I will remember that Oct 10 05:07:20 ka6sox, thanks i'll wait for him Oct 10 05:07:42 jsea: Have you completely compiled it? I do not believe that the devices have the proper library versions. Oct 10 05:07:56 Not even the desktop build has it enabled. Oct 10 05:08:01 dkirker, oh you were there Oct 10 05:08:14 dkirker, which one do you mean? isis-browser's webkit? or qt4? Oct 10 05:08:24 isis-browser's Oct 10 05:08:57 ka6sox, I am at the point in the guide where it says To build the webos-image for the gnex device: Oct 10 05:09:33 Now I am working with the pyramid and not banana so do I not have to pull files from the device like in Android Oct 10 05:09:46 i was able to run html5 tags when I compiled isis-project for my desktop, but the same source doesn't work for my armv7 device Oct 10 05:10:09 i use exactly what from the official github isis-project Oct 10 05:11:54 I know I am way out of my league here but nothing ventured nothing gained Oct 10 05:12:18 now i failed with qt4 webkit so am about to try isis-browser again Oct 10 05:13:35 tmacgnolia, experimentation is good... Oct 10 05:13:55 only 53 tasks left in qemuarm build! Oct 10 05:15:11 I think I need more files cause I have very few files from the the steps I took in the guide. I will upload a screen shot and maybe one of you guys can tell me what else needs to be done Oct 10 05:15:21 Also do I need to insta OE? Oct 10 05:17:27 you are using what guide? Oct 10 05:19:54 http://webos-ports.org/wiki/Galaxy_Nexus_Build_Setup Oct 10 05:20:36 This is a paste bin of what i have in terminl from going through that set up. http://pastebin.com/2MtEfY0Y Oct 10 05:22:03 what processor is HTC Pyramid? Oct 10 05:22:46 Snappdragon uhmm what i will have to look I think it is a arm 6 Oct 10 05:23:00 tmacgnolia, sudo apt-get install build-essential Oct 10 05:23:24 you might also need to get gawk separately Oct 10 05:23:31 ka6sox, your nexus work looks awesome, is it supporting wifi app? Oct 10 05:23:58 ka6sox, as far as i know the wifi binary code isn't open yet so i should have written it myself Oct 10 05:24:31 Ok do I need to sudo apt-get install build-essential in my home folder? Oct 10 05:24:37 jsea: Right now I don't think that the video tag is supported yet. Oct 10 05:24:38 I am thinking yes Oct 10 05:25:24 And thanks ka6sox Oct 10 05:25:25 dkirker: ooops.. that shocks me ;) Oct 10 05:25:46 dkirker: that would mean the current isis-project's webkit doesn't support html5 tags, right? Oct 10 05:25:49 Let me look for the exact processor I have a terrible memory lol Oct 10 05:25:51 jsea, the control app is not written, however connman is working Oct 10 05:26:12 jsea: Some of them. Correct. I guess. Oct 10 05:26:19 I am looking into this. Oct 10 05:26:20 ka6sox: awesome job, i should take a look at it Oct 10 05:26:50 dkirker: this is what I spent about two weeks for.. haha.. Oct 10 05:27:22 jsea: I think it may be some outdated versions of gstreamer on the TouchPad. :( Oct 10 05:28:57 Umm sudo apt-get install build-essentials gives me a error Oct 10 05:29:07 dkirker : even the open webos github doesn't provide any of gstreamer libraries so I compiled them myself and I thought I have other stuff then only webkit that is compiled given proper 'video' options to get working with gstreamers Oct 10 05:29:16 E: Unable to locate package build-essentials Oct 10 05:29:33 build essential Oct 10 05:29:40 build-essential Oct 10 05:29:52 hhh.. I thought I'm ready to rock it.. ;; sad Oct 10 05:31:12 ok and the pyramid is a snapdragon S3 Oct 10 05:31:32 kk Oct 10 05:31:51 dkirker: then, can I ask you what I can do for enabling html5 video tag on the current open webos? Oct 10 05:32:10 build-essential worked, I typed too fast i guess Oct 10 05:33:02 I did need to do that in my home folder and not the build folder right Oct 10 05:33:23 jsea: Dunno. Haven't tried it yet. Oct 10 05:34:51 tmacgnolia, please add that to the http://webos-ports.org/wiki/Galaxy_Nexus_Build_Setup page Oct 10 05:36:09 dkirker : ok thanks man, anyway that was a huge hint for me Oct 10 05:36:39 jsea: Sure! I am expecting to drop some code on Thursday for ARM devices. Oct 10 05:36:54 Ok I will it needs to be close to the start correct? Oct 10 05:37:21 dkirker: cool, will wait for that! :p Oct 10 05:37:22 qemuarm build successful! Oct 10 05:37:29 yay Oct 10 05:38:07 morning Roy Oct 10 05:41:08 ka6sox I am looking for how to edit the page no luck so far Oct 10 05:41:14 Prepare for goodnight. I'm head out. Oct 10 05:41:25 Roy, nite Oct 10 05:42:16 tmacgnolia, do you have an account on the wiki? Oct 10 05:43:56 Yes and i am signed in Oct 10 05:45:18 When i click on the view source it says "The action you have requested is limited to users in one of the groups: Administrators, human." Oct 10 05:46:08 okay what is your username? Oct 10 05:46:18 T-Macgnolia Oct 10 05:47:00 promoted to human :D Oct 10 05:47:33 Thanks Oct 10 05:48:54 yw Oct 10 05:50:34 Ok before I save it this is correct right? Oct 10 05:50:51 I can't see it till you save it. Oct 10 05:51:18 $ sudo apt-get install build-essential Oct 10 05:51:21 $ cd into-your-build-directory Oct 10 05:51:35 $ mkdir webos-ports-env && cd webos-ports-env Oct 10 05:51:47 $ wget https://raw.github.com/webOS-ports/webos-ports-setup/master/Makefile Oct 10 05:52:01 $ make setup-webos-ports Oct 10 05:52:11 there might be more to add as you get further along but yes, save that Oct 10 05:52:34 does anyone else get suck at the calendar "welcome" page when booting the qemuarm image? Oct 10 05:52:48 Cool it is saved Oct 10 05:52:55 morning Oct 10 05:54:15 morning morphis Oct 10 05:56:42 dkirker: just popped up in my head, because the isis-project compiled for desktop runs html5 video tag so i guess it should work too when compiled for armv7.. how do you think? Oct 10 05:57:16 jsea: Well... Provided that the TouchPad has the proper gstreamer version. I am not sure if it does. Oct 10 05:58:13 Ok I have my work folder named WEBOS and inside it I have webos-ports-env and inside that I have these files and folders. http://i1259.photobucket.com/albums/ii554/T-Macgnolia/webos-ports-env_zpsf8ad3f4d.png Oct 10 06:01:13 woah Oct 10 06:01:23 its been awhile since i have seen ubuntu desktop Oct 10 06:01:31 commandline FTW Oct 10 06:04:36 tmacgnolia, if you follow the directions from a non-root terminal session it should work fine. Oct 10 06:04:55 build for the gnex first before attempting to modify your setup. Oct 10 06:05:11 you will need at least 120GB to work with for this. Oct 10 06:05:33 invalidopcode: yes, it's a known bug Oct 10 06:05:57 morphis: hm... anything I might be able to fix? Oct 10 06:06:30 invalidopcode: log in with ssh and Oct 10 06:06:31 touch /var/luna/preferences/ran-first-use Oct 10 06:06:37 Ok so I am good to go to move on to the last steps in the setup guide now then Oct 10 06:06:42 then it should work on next boot Oct 10 06:07:09 morphis: ah okay thanks! Oct 10 06:08:37 morphis: is a strange mouse offset also a known bug? Oct 10 06:09:10 invalidopcode: never tried the emulator so I can't tell :) Oct 10 06:09:22 oh haha okay :P Oct 10 06:09:47 eww.... the soft keyboard is ugly Oct 10 06:11:24 soft? Oct 10 06:11:45 the one that opens up when you go into just type Oct 10 06:11:53 oh, never used that Oct 10 06:12:04 haha your not missing much Oct 10 06:12:34 have you noticed a strange offset where the mouse doesn't click in the right spot in qemu? Oct 10 06:13:33 no, becuase I don't work with emulators (unless its the VHDL simulator) Oct 10 06:14:02 haha okay Oct 10 06:14:14 well I guess I might have to try this on real hardware then :P Oct 10 06:15:02 Hmm I am getting this Oct 10 06:15:05 [Errno 2] No such file or directory: '/home/tmacgnolia/WEBOS/webos-ports-env/webos-ports/meta-webos-ports/conf/layer.conf' Oct 10 06:15:26 I do not have the layer,conf file Oct 10 06:29:55 are you following the directions to the letter? Oct 10 06:32:54 Yes i jus went back through them again to make sure Oct 10 06:33:15 It is still giving me a error about not having layer.conf Oct 10 06:38:30 I got a layer.txt but no layer.conf Oct 10 06:45:40 Wait I think I see what is wrong but not sure why Oct 10 06:46:16 It is looking for '/home/tmacgnolia/WEBOS/webos-ports-env/webos-ports/meta-webos-ports/conf/layer.conf' Oct 10 06:46:39 But I have '/home/tmacgnolia/WEBOS/webos-ports-env/webos-ports/conf/layer.conf' Oct 10 06:46:58 I do not have the meta=webos-ports Oct 10 06:47:14 But I do not know why it is that way Oct 10 06:47:55 I think I am going to remove my WEBOS build folder and start over Oct 10 06:50:13 I do not think that the following two lines should be in the set-up guide. i think this is what caused my error Oct 10 06:50:16 # go one level up to the webos-ports-env dir Oct 10 06:50:26 $ cd .. Oct 10 06:51:26 This moved me back to the webos-ports-env folder to make the meta-webos-ports Oct 10 06:51:36 Am I wrong in thinking this Oct 10 06:57:59 Ok I was wrong in that assumption Oct 10 07:00:28 Ok I get this when I type in "make update" Oct 10 07:00:33 make[1]: Leaving directory `/home/tmacgnolia/WEBOS/webos-ports-env' Oct 10 07:00:33 env: gawk: No such file or directory Oct 10 07:00:48 make: Leaving directory `/home/tmacgnolia/WEBOS/webos-ports-env' Oct 10 07:10:32 tmacgnolia: maybe you should install gawk Oct 10 07:13:02 sudo apt-get install gawk right? Oct 10 07:14:57 that maybe correct, i don't have ubuntu environment Oct 10 07:15:43 It worked now I am rolling it looks like Oct 10 07:16:19 I was just about to try that before panda-z mentioned it, thanks panda-z Oct 10 07:16:41 tmacgnolia: yw Oct 10 07:17:19 Should I add the "sudo apt-get install gawk" command to the setup guide as well? Oct 10 07:18:14 I am recieving objects now Oct 10 07:18:53 sure Oct 10 07:47:02 Ok I am getting the "The BBPATH variable is not set" error but I did call . setup-env earlier Oct 10 07:47:46 Hei hei Oct 10 07:49:22 This is what my terminal directory line should look like right? "OE @webos ~/WEBOS/webos-ports-env $ " Oct 10 07:50:58 tmacgnolia: . ./setup-env Oct 10 07:51:20 in webos-ports subdirectory Oct 10 08:00:32 Ok Oct 10 08:03:28 I see now I was not in the right directory lol Oct 10 08:03:43 To many nights of no sleep Oct 10 08:04:48 Please install the following missing utilities: diffstat,makeinfo,chrpath Oct 10 08:05:06 Do I install these like I did gawk? Oct 10 08:06:20 tmacgnolia: yes, you can have a try Oct 10 08:08:48 Looks like that installed them Oct 10 08:11:34 Looking through the files i already see I will have to added pyramid files to WEBOS/webos-ports-env/webos-ports/meta-smartphone/meta-htc Oct 10 08:15:17 No I was wrong it did not install makeinfo. E: Unable to locate package makeinfo Oct 10 08:18:19 tmacgnolia: it's called texinfo in debian Oct 10 08:18:36 Ok I will try that Oct 10 08:19:54 Still same message. E: Unable to locate package makeinfo Oct 10 08:20:04 opps I mean textinfo Oct 10 08:21:32 Debian and Ubuntu are a lot alike though so I don't know has i said i am over my dang head anyway, but i am still gonna try no harm in that right lol Oct 10 08:21:46 textinfo != texinfo Oct 10 08:22:00 oh my bad Oct 10 08:23:02 That is it thanks JaMa Oct 10 08:24:12 Parsing recipes now Oct 10 08:38:52 It has been setting at NOTE: Preparing runqueue for a good little bit now is that normal Oct 10 08:50:43 tmacgnolia: I think it downloads stuff at that step, it can take a little while Oct 10 08:52:41 Ok I guess it is not like Android and it shows the progress as you sync Oct 10 09:47:23 Man I am still setting at the same thing in terminal NOTE: Preparing runqueue Oct 10 09:52:17 tmacgnolia: is it downloading something ? Oct 10 09:53:23 I have no idea it is just setting with a flashing cursor, I will take a screen shot Oct 10 09:55:36 tmacgnolia: most probably it is downloading sstate-cache Oct 10 09:56:40 It must be because mhy screen shot is taking forever to upload to photobucket Oct 10 09:57:55 tmacgnolia: anyway I'm in text mode here... Oct 10 09:58:31 Ok I will just keep watching it then and see how it goes Oct 10 11:25:46 Man something must not be right cause I am still setting at the same spot, is it really a 150 gigs? Oct 10 12:35:19 Oh I finally started seeing text again yay Oct 10 12:39:31 tmacgnolia, you still there? Oct 10 12:40:44 morning HaDAk Oct 10 12:41:27 good morning Oct 10 12:43:10 Zero, Dark :30 here... Oct 10 13:40:40 mmmm...coffee Oct 10 13:50:19 Sorry i am still here but i dozed off for a bit on the couch Oct 10 13:51:17 I am going to bed, my laptop is still compiking right now though I will update everyone when I get back up Oct 10 13:54:21 I think you can have a nice and long night... Oct 10 13:54:59 tmacgnolia, I hope you have a blackout mask.... Oct 10 13:55:13 Nite tmacgnolia Oct 10 14:36:51 http://www.androidenea.com/2009/06/android-boot-process-from-power-on.html Oct 10 14:37:02 relevant to what we are doing Oct 10 14:40:33 yes, you do boot the nexus in a weird way :) Oct 10 14:41:26 Tofe, would you expect less from contorting it to do our bidding? Oct 10 14:41:41 s/from/from us/ Oct 10 14:41:41 ka6sox meant: Tofe, would you expect less from us contorting it to do our bidding? Oct 10 14:42:20 No, I'm satisfied ! Oct 10 14:43:18 In a first step, for my a500 target try, I will simply boot off the sdcard, without any chroot Oct 10 14:44:28 nice! most phones don't give me that option sadly Oct 10 14:44:50 One question, when is the "postinstall" executed ? At first boot ? Because it tries to copy files off the android filesystem, so it must have access to it I guess Oct 10 14:47:49 it does have access to it... Oct 10 14:47:55 and it should only be done @ first boot Oct 10 14:48:15 oki Oct 10 14:48:58 So now I think I understand the overall tuna machine, finally :) Oct 10 15:01:52 bb much later Oct 10 15:15:02 Looks like 'Roy' is registered and was active recently. Oct 10 15:15:52 thats no fun Oct 10 15:16:19 you never registered that nick? Oct 10 15:47:37 GodGinrai: I never used it before. Oct 10 15:48:14 My other nick is registered. Oct 10 15:48:27 Sutton isn't registered :) Oct 10 15:49:47 you never used Roy before? I could've sworn I've seen someone around here using it Oct 10 16:05:30 Well, for the last two days. Oct 10 16:05:52 Apparently the real Roy doesn't mind people acting as him. Oct 10 16:06:29 haha Oct 10 16:09:48 i know a guy named Roy. his name is Rob Roy, and he drives a red corvette, and he owns this salon down the road. well, i don't really know him.. but his corvette is nice Oct 10 16:13:34 bbl, lunch Oct 10 16:25:06 gogogadget vm clone! Oct 10 18:04:49 how do I know the "SRCREV" for my linux git branch ? Oct 10 18:25:27 ok, I've got my zImages :) But not, which one should I use for the command "fastboot boot" ? the .bin, or the .bin.fastboot ? Oct 10 18:25:41 s/not/now/ Oct 10 18:25:41 Tofe meant: ok, I've got my zImages :) But now, which one should I use for the command "fastboot boot" ? the .bin, or the .bin.fastboot ? Oct 10 18:30:33 I did use .fastboot Oct 10 18:31:06 well, I don't have any initrd, so maybe it just doesn't matter Oct 10 18:35:46 eLinux.org says that using zImage is fine Oct 10 18:55:58 heyho Oct 10 18:56:00 Garfonso: you have some time tomorrow evening? Oct 10 18:56:08 ah sorry, friday evening? Oct 10 18:56:46 Stskeeps: I got everything except eglMakeCurrent working with a fake ANativeWindow implementation but now comes the buffering implementation Oct 10 18:56:51 morphis: cool Oct 10 18:56:53 Stskeeps: lets see how this works out Oct 10 18:56:56 morphis: good work :) Oct 10 18:57:17 Stskeeps: http://pastie.org/5031141 Oct 10 18:57:29 pure hacking, but it works :) Oct 10 18:58:23 \o/ Oct 10 18:58:31 can i see a debug output? Oct 10 18:58:57 Stskeeps: already closed the window Oct 10 18:59:03 aw Oct 10 18:59:03 :P Oct 10 18:59:06 friday evening I have some more time for this :) Oct 10 19:00:29 worked on it while I was on train today Oct 10 19:01:49 ka6sox-away: ^^ its moving forward Oct 10 19:02:01 morphis: good work, now i don't have to do that part :) Oct 10 19:02:10 :) Oct 10 19:02:27 but you can still help me with the buffering work :D Oct 10 19:03:13 or just reviewing my code and give me advises Oct 10 19:04:06 ah and really should start reading the egl specification :) Oct 10 19:04:16 also Oct 10 19:04:19 you're on ICS/JB righ Oct 10 19:04:19 t Oct 10 19:04:42 i believe those definitions have changed there Oct 10 19:16:51 Stskeeps: yes Oct 10 19:17:03 have to look into this Oct 10 19:17:07 but have to leave now Oct 10 19:18:33 cya Oct 10 20:12:01 if you didn't know about it yet, there is a new kernel for n900 in work. https://github.com/skry Oct 10 20:14:37 I wonder if there's a new kernel for the n800 Oct 10 20:14:48 though mine probably needs a new battery Oct 10 20:16:07 hm.. somehow my gnex won't boot open webos. what could I have done wrong? how can I debug? Oct 10 20:16:57 Garfonso: what are the symptoms? Oct 10 20:18:00 I do that fastboot command, then a Google logo appears on the device and that's it. Oct 10 20:18:10 from then on nothing happens, even after 30min. Oct 10 20:18:44 i just saw a tweet about HTC dumping their tablet business ... QUICK! TO THE FIRE SALE MOBILE! Oct 10 20:19:06 I had that issue when I first started devving… though in my case it was using a non-working image, and afaik there's no debugging console for the bootloader Oct 10 20:19:24 computer shows a connected usb network device (which is not giving me an IP via DHCP. Should I try to set one statically and connect the device?) Oct 10 20:19:53 hm.. I'm currently trying to rebuild the image from scratch Oct 10 20:20:06 thought that might be a good idea, but takes time. ;) Oct 10 20:21:12 EricBlade: HTC had a tablet business? Oct 10 20:22:46 fxg74: some people said that about HP about 14 months ago Oct 10 20:23:51 right, but the difference is the touchpad was at the top of the charts, BEFORE they axed it Oct 10 20:24:16 Garfonso: interesting, if it's showing up as a network device try assigning it the IP 192.168.7.1 and sshing in via root@192.168.7.2 Oct 10 20:24:43 Garfonso, see pm. Oct 10 20:25:47 i need something to write about.. what's new on the webOS front??? :) Oct 10 20:28:07 hope? Oct 10 20:28:31 neo Oct 10 20:28:52 http://www.youtube.com/watch?v=4zKXaIR2zVk&feature=youtu.be is new Oct 10 20:28:57 fxg74: does Neo run on phones? Oct 10 20:41:14 which parts of the webos-ports-env/ dir tree are shareable? as in, if I want to minimize re-downloading, which parts can I symlink / copy? Oct 10 20:44:14 for example, *.tgz in sstate-cache ? Oct 10 20:44:29 I'm pretty sure downloads/ is shareable Oct 10 20:46:34 yes downloads and sstate-cache Oct 10 20:46:50 linuxjacques: also all layers Oct 10 20:47:50 JaMa, thanks, what do you mean by layers? I'n not up on my OE terminology Oct 10 20:48:57 are those meta-* and openembedded-core ? Oct 10 20:49:35 linuxjacques: yes Oct 10 20:53:39 JaMa, thanks again. Oct 10 21:02:27 hmm, make setup-webos-ports works for me now Oct 10 21:02:30 it never did before Oct 10 21:03:05 what was the problem before? Oct 10 21:03:55 it said something like "no target for setup-webos-ports" Oct 10 21:04:04 so I was running the commands for that target manually Oct 10 21:04:38 I had that issue once, too. Oct 10 21:04:40 not sure, why. Oct 10 21:04:45 * JaMa knows Oct 10 21:04:56 :-) Oct 10 21:05:04 sorry that was my fault Oct 10 21:05:10 I'm glad *somebody* knows :-) Oct 10 21:05:34 but make update would be enouht to fix it Oct 10 21:05:39 no need to recreate env :) Oct 10 21:06:20 I'm starting a second build dir Oct 10 21:59:56 cool, it's going much faster with four threads Oct 10 22:11:58 hmm, it's compiling the kernel now but I only see one cc process, maybe I missed some config? Oct 10 22:13:10 * PatrickC can't wait to get to compiling! Oct 10 22:13:18 I have PARALLEL_MAKE = "-j 4" and BB_NUMBER_THREADS = "4" in conf/local.conf Oct 10 22:14:55 linuxjacques: you should see more processes while building kernel modules Oct 10 22:15:08 linuxjacques: some parts of kernel build are a bit serial Oct 10 22:15:29 JaMa, ah ok Oct 10 22:58:27 ERROR: Function failed: Fetcher failure for URL: 'http://download.gnome.org/sources/gtk+/2.24/gtk+-2.24.8.tar.bz2'. Unable to fetch URL from any source. :-( Oct 10 23:12:16 Hello everyone Oct 10 23:12:41 morning Oct 10 23:13:12 morning Oct 10 23:13:48 Thanks guys how is it going in here Oct 10 23:14:25 ah, that last looks like a proxy issue Oct 10 23:17:13 oh and BTW, if you edit the local.conf after you've already started the build, it doesn't pick up the changes :-) Oct 10 23:19:58 morning T-Macgnolia Oct 10 23:20:14 man.. updating to 12.04 is going to take a while :/ Oct 10 23:20:55 Aewsome I see from the log where I left my ;laptop running this morning that Tofe is working on a port for the A500, I have that device and had hoped to work o it if I got my pyramid going Oct 10 23:21:02 I just got my first "qmake-palm: No such file or directory" - didn't happen on last build (which was non-dev but that may be irrelevant) Oct 10 23:21:07 Hello ka^sox Oct 10 23:21:16 opps ka6sox Oct 10 23:21:35 I got the same error messagr Oct 10 23:23:07 Here is a patebin of mine http://pastebin.com/00aZK5zQ Oct 10 23:23:22 I'm trying the workaround from the wiki (for the "qmake-palm: No such file or directory" issue) Oct 10 23:24:15 though the wiki says MACHINE=tune instead of tuna Oct 10 23:24:31 you and me both linuxjacques Oct 10 23:24:37 i noticed that but it's still not working Oct 10 23:25:13 i just assumed it was because i was using opensuse so i didn't ask for help hehe Oct 10 23:25:20 moofree, did the "MACHINE=tuna bitbake -c compile -f qt4-webos" complete for you? and after that you still got the "qmake-palm: No such file or directory" error? Oct 10 23:25:26 Yeah I just tried that and it gives me another message i am going to see if I can figure it out Oct 10 23:25:39 yep qt4-webos completed Oct 10 23:25:55 ERROR: OE-core's config sanity checker detected a potential misconfiguration. Oct 10 23:25:56 I see qmake-palm at the top of 'top' so I must have it Oct 10 23:26:49 T-Macgnolia, if it says "Please set a valid MACHINE in your local.conf or environment" that might be because you did MACHINE=tune (like eh wiki says) instead of MACHINE=tuna Oct 10 23:27:58 You are exactly correct my friend, good catch, do you guys want me to change that in the wiki? Oct 10 23:28:22 I was seriously considering it ;-) Oct 10 23:28:34 let me find my pw Oct 10 23:28:39 also i have a couple of other thins I had to sudo apt-get to get it to build that are not in the wiki Oct 10 23:29:52 i ran the prereq script from build-webos before doing OE stuff on mine Oct 10 23:29:56 fiX0Red Oct 10 23:30:23 biab Oct 10 23:30:27 Ok lets see if that fixed it Oct 10 23:32:44 can you guys fix the wiki so its right? Oct 10 23:34:07 ka6sox do you think I will be able to just take the existing HTC filesand edit them to fit the pyramid or will I have to erite them from scratch Oct 10 23:34:29 I will add what i have and fix the misspelling Oct 10 23:35:07 fixed Oct 10 23:35:12 ka6sox-farfarawa, I changed tune => tuna on the wiki Oct 10 23:36:15 i am experiencing the same qmake error now :( Oct 10 23:36:22 the fix on the wiki didnt help Oct 10 23:36:27 * scoutcamper goes into debug mode Oct 10 23:37:32 scoutcamper, wow, you built QT that quickly? what are you running on? Oct 10 23:37:50 linuxjacques, i7 2600k+8gb ram Oct 10 23:37:59 mine's still chugging along Oct 10 23:38:21 scoutcamper, ah, 8 cores including HT ? Oct 10 23:38:25 yep Oct 10 23:38:33 I only have 2+2 :-( Oct 10 23:39:09 i spend money for a reason Oct 10 23:39:11 :) Oct 10 23:39:42 Well mine is still working now but it will probably be a will before I am done. I have a quad core with 4gig of ram Oct 10 23:42:03 my qt-webos build finished, re-starting the main build Oct 10 23:43:12 Ok you guys can laugh and make fun of me but what does that mean? my qt-webos build finished, re-starting the main build Oct 10 23:43:17 yeah, same error :-( Oct 10 23:44:06 T-Macgnolia, "MACHINE=tuna bitbake -c compile -f qt4-webos" had completed and I was doing "MACHINE=tuna bb webos-dev-image" again Oct 10 23:44:36 yep Oct 10 23:44:41 Ok I understand now Oct 10 23:45:11 okay what the hell Oct 10 23:45:26 ~/webos-ports-env/webos-ports/tmp-eglibc/work/tuna-webos-linux-gnueabi/qt4-webos-4.8.2.03-1.00-r20/qt-build-tuna/bin/qmake-palm Oct 10 23:45:27 exists Oct 10 23:48:01 it's looking for it under .../webos-ports-env/webos-ports/tmp-eglibc/sysroots/x86_64-linux/... Oct 10 23:48:05 this is condounding as hell Oct 10 23:48:37 i symlinked it to the propper place, and now i have a QMAKESPEC has not been set error Oct 10 23:48:56 yeah I see it in .../webos-ports-env/webos-ports/tmp-eglibc/work/tuna-webos-linux-gnueabi/qt4-webos-4.8.2.03-1.00-r20/qt-build-tuna/bin/qmake-palm Oct 10 23:49:22 are we all doing -dev image builds? Oct 10 23:49:33 I didn;t have this issue last time on a non-dev build Oct 10 23:49:55 im doing -dev builds Oct 10 23:50:34 I'm doing -dev this time Oct 10 23:51:01 non -dev throws the same error now Oct 10 23:51:05 ugh Oct 10 23:51:16 ah, interesting Oct 10 23:54:20 I gotta head home. I'll be on from there later. Oct 10 23:55:34 Non dev here Oct 10 23:56:23 morphis, ping? Oct 11 00:00:36 Why did I timeout Oct 11 00:04:02 at work now, yeah i tried copying over that qmake-palm file to the directory it expected earlier and got something different Oct 11 00:04:13 i'll try starting the -dev- build during lunch Oct 11 00:05:37 not like it matters since i don't have a nexus to try it on :P Oct 11 00:53:24 Alright the qt-webos build finished Oct 11 01:38:59 is there a way to have openwebos create a uImage instead of a zImage? Oct 11 01:40:35 OE is very flexible; it's probably just one line in a config file Oct 11 01:42:13 yeah that's what I figured... I was just wondering if anyone knew were that line might be :) Oct 11 01:44:59 my build laptop isn't booted at the moment Oct 11 01:45:09 ah okay Oct 11 01:52:31 invalidopcode, look in webos-ports-env/webos-ports/meta-smartphone/meta-samsung/conf/machine/tuna.conf Oct 11 01:52:44 KERNEL_IMAGETYPE = "zImage" Oct 11 01:53:06 lots of other phones have "uImage" Oct 11 01:53:15 hm... thanks jacques! Oct 11 01:53:38