**** BEGIN LOGGING AT Thu Dec 26 02:59:59 2013 Dec 26 03:04:01 Hi Dec 26 03:04:03 How to use flags in insane skip Dec 26 03:04:08 ? Dec 26 07:24:29 hi all i try to load g_serial module in at91sam9x5ek to connect my ubuntu pc through minicom,but it freezed with "initializing modem" message,but i given "getty 115200 /dev/ttyGS0" thn its working fine, there is already an entry in /etc/inittab for S0 S:2345:respawn:/sbin/getty 115200 ttyS0 but i altered for GS0 in the same file as S:2345:respawn:/sbin/getty 115200 ttySG0 but it does not work, can you please help me Dec 26 09:57:57 hi, my touchscreen is correctly reporting events using evtests, xinput_calibrator is returningsane values but I can't get the touchscreen to work in matchbox. any idea ? Dec 26 15:52:16 Does anyone know of a summary of the policy which states that a user needs to produce an sdk, not try to use the sysroots directly from outside the system? I know we have to explain it to people on a fairly regular basis Dec 26 17:02:05 Hello all Dec 26 17:06:55 I am getting this error while bitbaking the rpi basic image Dec 26 17:07:12 Any one let me what is going wrong Dec 26 17:08:28 RROR: Function failed: Unpack failure for URL: 'http://www.zlib.net/zlib-1.2.8.tar.xz' Dec 26 17:08:38 ERROR: Function failed: Unpack failure for URL: 'http://www.zlib.net/zlib-1.2.8.tar.xz' Dec 26 17:09:59 I tried changing the file extension to tar.gz but it didn't work too Dec 26 17:23:40 try with -v to get some more information Dec 26 17:24:17 sorry sce: didn't get you Dec 26 17:24:37 maybe you dont have the xz-utils Dec 26 17:24:54 http://askubuntu.com/questions/92328/how-do-i-uncompress-a-tarball-that-uses-xz Dec 26 17:27:01 ramose: good morning, sce might be correct, but we built it natively, check that you have the xz was built, it should be a binary in your tmp/sysroots/x86-64-linux/usr/bin Dec 26 17:28:35 Goog Morning, sgw_ but one point when I click on this link Dec 26 17:29:01 it showed me 404 Not Found Dec 26 17:29:55 sqw_ : is this link deprecated? Dec 26 17:30:01 ramose: you should not need that since the build system should build a native xz binary for your and use it, please check if xz is built Dec 26 17:30:10 which link ? Dec 26 17:31:27 sce: this link http://www.zlib.net/zlib-1.2.8.tar.xz Dec 26 17:31:51 ok sgw I am checking it Dec 26 17:31:54 ramose: does seem that the extension to .tar.gz, I really hate when upstream's just change things like that. Dec 26 17:32:23 ramose: what do you have in your downloads directory (DL_DIR) for zlib, did it find anything from the mirror? Dec 26 17:32:56 just one more update ,just now I made it run Dec 26 17:33:02 with .gz Dec 26 17:33:06 extention Dec 26 17:33:23 plz review the changed recipe Dec 26 17:33:26 ramose: looking at the www.zlib.net, it turns out they offer both .tar.xz and .tar.gz, not sure why we are getting the 404 Dec 26 17:34:31 ramose: just now the .tar.xz link worked correctly for me. Please try it again Dec 26 17:34:57 on my side its working Dec 26 17:35:30 ok Dec 26 17:35:32 http://tny.cz/177101ac Dec 26 17:36:01 meanwhile would you please review the changed recipe Dec 26 17:37:19 ramose: why change the LICENSE and LIC_FILES_CHKSUM lines, they should not need changing, but I think that you should leave it as it was originally, there might have been a short issue with their website. Dec 26 17:40:28 oh Thanks sgw: Thanks sce it is working with the older recipe now Dec 26 17:40:55 I don't know but it wa down yesterday also Dec 26 17:42:29 sqw_To your point "why change the LICENSE and LIC_FILES_CHKSUM lines" with older ckecksum i was getting some error ,so I replaced them with value suggested by bitbake environment Dec 26 17:42:46 ur welcome Dec 26 18:37:22 how much minimum hard disk space required to build Rpi basic image? Dec 26 18:41:58 I have 7gb of space lefft on my machine and its only 463 tasks done while building rpi basic image Dec 26 18:42:17 would this 7GB of space is enough **** ENDING LOGGING AT Fri Dec 27 02:59:58 2013