**** BEGIN LOGGING AT Sat Nov 29 02:59:59 2014 Nov 29 08:44:27 hi, what is the easiest way to debug sstate-cache issues? Nov 29 15:25:38 Hi all where I can find a giude to create a sd bootable for beaglebone black + yocto Nov 29 15:26:09 I looked for it but I didn't find anything Nov 29 15:28:28 manu: do you have the bsp layer? Nov 29 15:29:03 lpapp: I start to work with core-image-minimal Nov 29 15:31:06 lpapp: I follow more than guide to create sd but all my sd kernel fail on start Nov 29 15:33:06 with what exactly? Nov 29 15:33:41 Net: not set. Validating first E-fuse MAC Nov 29 15:33:41 cpsw, usb_ether Nov 29 15:33:42 Hit any key to stop autoboot: 0 Nov 29 15:33:42 switch to partitions #0, OK Nov 29 15:33:42 mmc0 is current device Nov 29 15:33:42 SD/MMC found on device 0 Nov 29 15:33:44 reading uEnv.txt Nov 29 15:33:48 826 bytes read in 6 ms (133.8 KiB/s) Nov 29 15:33:50 Loaded environment from uEnv.txt Nov 29 15:33:52 Importing environment from mmc ... Nov 29 15:33:54 Running uenvcmd ... Nov 29 15:33:56 reading uImage Nov 29 15:33:58 4985224 bytes read in 566 ms (8.4 MiB/s) Nov 29 15:34:00 Booting from mmc (uEnv.txt configuration) ... Nov 29 15:34:02 ## Booting kernel from Legacy Image at 80200000 ... Nov 29 15:34:04 Image Name: Linux-3.14.0-yocto-standard Nov 29 15:34:06 Created: 2014-11-09 19:13:07 UTC Nov 29 15:34:08 Image Type: ARM Linux Kernel Image (uncompressed) Nov 29 15:34:10 Data Size: 4985160 Bytes = 4.8 MiB Nov 29 15:34:12 Load Address: 80008000 Nov 29 15:34:14 Entry Point: 80008000 Nov 29 15:34:18 Verifying Checksum ... OK Nov 29 15:34:20 Loading Kernel Image ... OK Nov 29 15:34:22 Starting kernel ... Nov 29 15:34:31 after 30 sec u-boot restart Nov 29 15:37:43 lpapp: I don't what I do wrong Nov 29 16:01:10 lpapp: do you have any suggestion? **** ENDING LOGGING AT Sun Nov 30 02:59:58 2014