**** BEGIN LOGGING AT Sun Oct 07 02:59:57 2007 Oct 07 12:03:31 Hello, Oct 07 12:04:11 Anyone reads ? Oct 07 12:04:24 I only writes Oct 07 12:07:39 :-) Oct 07 12:08:29 Hello Marcin, and thanks for all the good work. Oct 07 12:18:51 hrw : I'm wondering ... does HaeRWu bring "enough" work as a business ? Oct 07 12:30:57 stephane: more then enough even Oct 07 12:36:34 hrw: drinks are on you then Oct 07 12:41:16 haha Oct 07 12:41:36 I paid yesterday Oct 07 12:42:03 * XorA missed a free drink Oct 07 12:44:33 hrw : sorry I have to go. Oct 07 12:47:10 no problem Oct 07 13:16:49 hrw: http://www.angstrom-distribution.org/supported-zaurus-machines Oct 07 13:27:03 XorA: add some colons and can also add infos that we can provide hardware Oct 07 13:29:05 colons? Oct 07 13:30:01 "These machines are supported*:*" etc Oct 07 13:31:51 hrw: done Oct 07 13:32:20 hrw: I dont suppose you have a c7x0 here? Oct 07 13:32:26 I do not have Oct 07 13:33:57 XorA: shiney or shiny? Oct 07 18:42:02 hvontres|home: you around? Oct 07 18:46:19 high_roller: what's up Oct 07 19:18:41 hvontres|home: sorry for taking so long to get back, I loaded the latest images on my sl 5600 Oct 07 19:19:47 the pimlico images fail to boot Oct 07 19:19:51 high_roller: which ones? The X11 images currently are too big to flash Oct 07 19:20:01 the x11-image worked Oct 07 19:20:09 I didn't try the gpe images Oct 07 19:20:27 high_roller: any initrd > 21M won't work :( Oct 07 19:20:33 ok Oct 07 19:20:58 I also verified all the bugs I've seen in bugzilla Oct 07 19:21:01 I am getting closer to getting kexec to boot a fs from SD Oct 07 19:21:23 yea, the nice thing is my 2GB sd card works just fine Oct 07 19:21:39 high_roller: good to know. Oct 07 19:21:44 it doesn't work to flash the Zaurus, but angstrom will read it Oct 07 19:22:23 high_roller:for flashing, you need someting formated fat16. I have an old 256MB CF for that Oct 07 19:22:31 has there been any progress on the screen corruption after resume issue? Oct 07 19:24:49 high_roller: Not yet. so far the only thing I can find that works is 2.6.17 :( . Unfortunately, I have very little clue when it comes to kernel stuff, and so far I have not been able to find an obvious place where it could have been broken Oct 07 19:26:04 high_roller: BTW, if you file any bugs, remember to add it to http://bugs.openembedded.org/show_bug.cgi?id=2652 Oct 07 19:26:18 hvontres|home: ok Oct 07 19:27:07 high_roller: where are you located? Oct 07 19:27:15 I'm in Las Vegas, nv, USA Oct 07 19:28:15 cool, finally somebdy in my Timezone.. (SD, CA) Oct 07 19:28:51 SD = San diego? Oct 07 19:29:52 high_roller: yup Oct 07 19:30:08 high_roller: well, actually Oceanside...:) Oct 07 19:30:14 I was just down there last spring, if it weren't so expensive I'd love to live there Oct 07 19:30:45 high_roller: heh... well, I got lucky and bought a place here in '98... Oct 07 19:33:29 not so much luck, just good timing Oct 07 19:38:21 hvontres|home: ext2 formatted card for !collie also works Oct 07 19:45:04 hrw: even poodle? Oct 07 19:45:46 iirc yes Oct 07 19:45:58 it is over year when I had poodle in hands Oct 07 19:48:59 hi there Oct 07 19:49:14 hi Oct 07 19:54:30 are u zaurus user ? Oct 07 19:54:46 i'm looking for an electric adapter Oct 07 19:54:56 anyway to charge my zaurus in a car Oct 07 19:55:28 i've car input/usb output Oct 07 19:55:31 ABC|dOC: buy ipaq 3600/3800/3900/5500 one Oct 07 19:55:39 this is compatible ? Oct 07 19:55:43 any Oct 07 19:55:45 for a sl-c3200 ? Oct 07 19:55:59 all Z has same power connector Oct 07 19:56:06 ok Oct 07 19:56:34 you need to get adapter which end on round connector of course Oct 07 19:57:03 ah ok Oct 07 19:57:13 is there a bundle in a shop ? Oct 07 19:57:32 if you are familiar with solder iron you can create one for youo Oct 07 19:57:44 hmmm Oct 07 19:57:52 i've two left hands Oct 07 19:57:58 with palm instead of fingers :) Oct 07 19:58:00 ;( Oct 07 19:58:03 brb Oct 07 19:58:46 k Oct 07 19:59:46 gtg too Oct 07 19:59:48 c u later Oct 07 21:03:03 what's the "blessed" way to specify timezone in Angstrom? Is changing /etc/profile a good solution? Oct 07 21:13:34 zap: you always ask for "dumb user" way, and yet ignore GUI. GPE has Setting applet to deal with that stuff. Oct 07 21:32:53 psokolovsky: thank you, I missed that somehow Oct 07 21:33:53 zap: there's even Settings applet for gpsd configuration ;-). How it works now is up for your testing though ;-) Oct 07 21:34:16 you mean the serial port setup applet? Oct 07 21:35:42 hmm well, timezone applet doesn't work Oct 07 21:36:08 I don't know what it changes (the settings in applet seems to be preserved) but 'date' still gives me UTC Oct 07 21:37:59 looks like the date applet is incomplete... at least for "Europe" it lists just London, Paris and Moscow... no Berlin even :) Oct 07 21:45:09 zap: that's all stuff to fixxx... Oct 07 21:47:19 yep Oct 07 21:47:52 the settings applets are part of ngstrom or there's some independent author? Oct 07 21:49:32 zap: they're part of GPE, so their "fixing" likely must be done cooperating with that project... Oct 07 21:50:59 Does Angstrom own any source code except maybe some integration scripts? Oct 07 21:52:20 zap: no of course. if you don't consider logo in SVG "a code" ;-) Oct 07 21:54:16 ok now it makes more sense to me :) **** ENDING LOGGING AT Mon Oct 08 02:59:57 2007