**** BEGIN LOGGING AT Thu Dec 20 02:59:57 2007 Dec 20 03:21:04 i tried to assign the driver but the app crashes Dec 20 03:21:23 i think there is problem with z communicating with card Dec 20 03:21:49 doesnt seem to register the device Dec 20 03:21:52 Try configuring wlan0 under the network app (that's what grabs an ip when I did the ifconfig -a) Dec 20 03:22:08 But not familiar with that card, so can't be much help Dec 20 03:22:08 tried that Dec 20 03:22:35 i get only get irda and lo if i ifconfig -a Dec 20 03:23:02 i had wifi working on an earlier console build Dec 20 11:27:09 | *** Configuration avr32-angstrom-linux-uclibc not supported Dec 20 11:27:09 OTE: package gcc-cross-4.1.2-r12: task do_compile: failed Dec 20 11:28:42 hmm why did it pull for 4.1.2 .-.- it used gcc 4.0.2 as initial Dec 20 11:37:17 ah the MACHINE atngw100 misses PREFFERED versions Dec 20 11:37:45 fscking atmel Dec 20 13:33:38 hello Dec 20 13:33:52 hrw: are you here? Dec 20 13:34:36 hrw: with your latest commits I think bug 3441 could be closed (cannot test now) Dec 20 13:34:47 hrw: we have enough open bugs! Dec 20 13:36:11 hi xjqian Dec 20 13:36:21 hi xjqian Dec 20 13:36:51 ant|work: will check it Dec 20 13:38:02 cllosed Dec 20 13:38:31 hrw: nice ! thx Dec 20 13:38:48 * ant thinks: one less Dec 20 16:11:39 I know sdhc works on zaurus sl-c3200, but could someone confirm that it works on a c860?, I'm about to buy a 8gb sdhc Dec 20 16:22:32 I would take zaurus to shop and test Dec 20 16:22:43 I'd like that too Dec 20 16:22:54 basically it should work but no warranty as no one tested such big ones with Z Dec 20 16:25:31 okey, thanks, I'll go to the shop and ask if I can try one Dec 20 19:39:10 hi Dec 20 20:19:09 * ABC|dOC pathetic skill merc avi Dec 20 21:12:32 hi i uncompressed Angstrom-openmoko-image-glibc-ipk-2007.9-test-20071207-a780.rootfs.tar.gz in my mmc and used boot_usb to push zImage-2.6.23-1-mtd-a780 to my phone Dec 20 21:12:40 but all i ge t is garbage Dec 20 21:13:05 i tried reinserting the battery as in one of the chat logs that i found Dec 20 21:13:11 but even that did not work Dec 20 21:13:18 i am not giving any boot params Dec 20 21:13:24 do i need to give any ? Dec 20 21:14:20 hello anybody home? Dec 20 21:39:57 hi anybody helping me ? Dec 20 22:05:46 I just installed angstrom on my zaurus 3200 following http://www.angstrom-distribution.org/angstrom-installation-spitz and it uncompressed some files then it said it was going to reboot. Now nothing boots at all. Dec 20 22:06:37 schme, take another updater.sh Dec 20 22:06:40 some old one Dec 20 22:07:11 Thanks I will try that :) Dec 20 22:08:02 Where do I find an old one though? I can only find the stuff at http://www.angstrom-distribution.org/unstable/images/spitz/RC1/ :) Dec 20 22:10:10 possibly the one from openzaurus will work Dec 20 22:19:26 or Dec 20 22:19:55 this one: Dec 20 22:19:56 http://www.openembedded.org/~hrw/updater.bin Dec 20 22:20:02 renamed to updater.sh Dec 20 22:23:26 Seeing how I can't find an openzaurus one I'll try that one :) Dec 20 22:23:54 Right now I'm waiting for the NAND restore so I can actually write something on the lil SD card ;) Dec 20 22:25:05 :) Dec 20 22:25:24 i've to backup my debian zaurus before trying latest angstrom Dec 20 22:25:40 Life would be so much easier if I had a card reader/writer >< Dec 20 22:25:58 Hmmm. You can install debian on the zaurus? Dec 20 22:26:20 I just got the lil baby like yesterday. Dec 20 22:28:54 you can do everything with zaurus Dec 20 22:29:04 schme, did you know you can put a 16gb cf card into spitz instead of the internal micro hd Dec 20 22:29:20 together with a 4gb sd gets you 20gb pda Dec 20 22:29:25 plus a free xternal cf slot Dec 20 22:30:02 Oh yeah, I understand that you can do anything. i'm just a bit amazed at debian being a decent PDA os :) Dec 20 22:30:24 never tried Dec 20 22:30:30 got an akita Dec 20 22:30:31 debian works great with angstrom kernel :) Dec 20 22:30:42 If I didn't have the wifi card in the cf slot I'd probably put something like 16gb in there, yeah. Dec 20 22:30:52 ouh debian with angstrom kernel. sounds sexy Dec 20 22:31:02 jpmatrix, got a rootfs by chance? Dec 20 22:31:03 it is ;) Dec 20 22:31:17 brb Dec 20 22:43:33 Ok. Time to try that updater.bin then. Dec 20 22:49:13 yes Dec 20 22:49:33 on oesf, zdevil did a rootfs with debian on zaurus Dec 20 22:49:59 but that's not the channel to talk about it ;) Dec 20 22:50:17 however angtrom and debian_zaurus are both eabi :) Dec 20 22:50:59 jpmatrix: That updater you linked to seemed to work I guess :) The one I had rebooted automagically after extracting.. This one gave me a # prompt. Is it safe to reboot or is there more to be done? Dec 20 22:52:34 jpmatrix, well can you still give me the link although it is #angstrom not #angstromkernel ^^ Dec 20 22:54:06 Still no boot >< Dec 20 22:55:18 what the hell.... the rc1 package for spitz does not boot? Dec 20 22:56:01 people talk about no boot in angstrom mailing list Dec 20 22:57:12 Where do I find this magic mailing list? Dec 20 22:57:16 why is it a release candidate then? Dec 20 22:57:33 found it! Dec 20 22:58:10 I think the anouncements of some angstrom developers to give up their zauri had strong impact on the quality of the builds Dec 20 22:59:34 which zaurus do you have? Dec 20 22:59:39 i read that : Dec 20 22:59:40 Angstrom-x11-image-glibc-ipk-2007.11RC1.1-akita-installkit > Seems to work well, and the + works. Dec 20 23:01:05 terrier.. So I figured it was the spitz build I should use. Dec 20 23:03:00 I'll try RC1.1 :) I've been trying RC1 Dec 20 23:07:23 dcordes: you guys are the testers :) That's why these are still RC's :) Dec 20 23:09:07 okok ^^ Dec 20 23:09:32 :) Dec 20 23:10:29 What should I use if I just want something that's you know.. stable..ish ? Dec 20 23:12:42 schme, angstrom _is_ stable Dec 20 23:12:49 once you got it booting there Dec 20 23:12:55 usually it should work ootb ^^ Dec 20 23:13:19 since two or three weeks those flashing issues come up daily Dec 20 23:13:35 Yeah.. but if this RC1.1 won't work I can't find anything else to try. There's just rc1 and rc1.1 :P Dec 20 23:13:55 schme, try autobuild Dec 20 23:14:02 That's what I'm doing now :) Dec 20 23:14:14 hmmm pizza boston Dec 20 23:14:31 I just need to reflash it back to sanity so I can boot up the original OS and put stuff on the SD card and try to install again. Dec 20 23:14:59 What is on a pizza boston? Dec 20 23:15:09 schme, card reader would truely be of use Dec 20 23:15:27 It would, yeah :) Dec 20 23:15:54 spinach almond and some nice sauce Dec 20 23:16:01 O.o Dec 20 23:16:07 eheh Dec 20 23:16:26 I thought egg and french fries on pizza was strange. Dec 20 23:16:31 bon appĂȘtit ! Dec 20 23:16:37 thanks Dec 20 23:30:55 i dont suppose anyone knows how to chagethe font size on the fly in rxvt (in gpe/ if it matters) Dec 20 23:32:39 Well that sure didn't boot either. Dec 20 23:32:49 >< Dec 20 23:33:55 :) Dec 20 23:34:23 debian zaurus backup is in progress! tomorrow morning : install of latest angstrom :) Dec 20 23:35:08 I wish you better luck than I am having with booting it. Dec 20 23:41:35 ... Dec 20 23:42:44 * Sketch is typing via rc1 on his c3100 Dec 20 23:43:22 Weird. When I try to boot the screen quickly flashes whiteish and then goes black. Dec 20 23:43:44 Sketch: Did you do some special magic stuff when you installed it? Dec 20 23:44:15 not reallly/ though i am using the akita image not the spitz image because i didnt want to reformat my hd yet Dec 20 23:44:41 and i used an old updater.sh Dec 20 23:45:25 What is the difference between the akita image and the spitz image? And where on earth do I find an old updater.sh ? :) Dec 20 23:45:55 quick flash of screen and going black is a typical battery problem, not ? Dec 20 23:46:11 spitz image is bsically just the bootloader/ the rest gets installed on the hd Dec 20 23:46:13 are you charging while booting? Dec 20 23:46:22 jpmatrix: Yes. Dec 20 23:46:46 akita has no hd, so its a larger image with the base OS on it Dec 20 23:46:57 (and not much room to install sw) Dec 20 23:47:39 i just wanted to make sure everything works reasonably well (hardware wise) before i blow away the HD Dec 20 23:47:57 I'll try that akita image tomorrie :) Dec 20 23:48:20 its more stable than cacko was at least ;) Dec 20 23:48:29 What is cacko? Dec 20 23:48:40 a sharp based rom Dec 20 23:49:10 sharp rom + some updated software basically Dec 20 23:49:27 still uses 2.4 kernel with sharp binary modules Dec 20 23:49:28 Aah. Dec 20 23:49:39 Well that's no fun (: Dec 20 23:49:52 indeed Dec 20 23:50:05 and qpe Dec 20 23:50:18 I'm feeling like I should just give up on all this and install obsd on it. Dec 20 23:51:03 Mmm. sleep. try akita. cry and cry when it won't work. Dec 20 23:51:15 Thanks for all the help :) Dec 20 23:51:49 no problem Dec 20 23:54:52 you can also try debian zaurus ;) Dec 20 23:55:10 i liked a lot openbsd. i only miss the bluetooth rfcomm part... Dec 20 23:56:43 I have had bad experiences with openbsd in the past. That is why I want ze linux. Dec 20 23:57:39 yeah openbsd was (is?) not perfect .... sdwrite, bluetootth... Dec 20 23:58:34 My issues with it was more of the sort that certain software did not compile. Dec 20 23:59:19 i didn't have any compile problem with openbsd .... even firefox compiled ! but future of my zaurus is either debian zaurus or angstrom, both being eabi, and both running angstrom kernel :) Dec 20 23:59:42 (c3000) Dec 20 23:59:49 Yeah. Firefox compiled fine. clisp not so fine. Dec 20 23:59:57 oh ok Dec 21 00:00:25 I'll look into the debian stuff. The idea of angstrom seems nicer though. Dec 21 00:00:28 Now sleep time. Dec 21 00:00:38 same for me ;) Dec 21 00:00:48 tomorrow i'll try Angstrom-x11-office-image-glibc-ipk-2007.11RC1-spitz.rootfs.tar.gz Dec 21 01:39:16 hi i just pressed resume on my poodle in hope of getting my dlink dcf-660w working by checking /etc/pcmcia/config file, when the light started flashing and it seemed just to start working ;) Dec 21 01:41:33 anyone know how to switch apps on poodle ? Dec 21 01:42:00 like if i open 2 apps how can i switch between them ? Dec 21 01:51:33 hi :) Dec 21 01:55:45 wifi not working again :( Dec 21 01:59:25 on startup im getting Dec 21 02:00:17 configuring network interfaces... SIOCGIFFLAGS: No such Device Dec 21 02:00:35 eth0 No such Device Dec 21 02:01:01 ??? Dec 21 02:11:38 i also get the error no file /var/run/eth. or something like that Dec 21 02:11:58 cant really see it its when i type poweroff Dec 21 02:20:36 !logs Dec 21 02:20:36 Channel logs for #angstrom are archived at: Dec 21 02:20:37 http://hentges.net/tmp/logs/irc/%23angstrom Dec 21 02:20:39 Live-logs are available at Dec 21 02:20:40 http://hentges.net/tmp/logs/irc/livelogs/%23angstrom.livelog Dec 21 02:20:43 See ?? help-logs for usage instructions Dec 21 02:37:35 anyone know if eth0 is needed for wifi ? i removed it from /etc/network/interfaces to remove the error but still no wlan0 in ifconfig Dec 21 02:41:14 got wlan0 back up :) Dec 21 02:41:47 but this time i tired to ping something and poodle hung with screen corruption until i unplugged the card Dec 21 02:43:51 ok wifi card is now working but im getting wierd screen corruption with lines down the screen and it hangs Dec 21 02:54:10 ok got it ping working :) Dec 21 02:55:14 but then it stopped and i got wifi0: cannot get RID fd51 (len=6) - no PRI f/w Dec 21 02:55:34 im guessing theres no prism firmware Dec 21 02:56:09 hope this helps :) **** ENDING LOGGING AT Fri Dec 21 02:59:56 2007