**** BEGIN LOGGING AT Tue Aug 19 02:59:56 2008
Aug 19 06:46:11 <ventyl> hi!
Aug 19 08:00:46 <ventYl> anybody with working angstrom 2008.1 on ipaq h2215? i have some problems with kernel
Aug 19 10:26:28 <arturo_on_rails> Hi all.  This might be an FAQ question, but, acx doesn't seem to support WPA.  Is that a limitiation of the hardware or of the driver?
Aug 19 10:27:08 <XorA> it should do
Aug 19 10:33:16 <arturo_on_rails> XorA: Ah, so it now supports WPA?  I am on a hx4700 and was about to reflash it yet again after some time
Aug 19 10:33:29 <XorA> acx is athereos?
Aug 19 10:33:48 <arturo_on_rails> XorA: mmm..  dunno.  the modules are acx and acx_4700
Aug 19 10:34:25 <XorA> I suspect the hardware supports it, whether the linux driver is upto scratch I dont know, if its atheros then WPA seems to be working on GTA02
Aug 19 10:34:39 <XorA> probably best if you wait until an Ipaq guy answers
Aug 19 10:35:01 <arturo_on_rails> ok, thx
Aug 19 13:42:23 <udovdh> please see http://rafb.net/p/fIMh0Q24.html
Aug 19 13:42:28 <udovdh> is this a known issue?
Aug 19 13:55:32 <ventYl> udovdh: first three lines? yes, i saw it few months ago in slackware
Aug 19 13:55:57 <ventYl> udovdh: btw, any working angstrom kernel for ipaq h2215? i can't run successfully any
Aug 19 13:56:34 <udovdh> I have a working kernel
Aug 19 13:56:36 <udovdh> just the angstrom one
Aug 19 13:56:40 <udovdh> what is your issue?
Aug 19 13:56:50 <udovdh> building? running?
Aug 19 13:57:21 <ventYl> bitbakes builds successfully (2.6.16) haret boots kernel successfully, but just after line Freeing init memory: 84k booting stops
Aug 19 13:57:46 <ventYl> but i am still able to press buttons on keypad and see feedback
Aug 19 13:58:39 <udovdh> 2.6.21 here
Aug 19 13:58:47 <ventYl> 2.6.21 the same problem
Aug 19 13:58:52 <udovdh> Linux h2200 2.6.21-hh20 #1 PREEMPT Sat Aug 9 13:01:09 CEST 2008 armv5tel unknown
Aug 19 13:59:01 <udovdh> slightly patched angstrom kernel
Aug 19 13:59:09 <udovdh> did you use a console?
Aug 19 13:59:13 <udovdh> to see what happens?
Aug 19 13:59:22 <ventYl> i have handhelds-2.6.21-hh20 kernel too
Aug 19 13:59:24 <udovdh> maybe you aren't waiting long enough?
Aug 19 13:59:31 <udovdh> and does that one work?
Aug 19 13:59:37 <ventYl> i was waiting for 10 minutes
Aug 19 13:59:40 <ventYl> nothing happend
Aug 19 14:00:12 <ventYl> rootfs mounted successfully according to console output
Aug 19 14:00:22 <udovdh> strange
Aug 19 14:00:23 <ventYl> i've tried both CF and SD boot
Aug 19 14:00:29 <udovdh> here I don't have problems
Aug 19 14:00:42 <udovdh> even with a kernel taht I built myself from the angstrom sourcetree
Aug 19 14:00:46 <ventYl> the only two kernels which boot are ramdisk rescue and some ancinet kernel from familiar
Aug 19 14:00:50 <udovdh> with minor patching
Aug 19 14:01:03 <udovdh> see http://wiki.navit-project.org/index.php/Navit_on_Ångström
Aug 19 14:01:10 <udovdh> and the CF GPS part
Aug 19 14:01:25 <udovdh> strange
Aug 19 14:01:29 <udovdh> hardware issue?
Aug 19 14:03:24 <ventYl> dunno
Aug 19 14:03:41 <ventYl> from some source i've had 2.6.22 kernel, which was able to boot
Aug 19 14:03:54 <ventYl> but no modules were available, so touchpad didn
Aug 19 14:03:59 <ventYl> 't work for me
Aug 19 14:04:27 <udovdh> try to build
Aug 19 14:04:35 <udovdh> change build environment to recommended one?
Aug 19 14:04:57 <ventYl> build environment was established complete from how to build angstrom article
Aug 19 14:06:17 <ventYl> maybe i'll try to apply defconfig from 2.6.21-hh120 to vanilla 2.6.22
Aug 19 14:08:02 <udovdh> your hardware is?
Aug 19 16:06:33 <boris_OmegA> hi
Aug 19 17:00:22 <udovdh> ventYl, any hardware info?
Aug 19 18:04:53 <ventYl> udovdh: sorry, i've been away
Aug 19 18:05:04 <udovdh> np
Aug 19 18:05:09 <ventYl> what exactly do you want to know about hardware?
Aug 19 18:05:24 <udovdh> just interested to see if your hardware is perhaps newer tahn the h2200 ipaq line
Aug 19 18:05:35 <udovdh> which has quite nice support
Aug 19 18:06:38 <ventYl> from what i've get mainboard is rev B
Aug 19 18:08:32 <ventYl> rom date is 05/22/03
Aug 19 18:08:42 <ventYl> so hardware wouldn't be newer
Aug 19 18:18:23 <udovdh> hmm.. would have to look into it to see
Aug 19 18:18:28 <udovdh> will be back tomorrow
Aug 19 18:18:31 <udovdh> later
Aug 19 18:20:07 <ventYl> strange is, that ramdisk rescue boots successfully
**** ENDING LOGGING AT Wed Aug 20 02:59:56 2008