**** BEGIN LOGGING AT Tue Oct 27 02:59:56 2009
Oct 27 11:05:36 <rgammans> I've just bought a device with Angstrom preloaded. But I need some extra pkgs installed. One of which isn't (complete) in the feeds. Is there an easy way to pull dependencie in before trying to build.  
Oct 27 11:06:18 <rgammans> I new to angstrom and open embedded - but not cross compiling in general 
Oct 27 11:33:01 <Crofton> rgammans, what device?
Oct 27 11:48:40 <rgammans> aml 8050
Oct 27 11:51:43 <Crofton|work> hmmm
Oct 27 11:51:59 <Crofton|work> I would ask aml
Oct 27 11:52:44 <Crofton|work> basically, I'm not sure if support for that went into OE
Oct 27 11:52:53 <Crofton|work> and you will need to match toolchain versions
Oct 27 11:53:26 <rgammans> Ok. There's mention of it in the chnagelogs. But I'm worried about mismchted version of the libs etc..,
Oct 27 11:53:51 <Crofton|work> yeah, I would start by asking aml
Oct 27 11:54:13 <Crofton|work> http://www.barcodeplanet.com/aml/m8050.htm?aw&gclid=CNLf1K2V3Z0CFVRM5QodRygQOQ
Oct 27 11:54:20 <Crofton|work> this, right?
Oct 27 11:54:50 <rgammans> yeah. ( http://www.amltd.com/M8050.asp)
Oct 27 11:54:55 <Crofton|work> yep
Oct 27 11:55:08 <Crofton|work> I'm not sure if they sent the conf files back to us
Oct 27 11:55:17 <Crofton|work> I just did a quick look
Oct 27 11:55:31 <broonie> prpplague would know, I guess.
Oct 27 11:56:10 <Crofton|work> I messaged him
Oct 27 11:56:14 <Crofton|work> a bit early for hom
Oct 27 11:56:31 <broonie> I'm surprised it's not early for you :)
Oct 27 11:56:53 <Crofton|work> 8 AM
Oct 27 11:57:05 <Crofton|work> I get up at a normal time these days
Oct 27 11:58:39 <rgammans> I'll ask my support contact. What's the simplest term I could use to ask for what I need. I suspect it going to be filter thru a bunch of guy not v. familiar with linux even
Oct 27 12:25:45 <Crofton> hmmm
Oct 27 12:26:19 <Crofton> I guess just explain what you need.
Oct 27 13:43:22 <prpplague> rgammans: ping
Oct 27 13:43:27 <rgammans> hi
Oct 27 13:43:38 <prpplague> rgammans: greetings
Oct 27 13:44:14 <prpplague> rgammans: see /msg
Oct 27 19:27:58 <lim_> hi, I'm using angstrom kernel 2.6.29 built from narcissus on a BB revB5 and it is frozen at [38.133941] IrCOMM protocol (Dag Brattli)  .. Does anyone have any idea what does it mean? 
Oct 27 19:43:00 <lim_> hi, can someone tell me if I'm doing something wrong? I cloned linux-omap-2.6  then I did git checkou to the 2.6.29 knl, got the patch.diff .gz, applied it. Do I need to run make distclean, omap3_beagle_defconfig, menuconfig, make uImage modules...... or the patch does everything and I only need to type "make uImage modules"
Oct 27 20:27:41 <ETalvala> Hey, I'm trying to build an angstrom image for the omap3evm, and I'm getting an error on one task when executing 'bitbake task-base':
Oct 27 20:28:01 <ETalvala> ERROR: function do_compile failed ERROR: see log in /oe/angstrom-dev/work/omap3evm-angstrom-linux-gnueabi/omap3-sgx-modules-1.3.13.1607-r46/temp/log.do_compile.6322
Oct 27 20:28:11 <Crofton> can you pastebin the error
Oct 27 20:30:03 <ETalvala> http://pastebin.com/d7ad9c2ca
Oct 27 20:30:10 <ETalvala> that's the do_compile log
Oct 27 20:32:25 <ETalvala> It looks to be some part of the graphics drivers for the PowerVR chip on the OMAP3, which I can live without for now, but I'm not sure how to remove that task from the build if I wanted to.
Oct 27 20:42:36 <ETalvala> Anybody have any ideas on what I could try to fix/bypass this?
**** ENDING LOGGING AT Wed Oct 28 02:59:58 2009