**** BEGIN LOGGING AT Wed Jul 10 02:59:59 2013
Jul 10 04:37:46 <ka6sox> evening
Jul 10 04:41:07 <ka6sox> mluckham2, have you given up the ghost for the day?
Jul 10 06:01:22 <vvu> have all students done their videos ?
Jul 10 06:02:00 <ka6sox> I suspect not
Jul 10 06:02:19 <ka6sox> panto, so did you and jj2baile reach a concensus?
Jul 10 06:02:44 <ka6sox> with the change of the 2 bits away from the ones used by eMMC are we clear?
Jul 10 06:02:56 <ka6sox> (please answer after coffee)
Jul 10 06:03:49 <panto> we should
Jul 10 06:03:54 <jj2baile> I believe it was agreed it would probably be fine
Jul 10 06:04:01 <panto> it's way too friggin early to think without coffee
Jul 10 06:04:10 <panto> jj2baile, yes
Jul 10 06:07:03 <jj2baile> ka6sox: I think it may be the case that input with the pru direct mode may not work without bit 5 being set (i.e. the input enable bit). If this is the case, might want to make one last edit of your table, to reflect this: input mode from 0x06 to 0x26
Jul 10 06:07:53 <jj2baile> oh hey. the edit buttons on the wiki show up when you actually log in :)
Jul 10 06:09:44 * vvu needs to take a day and do all documentation video and things like that
Jul 10 06:11:59 <ka6sox> GPI or GPO?
Jul 10 06:13:16 <jj2baile> for GPI
Jul 10 06:13:16 <ka6sox> (you are referring to)
Jul 10 06:13:18 <ka6sox> okay
Jul 10 06:13:37 <jj2baile> i'd tried input with just 0x06 the night before (and a sanity check today) and it failed, but with 0x26 it works.
Jul 10 06:13:56 <jj2baile> Which makes sense, since the input enable bit would be off for just 0x06
Jul 10 06:21:37 <ka6sox> jj2baile, do you agree for the RX case its GPI[0:7], Start/Stop(O), Full(I), Clock(I)?
Jul 10 06:22:20 <ka6sox> and for TX its GPO[0:7], Start/Stop(O), Empty(I), Clock(O)?
Jul 10 06:23:17 <jj2baile> by [0:7] you refer to the first 8 pins of the PR1_PRU<n>_whatever
Jul 10 06:23:23 <jj2baile> ?
Jul 10 06:23:48 <jj2baile> But, yes. That seems agreeable.
Jul 10 07:19:28 <ka6sox> pruX_pru_r[30,31]_[0:7]
Jul 10 10:57:37 <jj2baile> mmm quiet night.
Jul 10 11:04:43 <bradfa> morning jj2baile
Jul 10 13:14:07 <mluckham-mobile> Monitoring
**** BEGIN LOGGING AT Wed Jul 10 14:08:56 2013
Jul 10 15:33:17 <prpplague> meeting starts in 30  minutes right?
Jul 10 15:34:44 <hatguy> yep
Jul 10 15:46:35 <beng-> ok
Jul 10 15:52:02 <jkridner> ugh.  Limechat has been giving me greif.
Jul 10 15:52:05 <jkridner> grief even
Jul 10 15:52:22 <ka6sox> yup
Jul 10 15:55:38 * jkridner checks the blogs for the latest reports and reminds self of actions not completed. :(
Jul 10 15:56:00 <vmayoral> hi everybody
Jul 10 15:56:06 <beng-> hi everyone
Jul 10 15:56:12 * beng- is here for team tcort / minix
Jul 10 15:56:17 <tcort> hi
Jul 10 15:59:21 * vvu wants to tell jkridner video is ready in 2 days but 1st hides :)
Jul 10 15:59:23 <ZubairLK> hi
Jul 10 15:59:28 <ZubairLK> hi
Jul 10 15:59:41 <ZubairLK> good morning folks :)
Jul 10 15:59:45 <koen> hiding from kridner is pretty much always the smart thing to do :)
Jul 10 15:59:51 <jkridner> gm vmayoral, ka6sox, beng-nl, tcort, ZubairLK, koen
Jul 10 16:00:09 <ZubairLK> *video. lol. *cough**
Jul 10 16:01:15 * jkridner wonders if GSoC blog feed is incomplete
Jul 10 16:01:31 <jkridner> alright... let's get started.
Jul 10 16:01:35 <beng-nl> ok
Jul 10 16:01:58 <jkridner> I've got blog reports from vvu, tcort, vmayoral
Jul 10 16:01:59 * jkridner looks for more
Jul 10 16:02:15 <ZubairLK> i've updated my blog too
Jul 10 16:02:19 <ZubairLK> :s
Jul 10 16:02:43 <ZubairLK> on the weekend i think..
Jul 10 16:02:54 <hatguy> I made a post too!
Jul 10 16:02:55 <jkridner> somehow http://beagleboard-gsoc13.blogspot.com/ didn't get saved by feedly.
Jul 10 16:03:03 <ZubairLK> anyways. i'll sum up.
Jul 10 16:03:16 <ZubairLK> adc fixed and MERGED in koens tree for 3.8
Jul 10 16:03:16 <anujdeshpande> jkridner: This weeks post has been delayed a little, we have one demo for the bacon cape, second is on its way. will blog as soon as that's done.
Jul 10 16:03:32 <ZubairLK> jkridner: and adc fixed and MERGED in koens tree for 3.11 :)
Jul 10 16:03:47 <koen> and in panto's tree as well
Jul 10 16:03:48 <jkridner> ZubairLK: thanks, found your report
Jul 10 16:03:52 <ka6sox> morning koen et.al.
Jul 10 16:03:58 <koen> if only mainline wasn't so fucked on am335x right niw
Jul 10 16:03:59 <ZubairLK> now working on continuous adc sampling.
Jul 10 16:04:00 <koen> now*
Jul 10 16:04:01 <ZubairLK> and its a pain!
Jul 10 16:04:07 <koen> hey ka6sox
Jul 10 16:04:35 <jkridner> hatguy, anujdeshpande: would still be great if http://prpplague.github.io/Energia/ included links to your individual blogs.
Jul 10 16:04:50 <ZubairLK> iio changed massively sinced TI improved their driver in arago based on 3.2..
Jul 10 16:04:51 <ka6sox> morning koen
Jul 10 16:04:54 <ZubairLK> since*
Jul 10 16:04:56 <hatguy> jkridner, yeah... sorry about that...will fix it today...
Jul 10 16:04:58 <jkridner> ZubairLK: yeah, I saw koen applied your 3.8 changes.
Jul 10 16:05:02 <prpplague> jkridner: i'll get them to update that
Jul 10 16:05:17 <jkridner> hatguy: what is your blog link?
Jul 10 16:05:27 <hatguy> jj2baile, http://meanbot.wordpress.com/
Jul 10 16:05:28 <_av500_> gm
Jul 10 16:05:30 <hatguy> jkridner, http://meanbot.wordpress.com/
Jul 10 16:05:50 <prpplague> jkridner: i've added a redirect on the wiki so the incorrect url that is on the gsoc page will go to the correct page
Jul 10 16:06:19 <vvu> jkridner: small enquiry, any idea of my board if it is on its way to Romania ?
Jul 10 16:07:07 <vmayoral> i had some of the same doubts regarding the BBB and the Audio cape but it seems that Cathy took care of it on my side
Jul 10 16:07:10 <jkridner> vvu: Did you have an exchange with cwicks this week?
Jul 10 16:07:16 <vvu> jkridner: nop
Jul 10 16:07:28 <jkridner> vvu: are you blocked currently?
Jul 10 16:07:35 <vvu> jkridner: not at all
Jul 10 16:07:57 <jkridner> _av500_: is the hardware needed by vvu noted in the spreadsheet?
Jul 10 16:08:04 <_av500_> jkridner: yes
Jul 10 16:08:08 <_av500_> since long
Jul 10 16:08:15 <_av500_> he needs a BBB
Jul 10 16:08:22 <_av500_> in theory
Jul 10 16:08:30 <_av500_> practically, he has his own
Jul 10 16:09:10 <jkridner> k.  I see cwicks noted she would have it shipped via TI fulfillment (Harte Hanks)
Jul 10 16:09:23 <jkridner> I'll ping her on that.
Jul 10 16:09:49 <vvu> mhmh if it is not shipped already i have http://ro.farnell.com/ if it is easier for you guys
Jul 10 16:10:04 <jkridner> jj2baile, anujdeshpande: are you planning blog updates today?
Jul 10 16:10:34 <anujdeshpande> jkridner: yepp
Jul 10 16:12:00 <jkridner> wait, is jj2baile PRU project... guess I saw a post there.
Jul 10 16:12:30 <jkridner> jj2baile: are you still stuck with pinmuxing issues?
Jul 10 16:13:04 * jkridner summarizes blog owners again
Jul 10 16:13:07 <jkridner> ZubairLK: http://beagleboard-gsoc13.blogspot.com/
Jul 10 16:13:17 <jkridner> anujdeshpande: http://anujdeshpande.wordpress.com/
Jul 10 16:13:43 <jkridner> vmayoral: http://beagleros.wordpress.com/
Jul 10 16:13:55 <jkridner> vvu: http://beagleboot.vdev.ro/
Jul 10 16:14:03 <jkridner> tcort: http://minix-i2c.blogspot.com/
Jul 10 16:14:11 <jkridner> jj2baile: http://zecozephyr.github.io/
Jul 10 16:14:26 <jkridner> hatguy: http://meanbot.wordpress.com/
Jul 10 16:14:52 <ZubairLK> my blog crossed 1000 views. *victory jingle*
Jul 10 16:14:59 <jkridner> anujdeshpande + hatguy: http://prpplague.github.io/Energia/
Jul 10 16:15:41 <jkridner> hi cwicks!
Jul 10 16:15:51 <cwicks> good morning, sorry to be late
Jul 10 16:15:56 <jkridner> we were asking about the Black for vvu (Romania) earlier.
Jul 10 16:16:02 <jkridner> jj2baile: you here?
Jul 10 16:16:17 <jkridner> jj2baile: I'm concerned your report made it sound like you were stuck on pinmuxing.
Jul 10 16:16:29 <jkridner> ka6sox, bradfa: do you know if jj2baile is stuck?
Jul 10 16:16:41 <ka6sox> he got unstuck yesterday
Jul 10 16:17:05 <ka6sox> the last 2 days we have made progress on the pinmuxing and testing issues
Jul 10 16:17:48 <ka6sox> jj2baile, are you here?
Jul 10 16:18:03 <jkridner> ka6sox: thanks. good to hear you have good contact. he's also usually here, so not too worried.
Jul 10 16:18:03 <ka6sox> he said he would be working on video and the blog some more  too.
Jul 10 16:18:24 <ka6sox> ya, but he did get hung up on pinmux and DTC like everyone seems to.
Jul 10 16:18:33 <ka6sox> so its good he understands it now.
Jul 10 16:19:12 <jkridner> ZubairLK: I don't see gregkh, but I know you've been interacting well with koen. Are you getting what you need regarding mentorship? Do you know if your mentors think you are making sufficient progress?
Jul 10 16:19:52 <ZubairLK> koen: I think progress is ok. what do you think?
Jul 10 16:20:27 <prpplague> jkridner: http://www.elinux.org/Userspace_Arduino
Jul 10 16:20:33 <prpplague> jkridner: added links to all three blogs
Jul 10 16:20:54 <hatguy> prpplague, thanks :)
Jul 10 16:21:02 <ZubairLK> jkridner: i'm ok with passive communication :). Thank-fully things are moving along and all seems ok.
Jul 10 16:21:10 <jkridner> sweet.  shall we change the homepage entry on http://beagleboard.org/project/userspace-arduino to point to that wiki page?
Jul 10 16:21:37 <hatguy> jkridner, yeah... anujdeshpande I guess you have access to that
Jul 10 16:21:42 <jkridner> prpplague: are you comfortable you understand my expectations as well as needs of anujdeshpande and hatguy to make continued progress?
Jul 10 16:22:23 <anujdeshpande> jkridner: blog post is up !
Jul 10 16:22:40 <anujdeshpande> jkridner: will change the entry on projects page too
Jul 10 16:22:45 <prpplague> jkridner: i am most comfortable with the needs for anujdeshpande and hatguy, i am still somewhat unclear of all the requirements on your part. based on your last email i think we have everything
Jul 10 16:22:46 <jkridner> prpplague: I know there were some questions about getting a code base that included the Bridge API that Arduino uses on their new networked/Linux-enabled Yun, but I am waiting for responses from them for my queries and don't want you to slow down in implementing libarduino.
Jul 10 16:22:47 * vvu cannot access his blog. can someone try http://beagleboot.vdev.ro/ ?
Jul 10 16:23:04 <prpplague> jkridner: there are no issues on that
Jul 10 16:23:26 <ZubairLK> vvu: accessible
Jul 10 16:23:37 <jkridner> vvu: it works for me too.
Jul 10 16:23:45 <vmayoral> vvu: for me too
Jul 10 16:24:15 * vvu sits back and relax while page loads
Jul 10 16:24:40 <jkridner> tcort, beng-nl: I see lots of steady progress from your project. Any concerns from your side as I don't ping you a lot?
Jul 10 16:25:13 <jkridner> cwicks: any questions/announcements while we seem to have 6 of 7 GSoC students on-line?
Jul 10 16:25:35 <ZubairLK> jkridner: i'm chugging along fixing the adc drivers. is there a requirement I should be aware of on your end?
Jul 10 16:25:48 <jkridner> cwicks: (and 5 of 6 mentors)
Jul 10 16:25:52 <cwicks> I think everyone has a base board either in their hands, on the way or getting unstuck from international shipping
Jul 10 16:26:02 <cwicks> send me email to c-wicks@ti.com if that is not the case.
Jul 10 16:26:04 <tcort> jkridner: no concerns from me. so far things are going great. everything seems to be really straightforward thanks to all of the docs (TRM, SRM, etc).
Jul 10 16:26:34 <cwicks> For the peripherals requested from non-TI vendors, I am having some troubles but will contact each team this week to work those out.
Jul 10 16:26:43 <beng-nl> jkridner: i think we're going smoothly, tcort is doing a great job and we occasionally chat about minix specific stuff
Jul 10 16:26:44 <prpplague> cwicks: i took care of my team, so there are no issues on that from me
Jul 10 16:26:54 <cwicks> thank you prpplague
Jul 10 16:26:55 <jkridner> ZubairLK: you know my requirement is to see regular weekly progress reports and communication about what you are doing (video) and its value. for you, I'd really want to see the e-mails to upstream maintainers with patches for comment.
Jul 10 16:27:49 <jkridner> cwicks: are there particular bits of hardware giving you grief?
Jul 10 16:28:11 <cwicks> shields aren't done yet
Jul 10 16:28:16 <ZubairLK> jkridner: upstream is an intention. and the work till now has built a base for it. i'll try and give time to the video.
Jul 10 16:28:34 <beng-nl> jkridner: i invited you to our minix i2c design doc in which much coordination is done so you can see in as much detail as you wish what's going on, apart from other sources
Jul 10 16:28:52 <jkridner> ZubairLK: basic background on iio and why we want it is helpful.
Jul 10 16:28:56 <cwicks> I'd like to make sure we have a valid business shipping address for each team member on the spreadsheet regardless of if they need additional HW shipments please - can the mentors take that job on?
Jul 10 16:29:01 <jkridner> beng-nl: thanks
Jul 10 16:29:03 <jj2baile> jkridner: Hey! Sorry I'm late, just got up. Not stuck on that. Was just the last thing I felt the need to blog about
Jul 10 16:29:22 <jkridner> jj2baile: thanks!
Jul 10 16:29:32 <ZubairLK> jkridner: thank-you.
Jul 10 16:29:52 <jj2baile> jkridner: I was thinking I would write another blog post yesterday, But wasn't really sure what to write about
Jul 10 16:30:13 <cwicks> Mentors - can I have a roll call thumbs up please on addresses for your teams?
Jul 10 16:30:36 <ka6sox> cwicks, ours are good for businesses
Jul 10 16:31:23 <ZubairLK> umm. The university of leeds one is good as I've received the original BBB shipment..
Jul 10 16:31:31 <jkridner> cwicks: mentors here are koen, prpplague, ka6sox, beng-nl (for keesj), _av500_
Jul 10 16:31:52 <jkridner> gregkh isn't here, so I'd guess it'd be koen for gregkh
Jul 10 16:31:58 <beng-nl> cwicks: i don't get it; you want us to say whether we have a business-compatible address? tcort is actually receiving the hw and he has someone to receive the package(s) for him
Jul 10 16:32:06 <jkridner> (or perhaps mdp, Ceriand)
Jul 10 16:32:11 * _av500_ has a good address
Jul 10 16:32:19 <jkridner> (or Tartarus)
Jul 10 16:32:23 <beng-nl> tcort: do we need to address (no pun intended) anything there?
Jul 10 16:32:44 <tcort> cwicks, beng-nl: my mailing address via Carleton University worked for the xM. It is still valid for when you ship the Weather Cape.
Jul 10 16:33:05 * jkridner imagines cwicks having a box of t-shirts (sorry if I'm right and giving something away). ;-)
Jul 10 16:33:17 <beng-nl> :)
Jul 10 16:33:26 <Ceriand> cwicks: I don't need anything, but my address is probably old if you're using the one from last GSoC
Jul 10 16:33:34 <ZubairLK> *we get a t-shirt!? :P*
Jul 10 16:34:12 <beng-nl> cwicks: if you want mentor addresses, that'd be a new one
Jul 10 16:34:12 * jkridner whispers to ZubairLK: this is my way of pushing on cwicks to get us some ;-)
Jul 10 16:34:30 <beng-nl> :)
Jul 10 16:34:40 <anujdeshpande> jkridner: project page on beagleboard.org points to wiki now
Jul 10 16:34:45 <jkridner> anujdeshpande: thanks!
Jul 10 16:34:50 <anujdeshpande> +1 for the T shirts !
Jul 10 16:34:54 <beng-nl> +1
Jul 10 16:34:59 <vvu> +11
Jul 10 16:35:05 <ZubairLK> * jkridner a technique to keep in the repository for future use. :)*
Jul 10 16:35:27 <jj2baile> mmm, It wasn't even entirely dtc that I had issue with. There is good material online  about it. I'm fairly sure the interference of the hdmi module was probably the reason my early attempts didn't work
Jul 10 16:35:30 <ZubairLK> Go cwicks! :) +1.
Jul 10 16:35:49 <jj2baile> I was however, dissappointed one could only change pinmuxing via dt.
Jul 10 16:36:10 <vmayoral> jkridner, koen: regarding beagle-ros, the basic stuff seems to work and i've gone through the most relevant tutorials to get started. I was thinking about starting with the capes soon. Since it seems that the audio cape might take a while, should i reorder my schedule and start first with the IMU + Motors (i have the material for these)
Jul 10 16:36:16 <_av500_> cwicks: I need 2XL :)
Jul 10 16:36:23 <_av500_> at least
Jul 10 16:36:25 <vmayoral> koen: maybe you want me to give it a try to the rosdep issue?
Jul 10 16:36:38 <ds2> address used is business.
Jul 10 16:36:39 <ZubairLK> cwicks: XL :p
Jul 10 16:36:59 <prpplague> cwicks: none for me
Jul 10 16:37:14 * Tartarus is semi-here, what now jkridner? :)
Jul 10 16:37:33 <ZubairLK> * jkridner 's technique works! *
Jul 10 16:37:39 <jkridner> was just looking for help in making sure all of the addresses were correct on the spreadsheet for cwicks
Jul 10 16:37:59 <Ceriand> jkridner: spreadsheet link?
Jul 10 16:37:59 * jkridner causes all sorts of headaches for cwicks by setting evil expectations
Jul 10 16:38:11 <cwicks> ZubairLK and all - yep I'm seeing if I can get some little goodies sent out - so action is for all team members, mentors plus students to have a valid business name and business address on the sheet
Jul 10 16:38:32 <hatguy> cwicks, where's the link?
Jul 10 16:38:33 <ZubairLK> +1!
Jul 10 16:38:37 <ZubairLK> cwicks: thank-you :)
Jul 10 16:38:59 <jkridner> Ceriand: bradfa, koen or gregkh should be responsible for making sure you are on the list, but I'll look to share access to you.
Jul 10 16:39:02 <ka6sox> jj2baile, you will have to bring another Beer to wmat
Jul 10 16:39:15 <jkridner> hatguy: prpplague should update the data for you.
Jul 10 16:39:27 <beng-nl> cwicks: that's really nice! sorry, i don't know which sheet you mean though?
Jul 10 16:39:29 <hatguy> jkridner, sure :)
Jul 10 16:39:29 <prpplague> jkridner: can you share that with me?
Jul 10 16:39:37 <jj2baile> I should also remember to update that last blog post before writing another. That was made in the middle of the night so I wouldn't forget about what i was doing.
Jul 10 16:39:38 * ka6sox too
Jul 10 16:39:40 <ds2> cwicks: you actually need a business name for the address? not just confirmation it is a business address for UPS/Fedex/etc purposes?
Jul 10 16:39:41 <cwicks> i can't promise what yet.  it depends on what export will allow - i could give a long story about trying to get packages out last year that included a 25 cent beach ball
Jul 10 16:39:48 <jkridner> Ceriand: just sent you an invite to the doc.
Jul 10 16:39:55 <Ceriand> jkridner: thanks
Jul 10 16:40:05 <cwicks> Correct, when I fill out the export request it asks for a business name
Jul 10 16:40:06 <prpplague> jkridner: for my guys i'll give circuitco address and we will reship it
Jul 10 16:40:15 <jj2baile> ka6sox: Actually, I may be able to use a business address at the university. Although im not sure if that would be less or more trouble
Jul 10 16:40:25 <Tartarus> jkridner, cwicks, yeah, I don't know of a spreadsheet with addresses :)  tom.rini@gmail.com for the invite pls, thanks!
Jul 10 16:40:26 <ZubairLK> For reference.
Jul 10 16:40:29 <ds2> cwicks; so that is just for international folks... domestic doesn't matter then?
Jul 10 16:40:30 <ZubairLK> "Name: Z.L. KAKAKHEL
Jul 10 16:40:32 <cwicks> university name is business name is okay
Jul 10 16:40:32 <ZubairLK> Address Line 1: 359d School of Electronic and Electrical Engineering
Jul 10 16:40:34 <ZubairLK> Address Line 2: University of Leeds
Jul 10 16:40:36 <ZubairLK> Street: Woodhouse Lane
Jul 10 16:40:38 <ZubairLK> City: Leeds
Jul 10 16:40:40 <ZubairLK> State: West Yorkshire
Jul 10 16:40:42 <ZubairLK> Country: United Kingdom
Jul 10 16:40:43 <jkridner> Tartarus: added.
Jul 10 16:40:44 <ZubairLK> Postal code: LS2 9JT
Jul 10 16:40:46 <ZubairLK> Email : EL12ZLK@LEEDS.AC.UK
Jul 10 16:40:48 <ZubairLK> Phone: +44 (0) 7784337875"
Jul 10 16:40:55 <cwicks> for domestic i prefer business address, if at all possible
Jul 10 16:41:09 <_av500_> what if I live under a bridge?
Jul 10 16:41:33 <ds2> _av500_: use the troll guild forwarders? :D
Jul 10 16:41:35 <jkridner> ZubairLK: spreadsheet info matches (as I already used it to send you hardware once :) )
Jul 10 16:42:23 <beng-nl> link to spreadsheet, anyone?
Jul 10 16:42:25 <ka6sox> cwicks, jon, brad, pantelis, hunyae, and I are all good.
Jul 10 16:42:34 <jj2baile> Woah. UK postal codes are similar canadian ones
Jul 10 16:43:02 <ZubairLK> jkridner: Add a column for sizes just in case. XL for me  ;)
Jul 10 16:43:02 <ka6sox> jj2baile, modeled after Royal Post ya know eh
Jul 10 16:43:15 <jkridner> ZubairLK: ;-)
Jul 10 16:43:39 <jkridner> cwicks: do you know who to follow up with if everything isn't complete?
Jul 10 16:43:45 <tcort> beng-nl: maybe this one? I found this in the chat logs https://docs.google.com/spreadsheet/ccc?key=0AtD7XdBlve3HdFRaU1NEZE40cUgxNFlYTEdjNklYcEE&usp=sharing
Jul 10 16:43:50 <beng-nl> tcort: trying
Jul 10 16:44:15 * jkridner guesses it is OK to add a few more viewers
Jul 10 16:44:50 * jkridner needs google account addresses to add viewers and requests no abuse of info.
Jul 10 16:45:15 * jkridner won't make addresses 100% visible.
Jul 10 16:45:21 <jkridner> ie, not public
Jul 10 16:45:43 * jkridner feels a bit bad for starting t-shirt rumor.
Jul 10 16:46:03 <beng-nl> :)
Jul 10 16:46:23 <ZubairLK> *zip. no more.*
Jul 10 16:46:25 <jkridner> ka6sox: response to PM: can't hurt.
Jul 10 16:46:32 <ka6sox> :)
Jul 10 16:46:40 <vvu> so request access to spreadsheet ?
Jul 10 16:46:47 * jkridner *really* doesn't know there is any t-shirts.
Jul 10 16:47:02 <jkridner> vvu: if you want to see the spreadsheet, provide google account info here.
Jul 10 16:47:18 <jkridner> cwicks: haven't heard back if you know who to contact if info in sheet isn't complete.
Jul 10 16:47:19 <jkridner> cwicks, all: if no one has other topics, I'd like to conclude the official portion of this meeting.  anujdeshpande, hatguy and prpplague: I will be jumping on #userspace-arduino with a couple of queries.
Jul 10 16:47:20 <vvu> just if t-shirt size is needed, otherwise neah
Jul 10 16:47:37 <hatguy> jkridner, sure
Jul 10 16:47:39 <ZubairLK> *whispers to all students to start pinging jkridner for BB.org t-shirts instead :p*
Jul 10 16:47:49 <cwicks> jkridner - don't feel bad - there will be t-shirts if i can get them - even if I have to DIY - the question is if i can get them out the door since TI doen't have expoert licensing for non chip/board stuff
Jul 10 16:47:58 <_av500_> oh
Jul 10 16:47:59 <cwicks> yes please add t-shirt sizes.
Jul 10 16:48:12 <jkridner> _av500_: ?
Jul 10 16:48:16 <ka6sox> vvu, what size?
Jul 10 16:48:17 <ds2> jkridner: there should be T's, just donno who it'll be from...
Jul 10 16:48:29 <ds2> IIRC, Google does a GSoC T
Jul 10 16:48:31 <ka6sox> ds2, same quesiton
Jul 10 16:48:33 <ZubairLK> *pesky laws..*
Jul 10 16:48:35 <cwicks> I will talk w/ CCo about help w/ the T's and shipping.  they are nice folk over there
Jul 10 16:48:40 <ZubairLK> yes google does.
Jul 10 16:48:43 <vvu> ka6sox: XL to be sure it fits :)
Jul 10 16:48:59 <ZubairLK> jkridner: zubair.lutfullah@gmail.com
Jul 10 16:49:00 * jkridner winks at expected-to-be-frustrated prpplague
Jul 10 16:49:07 <cwicks> Correct - GSOC will eventually need everyeone's T shirt size I think
Jul 10 16:49:17 <vvu> jkridner: ungureanuvladvictor@gmail.com for spreadsheet
Jul 10 16:49:20 <cwicks> I'll read carol's emails on that
Jul 10 16:49:26 <tcort>  jkridner linuxgeek@gmail.com
Jul 10 16:49:30 <ZubairLK> cwicks: they are in the melange applications..
Jul 10 16:49:41 <ZubairLK> sizes
Jul 10 16:49:43 <cwicks> excellent
Jul 10 16:50:22 * jkridner provides comment access to vvu, tcort and ZubairLK
Jul 10 16:51:05 * jkridner heads to #userspace-arduino
Jul 10 16:51:08 * jkridner sounds gavel.
Jul 10 16:51:17 * beng-nl nods solemnly
Jul 10 16:51:26 <ZubairLK> :)
Jul 10 16:51:27 <ka6sox> All Rise
Jul 10 16:51:43 <cwicks> tcort: that is the correct location of the google doc.  i think all mentors have access to it.
Jul 10 16:52:34 * beng-nl doesn't but has asked for it through the interface
Jul 10 16:53:09 <beng-nl> cwicks: i requested access as  ben.gras.nl@gmail.com
Jul 10 16:54:09 <jkridner> cwicks: all primary mentors, but I've added several secondary mentors now.
Jul 10 16:54:21 <beng-nl> YES thanks
Jul 10 16:54:22 <_av500_> ok
Jul 10 16:54:26 <ka6sox> ds2, what size?
Jul 10 16:54:35 <jkridner> ie., responsible for mentoring, but not the ones necessarily filling in the pass/fail report.
Jul 10 16:56:21 * ka6sox guesses Large
Jul 10 16:56:21 <ds2> XL is good
Jul 10 16:56:27 <ka6sox> okay changing
Jul 10 16:56:34 <ds2> L should work if there is no shrinkage
Jul 10 16:57:03 <ka6sox> done
Jul 10 16:57:11 <ds2> thanks.
Jul 10 16:57:29 <ka6sox> only bradfa left
Jul 10 16:58:53 <ZubairLK> *pings jkridner to wrap up formal meeting*
Jul 10 16:59:03 <beng-nl> ZubairLK: gavel is down
Jul 10 16:59:18 <ZubairLK> gavel? :s
Jul 10 16:59:34 <beng-nl> officialized hammer to open/close proceedings :)
Jul 10 16:59:47 <jkridner> ZubairLK: yeah, the gavel was meant to be the end of the meeting.
Jul 10 17:00:04 <ZubairLK> oops. sorry.
Jul 10 17:00:09 <ZubairLK> :)
Jul 10 17:01:38 * vvu needs to get his things in order to continue hacking into the magic world of beagle
Jul 10 17:02:40 <cwicks> okay bye bye!
Jul 10 17:02:46 <cwicks> happy coding!!!!
Jul 10 17:02:55 <_av500_> bye cwicks
Jul 10 17:02:57 <ZubairLK> bye :)
Jul 10 19:18:03 <bradfa> jkridner, ka6sox, sorry I missed the meeting today, ended up having an earlier than planned appointment
Jul 10 19:18:28 <bradfa> just getting back to the office now
Jul 10 19:18:34 <bradfa> I have no internet at home till Friday
Jul 10 19:19:11 <bradfa> large T-shirt if I'm allowed to have one, please
Jul 10 20:27:09 <_av500_> bradfa: update the google doc
Jul 10 20:27:12 <_av500_> for the shirt
Jul 10 20:27:15 <_av500_> large, blurry one
Jul 10 20:28:36 <bradfa> ok, will do _av500_ thanks
Jul 10 20:30:03 <bradfa> I requested access, apparently I didn't have it
Jul 10 23:40:10 <jj2baile> q
Jul 10 23:55:04 * vvu gives some coffee to who is awake
Jul 11 00:08:17 <ds2> why not pure caffine
Jul 11 00:11:07 <vvu> ds2: mhmh, pure caffeine in disguise
Jul 11 00:11:53 <vvu> ds2: also got android to talk with BBB, at this point through echoing in serial device and cat at the other end.
Jul 11 00:12:02 <vvu> 2morrow will do some java thingie
Jul 11 00:30:46 <ds2> Oh my java
Jul 11 00:36:51 <vvu> still need to find a way how to interpret the command received on the BBB
Jul 11 00:37:08 <vvu> *a nice way*
**** ENDING LOGGING AT Thu Jul 11 02:59:58 2013