**** BEGIN LOGGING AT Wed Aug 13 02:59:58 2014
Aug 13 07:25:03 <vvu> exit
Aug 13 12:27:46 <Abhishek_> gm jkridner
Aug 13 14:15:56 <vvu> jkridner: any more luck with the codeless kext ?
Aug 13 14:44:41 <jkridner> vvu: stopped messing with the kext since I was able to unload the driver and make a connection....
Aug 13 14:44:43 <jkridner> was focused on trying to see about the IN packets instead....
Aug 13 14:44:45 <jkridner> however, my bus analyzer doesn't seem to be working in the TI loaner laptop I have.
Aug 13 14:49:37 <vvu> ah:(
Aug 13 14:50:11 <vvu> it is described in the TRM how thr in paxkets are sent
Aug 13 14:53:31 <vvu> jkridner: 5 tries for usb boot, first IN packet then timeout 4s and doubling each time
Aug 13 14:54:23 <Abhishek_> jkridner: are we expected to post on the status thread for this week as well?
Aug 13 14:56:48 <vvu> jkridner: 26.1.8.4.2 in the TRM
Aug 13 15:50:14 <Abhishek_> hi all
Aug 13 15:51:44 <vvu> hello!
Aug 13 15:52:25 <_av500_> rhlo
Aug 13 15:52:26 <_av500_> ehlo
Aug 13 15:54:40 <Abhishek_> AUTH
Aug 13 15:56:31 <VoltVisionSteve> Hello all!  I have been spending lots of time lately learning Altium Designer!
Aug 13 15:58:46 <rseethamraju> VoltVisionSteve: I finished the example but I wasn’t able to take a video. but I’ll do it tomorrow
Aug 13 15:59:31 <Abhishek_> I'll be uploading a final video report this weekend
Aug 13 15:59:53 <rseethamraju> Diegotc: so I’m done with my example. I should make a tutorial?
Aug 13 16:00:29 <VoltVisionSteve> rseethamraju, did you try Screenflow or Camtasia Studio for your screencasting?  Maybe someone around here has recommendations for Screencasting software?
Aug 13 16:00:43 <rseethamraju> nope
Aug 13 16:00:58 <Abhishek_> For Linux, there's SSR and recordmydesktop
Aug 13 16:01:24 <joel_> vokoscreen for linux is pretty good
Aug 13 16:01:44 <Diegotc> rseethamraju: yes!
Aug 13 16:01:47 <rseethamraju> I’ll try tomorrow. I worked it out at home. Haven’t been to college yet. I need help with taking the video.
Aug 13 16:01:54 <VoltVisionSteve> both Screenflow and Camtasia Studio are expensive and have limited trial versions, so other solutions are appreciated thanks!  We will check them out!
Aug 13 16:02:25 <rseethamraju> VoltVisionSteve: I need it only for 2 days max so that’s fine
Aug 13 16:02:44 <rseethamraju> either way college should hae paid versions of something =)
Aug 13 16:02:57 <rseethamraju> Diegotc: so how do I make it?
Aug 13 16:03:57 <Diegotc> rseethamraju: sorry I thought you have the link: http://diegotc.github.io/bone101/Support/GSOC/views/index.html
Aug 13 16:04:22 <VoltVisionSteve> thx for the suggestions joel_ and Abhishek_ !
Aug 13 16:04:31 <joel_> np
Aug 13 16:04:39 <jkridner> hi all
Aug 13 16:04:44 <Abhishek_> Hi
Aug 13 16:04:44 <jkridner> thanks for joining joel_
Aug 13 16:04:53 <vvu> hello there !
Aug 13 16:05:07 <jkridner> Abhishek_, karki, praveendath92, rseethamraju, Diegotc all here?
Aug 13 16:05:17 <jkridner> no Victor?
Aug 13 16:05:25 <Diegotc> Yes
Aug 13 16:05:31 <joel_> jkridner: np just tuning in
Aug 13 16:05:34 <rseethamraju> Diegotc: I have that. So how do I make a new card/tutorial?
Aug 13 16:05:39 <rseethamraju> jkridner: yes
Aug 13 16:05:54 <ds2> hmmmm
Aug 13 16:06:10 <Diegotc> rseethamraju: need to login, and the create option will appear
Aug 13 16:06:20 <rseethamraju> oh right!
Aug 13 16:07:29 <_av500_> hello jkridner
Aug 13 16:07:34 <Diegotc> jkridner: we need to present reports?
Aug 13 16:07:36 <jkridner> hi _av500_
Aug 13 16:07:57 <jkridner> we should have final coding reports via e-mail.
Aug 13 16:08:18 <jkridner> I am looking for confirmation that coding has completed for all projects and documentation is wrapping up soon.
Aug 13 16:08:41 <jkridner> I'm hopeful that some already have the final presentation videos done.
Aug 13 16:09:01 <rseethamraju> jkridner: by the end of this weekend
Aug 13 16:10:23 <jkridner> rseethamraju: the video?
Aug 13 16:10:32 <jkridner> rseethamraju: are you still coding?
Aug 13 16:10:32 <rseethamraju> yes
Aug 13 16:10:37 <rseethamraju> no done
Aug 13 16:10:56 <rseethamraju> I have 3 wiki pages to do and video
Aug 13 16:11:23 <jkridner> Diegotc: thanks for the status report. is autosave message the last coding to be done? will it be completed today?
Aug 13 16:11:40 <Diegotc> jkridner: autosaving works
Aug 13 16:11:49 <Diegotc> only it doesn;t tell user its saving
Aug 13 16:12:11 <Diegotc> I'm working on adding an alert when the scrollbar appears
Aug 13 16:12:24 <jkridner> karki: have you tried your instructions out-of-the box with a particular Debian image? Can you document what image you use for your instructions?
Aug 13 16:12:30 <Diegotc> that way we don;t get tutorials like the one VoltVisionSteve show on the email
Aug 13 16:14:16 <jkridner> Abhishek_: thank you for the report.
Aug 13 16:15:11 <Diegotc> jkridner: I can hel Abhishek_ with his issue for connecting
Aug 13 16:15:23 <Diegotc> I'm 99% is the sameone I got the first time
Aug 13 16:15:32 <karki__> jkridner : yeah, I never modified the image in the first place
Aug 13 16:15:35 <karki__> everything works out of the box
Aug 13 16:15:35 <karki__> though I have to send kernel patches upstream now
Aug 13 16:15:36 <karki__> report today too....... hmm
Aug 13 16:15:36 <jkridner> Abhishek_: you are still debugging? are you aligned with mentors on what can be done to wrap-up and document your code? we want to be sure what you created is reusable/maintainable, even if not perfect.
Aug 13 16:15:44 <karki__> jkridner : yeah, I never modified the image in the first place
Aug 13 16:15:54 <karki__> everything works out of the box
Aug 13 16:16:09 <jkridner> karki__: k, be sure to specify which version still as future versions might break it.
Aug 13 16:17:43 <jkridner> rseethamraju: thank you for the report
Aug 13 16:19:09 <jkridner> Abhishek_: ?
Aug 13 16:19:19 <Abhishek_> jkridner: Things are ok, I just need to package the systemd component in the repo and write a page for the web interface.
Aug 13 16:21:21 <jkridner> Abhishek_: are mranostay and ds2 comfortable you are wrapping up in good condition, since we are past the pencils down date?
Aug 13 16:21:34 <jkridner> Evaluations start next week.
Aug 13 16:22:06 <jkridner> Documentation and final project video are important in my view for the evaluations.
Aug 13 16:22:17 <ds2> *nod*
Aug 13 16:22:20 <jkridner> _av500_: anything to add/change to that comment?
Aug 13 16:22:28 <jkridner> ds2: thanks.
Aug 13 16:22:35 <_av500_> yes
Aug 13 16:22:44 <ds2> jkridner: but mranostay is filling out the report :D
Aug 13 16:22:54 <_av500_> ds2: he is young and needs to money
Aug 13 16:22:57 <_av500_> the*
Aug 13 16:23:14 <jkridner> I must be doing it wrong if no one offered to bribe me. :-)
Aug 13 16:23:22 <_av500_> not?
Aug 13 16:23:25 <_av500_> :)
Aug 13 16:24:11 <vvu> jkridner: don't give people ideas
Aug 13 16:24:11 * jkridner reads rseethamraju's report
Aug 13 16:24:27 <jkridner> vvu, _av500_: just kidding!!!
Aug 13 16:24:31 * Diegotc searching what bribe means
Aug 13 16:24:57 <jkridner> lol, that must be why.
Aug 13 16:24:57 <ds2> jkridner: is there a reliable and cheap source for just those jumpers for the plug in bread boards?
Aug 13 16:25:21 <_av500_> PUB boards?
Aug 13 16:25:24 <jkridner> ds2: jumpers == wires?
Aug 13 16:25:33 <rseethamraju> jkridner: I also have to make a tutorial in Diegotc’s project for the security cam example
Aug 13 16:25:41 <ds2> jkrinder: yes, but nicely tinned
Aug 13 16:25:42 <jkridner> or you talking about the Pololu things I use to fix the wire locations?
Aug 13 16:25:49 <Diegotc> :o jkridner I thought only latin american people joke about that LOL
Aug 13 16:26:25 <ds2> trying to figure out the incremental cost for hw experiments using the logic analyzer
Aug 13 16:26:42 <Abhishek_> jkridner: will be done by this Friday.
Aug 13 16:27:22 <jkridner> ds2: yeah, there are a bunch of cheaper things like these (http://www.pololu.com/category/29/jumper-wire-kits), but I really like these: http://www.pololu.com/category/70/crimp-connector-housings
Aug 13 16:27:36 * vvu hates the Germany weather right now...
Aug 13 16:27:47 <jkridner> with those housings, you can use male or female of these: http://www.pololu.com/category/71/wires-with-pre-crimped-terminals
Aug 13 16:28:10 <jkridner> which means you can quickly disconnect/reconnect wires into the same places on the breadboards.
Aug 13 16:28:37 <jkridner> not cheap though. :(
Aug 13 16:29:04 <jkridner> rseethamraju: you still working on that 13 second delay?
Aug 13 16:29:14 <ds2> item 1810 isn't bad
Aug 13 16:29:23 <rseethamraju> I don’t know how to fix it
Aug 13 16:29:48 <ds2> jkridner: there's got to be a cheaper source. I have seen them in bags, given away as part of a low cost dev board.
Aug 13 16:30:02 <rseethamraju> jkridner: There’s only a 2 s delay with the command line pipeline
Aug 13 16:30:06 <_av500_> vvu: that bad?
Aug 13 16:30:24 <_av500_> jkridner: vvu: i will prod praveendath92 to produce a final video
Aug 13 16:30:27 <jkridner> $0.25/cable is still a bit expensive, but I think they are worth it in conjunction with the housings.
Aug 13 16:30:43 <rseethamraju> jkridner: I built it in python and 13 s lag so =(
Aug 13 16:30:44 <vvu> _av500_: raining the last 4 days in munich...
Aug 13 16:30:48 <ds2> I do wonder if "See SPI run." will qualify as a parody or will that title name get sued out of existance
Aug 13 16:31:08 <Abhishek_> ds2: I used an IDC right angled connector on the inputs, and then the usual female jumpers
Aug 13 16:31:22 <ds2> having broken off enough ends of wires in a wireless breadboard, $0.25 saves a lot of aggrevation
Aug 13 16:31:37 <jkridner> ds2: might check with prpplague as they buy them for their breadboard kits.
Aug 13 16:31:46 <ds2> Abhishek_: you know some things about hw...thinking of the cheapest/simpliest way of doing it
Aug 13 16:31:53 <jkridner> _av500_: thanks.
Aug 13 16:32:34 <jkridner> _av500_: should we meet next week w/o students to go over evaluations?
Aug 13 16:32:55 <_av500_> I would say so
Aug 13 16:33:12 <_av500_> pls send an email invite, I am on spotty wifi
Aug 13 16:33:21 <_av500_> so I miss some irc
Aug 13 16:33:27 <jkridner> _av500_: same time with this being the lobby and #beagle-mentors being the meeting room?
Aug 13 16:33:32 <_av500_> yup
Aug 13 16:33:37 <_av500_> works for me
Aug 13 16:34:17 * vvu +1s date/time
Aug 13 16:34:52 <jkridner> rseethamraju: are you able to wrap up documentation cleanly? I wouldn't want to see documentation/packaging/presentation suffer because of a stubborn non-critical bug (though not sure if it is too critical).
Aug 13 16:37:40 <rseethamraju> jkridner: I have no idea how to fix it. alexanderhiam said its ok for a initial version. So I’m leavng that. I’ve done doc strings for everything. I have to copy those into wiki pages and add extra stuff like links.
Aug 13 16:37:52 <jkridner> _av500_, vvu, ds2: sent e-mail. let me know if it is missing required info.
Aug 13 16:38:03 <jkridner> oh, I guess I forgot to forward directly to mentor inboxes.
Aug 13 16:38:39 <rseethamraju> jkridner: I snapshot works with a 3-4s delay
Aug 13 16:39:04 <ds2> k
Aug 13 16:39:50 <jkridner> rseethamraju: k, just want to make sure you are able to make a clean release. I'm looking forward to having videos for promoting all of great work you've done!
Aug 13 16:40:08 <jkridner> any other business?
Aug 13 16:40:19 <Diegotc> jkridner:  can I do two versions of the video? Spanish/English
Aug 13 16:40:26 <jkridner> Diegotc: absolutely!
Aug 13 16:40:37 <Diegotc> jkridner: that way beagleboard.org goes spanish also
Aug 13 16:40:39 <rseethamraju> jkridner: I’m putting all if it togther in the final presentation
Aug 13 16:40:42 <rseethamraju> video
Aug 13 16:41:13 <ds2> any our students going to the reunion thingie?
Aug 13 16:41:18 <jkridner> Diegotc: I'd be happy to do whatever to promote more videos in Spanish, not just for GSoC?
Aug 13 16:41:22 * jkridner didn't mean ?
Aug 13 16:41:39 <jkridner> ds2: vvu, _av500_ and I are going. not aware of any others.
Aug 13 16:41:45 * jkridner won the "lottery" thing
Aug 13 16:41:50 <rseethamraju> jkridner: how long should the video be?
Aug 13 16:41:58 <jkridner> ds2: did you enter the lottery?
Aug 13 16:42:07 <jkridner> rseethamraju: 5-10 minutes.
Aug 13 16:42:13 <ds2> jkridner: I mean specificially students
Aug 13 16:42:13 <Diegotc> Ok will work on it :)
Aug 13 16:42:31 <ds2> jkridner: no... no time :(
Aug 13 16:42:33 <jkridner> ds2: were students specifically invited that hadn't previously participated?
Aug 13 16:42:52 <jkridner> vvu was at least a student last year.
Aug 13 16:43:27 <ds2> jkridner: well, this year was suppose to be a - anyone associated with GSoC at any time event
Aug 13 16:43:41 <ds2> but those don't get paid to travel
Aug 13 16:44:59 <vvu> it goes skyhigh at least from germany to US and hotel there
Aug 13 16:45:33 <vvu> jkridner: to which email did u send the invite ?
Aug 13 16:45:35 <jkridner> are we covered on that topic? any others?
Aug 13 16:45:48 * vvu did not receive anything
Aug 13 16:46:19 <jkridner> vvu: did you fill out that form?
Aug 13 16:46:29 <vvu> jkridner: for the summit, yes
Aug 13 16:46:48 <vvu> any other magical forms that I are well hidden ?
Aug 13 16:47:24 <jkridner> vvu: contact that ospoteam address to confirm.
Aug 13 16:47:38 <vvu> jkridner: will shoot an email now
Aug 13 16:48:56 * jkridner raises gavel on the last full-team meeting and starts thinking about how to get everybody back together again
Aug 13 16:49:22 <jkridner> *slam*
Aug 13 16:49:33 <jkridner> don't be strangers!
Aug 13 16:49:44 <jkridner> stick around!
Aug 13 16:49:49 <vvu> true that!
Aug 13 16:50:02 <Diegotc> jkridner: we don't have meeting this wednesday?
Aug 13 16:50:23 <mranostay> melange is so stupid. be nice to start the eval before the window. aka write it up :)
Aug 13 16:50:32 <jkridner> mentors only
Aug 13 16:50:48 <Diegotc> Ok
Aug 13 16:51:27 <jkridner> Diegotc: evaluations start Monday, so there shouldn't be any opportunity for other updates.... this is it.
Aug 13 16:51:42 <vvu> jkridner: _av500_ mailed the ospteam and cc'ed all of you just for the sake of it :)
Aug 13 16:53:43 <VoltVisionSteve> rseethamraju, can you and I do a quick skype?  Thx!
Aug 13 16:54:20 <Diegotc> Ok, thanks jkridner
Aug 13 16:59:39 <vmayoral|pc> hi everyone
Aug 13 17:00:10 <vvu> hello vmayoral|pc
Aug 13 17:05:28 <vmayoral|pc> jkridner: sent the final report and the final video link
Aug 13 17:05:41 <vmayoral|pc> will do the evaluation next week and remind it to tridge
Aug 13 17:06:08 <rseethamraju> VoltVisionSteve: ok
Aug 13 17:14:05 <vmayoral|pc> back over here
Aug 13 17:14:07 <vmayoral|pc> did i miss something?
Aug 13 17:45:04 <mranostay> not really
Aug 13 22:07:10 <Abhishek_> jkridner|work: Let me know when you try out the web interface of BeagleLogic .
**** ENDING LOGGING AT Thu Aug 14 02:59:59 2014