**** BEGIN LOGGING AT Sat Mar 04 03:00:01 2017 Mar 04 09:12:55 siddas27: You probably did not correctly set the PATH variable to look up for the directory containing the toolchain, that's why you're getting an error of command not found Mar 04 09:19:26 Is there any difference between the embedian and the angstrom cross compilers ? Mar 04 09:19:50 Can someone help here ? Mar 04 09:23:21 Not sure but I think yes. Mar 04 09:23:21 Embedian is based on Debian, while angstrom is not (IIRC). Mar 04 09:26:40 Why not just use the cross compiling toolchain from linaro. Mar 04 09:27:16 BTW OS might not make much of a difference so those cross-compilers might be same. Mar 04 09:32:24 GCC version is more important than vendor Mar 04 09:32:52 I also recommend linaro toolchain Mar 04 09:34:26 Thanks Mar 04 12:38:10 Jkridner there?? Mar 04 15:30:13 Hello! Mar 04 15:30:39 I have been trying to boot my own kernel onto BBB. Mar 04 15:31:13 and have had a hard time trying to do so. Mar 04 15:31:44 I have partitioned a memory card Mar 04 15:31:57 into 2 parts Mar 04 15:32:19 one is called BOOT and the other, I have labeled to RFS Mar 04 15:33:42 and I have copied MLO , u-boot.img uImage, am335x-boneblack.dtb and uEnv.txt Mar 04 15:33:52 into the BOOT partition Mar 04 15:34:16 and a root file system into RFS. Mar 04 15:35:31 I want to debug the booting here so I have connected a USB-TTL3V3 to my PC Mar 04 15:35:55 (I am using ubuntu 14.04) Mar 04 15:36:44 Whenever I try to boot by holding S2 switch, there is no LED flashing :( Mar 04 15:37:11 and the minicom console comes up with nothing. Mar 04 15:37:38 Absolutely nothing. Not even something garbled. Mar 04 15:38:30 I have fixed baud rate to 115200. Mar 04 15:38:54 I don't understand what I am missing. Mar 04 15:39:07 I request the devs to please help me with this. Mar 04 15:50:57 tokencolour: did you format boot parition to FAT16? Mar 04 15:51:25 I formatted it to FAT32 Mar 04 15:51:40 would that be the problem? Mar 04 15:51:53 possibly Mar 04 15:52:13 oh Mar 04 15:52:14 I remember I had to format mine to FAT16 in order to boot Mar 04 15:53:19 maciejjo: have you documented somewhere what you did (or do you know of a reference)? Mar 04 15:53:52 There are so many steps here and I could have gone wrong a lot of times Mar 04 15:54:27 I'll format the boot partition to FAT16, and try again. Mar 04 15:55:52 I followed this guide: http://www.armhf.com/boards/beaglebone-black/bbb-sd-install/ Mar 04 15:57:35 Thank you! Mar 04 15:57:47 I'll look into it. Mar 04 16:36:08 Hi, I recently changed a few things on my resolv.conf. Now, I'm not able to SSH into my BBB. Any particular solution for the same ? Mar 04 17:05:51 ServerProcessor: resolv.conf ? thats just to get the DNS ? sure that is the problem and nothing else ? Mar 04 17:29:53 Hey can anyone help I need advice on GSoC.How to join it and what requiremnts should I fullfill Mar 04 17:43:15 hi, first step is to find ideas list Mar 04 17:43:54 i can help you, check it out: http://elinux.org/BeagleBoard/GSoC/Ideas Mar 04 17:44:47 Read this and then ask questions Mar 04 17:46:48 So how do you propose an idea Mar 04 17:48:17 meaning if you have an idea who do you propose it to ? Mar 04 17:51:17 you need to contact with mentor Mar 04 17:52:10 under each project is written, who is responsible for it Mar 04 19:18:29 Flappyshabeer, if you have an idea of your own, asking here is a good start. People may point you at a suitable mentor. Mar 04 19:18:58 Own ideas may be acceptable depending on what they are! Mar 04 19:27:16 hello , i am interested in the "GPU OFFLOAD".can anyone please guide me or atleast suggest resources so that i can start exploring it Mar 04 19:46:17 1 Mar 04 19:48:18 ? Mar 04 19:55:46 sorry, accident :p Mar 04 20:24:06 ravikp7 did you ping? **** ENDING LOGGING AT Sun Mar 05 03:00:01 2017