**** BEGIN LOGGING AT Mon Jan 30 02:59:59 2012 Jan 30 04:39:32 does use of gles on the 3530 require additional licensing? Jan 30 06:08:39 ahaaa CONFIG_TOUCHSCREEN_TI_TSCADC Jan 30 06:08:47 beaglebone ADC support Jan 30 06:09:42 Its provided as a touch screen controller input device driver, might need some hacking to make it into a general purpose ADC facility, but this is a great start. Jan 30 06:28:22 you are wrong Jan 30 06:28:54 your first attempt AIN0-6 readed more likely Jan 30 06:30:37 just have a look at the srm where those are on the extension header Jan 30 06:31:19 page 53 Jan 30 06:32:49 that touchscreen adc is unrelated Jan 30 06:38:23 the touchscreen ADC is the exact same ADC Jan 30 08:04:03 koen: https://gitorious.org/lima Jan 30 08:05:18 heh, Luc Jan 30 08:05:24 looks like he got tired of Via Jan 30 08:05:41 but still, nice to see someone actually started that project Jan 30 08:07:16 and even better: someone with a clue Jan 30 08:10:57 ah, that's probably the one announced for FOSDEM Jan 30 08:12:08 * dm8tbr is looking forward to this. went through major pains with STE because of mali on the snowball soc... Jan 30 08:48:10 hm, there are docs for that Mali GPU? Jan 30 08:49:28 has that ever stopped anybody? Jan 30 08:49:51 nope, just asking Jan 30 08:50:18 SGX is on the market for some time now Jan 30 08:50:33 and still that binary blobs Jan 30 08:50:37 :) Jan 30 08:51:00 ynezz: when all people do is lament, what do you expect? Jan 30 08:51:25 I know almost nothing about Mali, so I wonder how it's different compared to SGX, that there's open source driver project announced Jan 30 08:51:29 that's all about it Jan 30 08:53:51 AIUI mali isn't tile based Jan 30 08:53:59 and that's where my knowledge of it stops Jan 30 08:54:21 koen: still, a nice way to start a conversation at cocktail parties... Jan 30 08:54:31 :) Jan 30 10:10:23 av500: I made the mistake of saying "rpm4 or rpm5" to get people to walk away Jan 30 10:10:40 av500: turns out the drunk norwegian guy was one of the rpm5 people Jan 30 10:37:26 koen, can we shunt a bit of narcissus traffic to europe this morning? Jan 30 10:38:31 intertubes are a overflowing? Jan 30 10:38:49 no, I have to consolidate about a TB of data Jan 30 10:39:11 the disks are being pounded Jan 30 10:39:11 megaupload it.... Jan 30 10:39:47 4.2million files and counting. Jan 30 10:41:27 mali is getting an opensource driver? Jan 30 10:41:29 sweet Jan 30 11:06:03 ka6sox: sure Jan 30 11:16:21 builders are messy...6.5million files so far. Jan 30 11:18:25 ka6sox: it now diverts to europe when loads goes about 3 (instead of 4) Jan 30 11:18:35 koen, thanks Jan 30 11:18:49 the poor disks are being hammered. Jan 30 11:19:23 I need to do this as I need to recover 800GB of space Jan 30 11:19:24 ka6sox: you can tweak it in /var/www/narcissus/scripts/htaccess.sh Jan 30 11:19:39 thanks, I'll write that one down. Jan 30 11:31:47 hm, how does this htaccess.sh thingie works? Jan 30 11:32:01 it's kind of a cron job looking for a load? Jan 30 11:32:14 haven't read it yet... Jan 30 11:32:24 but its helping me out... Jan 30 11:32:31 :) Jan 30 11:32:36 7.5million files to move around Jan 30 11:32:40 (so far) Jan 30 11:33:12 * av500 think he knows where megaupload hid the important files.... Jan 30 11:34:20 its all the build state stuff for this: http://ipkg.nslu2-linux.org/feeds/optware/ << each one as a minimum of 2 feeds under it and 3500 or so packages/feed Jan 30 11:48:13 well, if you need good cover for your gross traffic, then setup Angstrom/OE mirror :) Jan 30 11:48:23 dotcom knew it! Jan 30 11:48:45 err, dotkoen Jan 30 11:58:42 koen: mali is tile based Jan 30 11:59:25 a question: while there are gstreamer and gstreamer-base-plugin packages exist in repository, why gstreamer-good-plugin package is not exists? Jan 30 11:59:38 ynezz, ya, I know...Narcissus is good for that too :D Jan 30 12:00:01 mru: ah, I knew I shouldn't have believed that raspberry pi propaganda Jan 30 12:00:36 ynezz: it seds htaccess to redirect if loads goes over N Jan 30 12:00:39 Hi, I need help to produce a working SD card. I'm running ubuntu. HELP! Jan 30 12:25:58 Hello, Jan 30 12:38:21 while there are gstreamer and gstreamer-base-plugin packages exist in repository, why gstreamer-good-plugin package is not exists? Jan 30 12:39:44 or while installing good plugins, ./autogen.sh says that i need automake but i allready have. ./autogen.sh results : http://pastebin.com/GBukaBay Jan 30 12:41:20 why not install the prebuilt ones? Jan 30 12:41:26 or use OE to build them? Jan 30 12:41:48 let me rephrase: why reinvent the wheel with square block? Jan 30 12:42:36 koen: i could find prebuilt ones for gstreamer and gstreamer-base-plugin Jan 30 12:42:44 but not for good plugin Jan 30 12:45:41 search better Jan 30 12:45:58 maybe there are no good plugins Jan 30 12:46:10 only bad and ugly :) Jan 30 12:46:28 which reminds me, need to fix OEcores gst-ffmpeg to link against the external libav instead of the internal one Jan 30 12:46:35 av500: actually there is.. Jan 30 12:46:41 and add gst-libav Jan 30 12:48:35 koen: i have searched base plugin with "opkg list | grep gst-plugin-base" then i found. but i even tries "opkg list | grep good" then there is result.. Jan 30 12:50:00 parana: and you haven't noticed that all the plugins in -good are packaged seperately? Like all the other plugins? Jan 30 12:51:43 koen: i can just see gstreamer and base http://www.angstrom-distribution.org/feeds/unstable/ipk/glibc/armv7a/ Jan 30 12:55:08 ok i found finally here : http://www.angstrom-distribution.org/feeds/unstable/ipk/glibc/armv7a/debug/ Jan 30 12:55:14 thx for help Jan 30 12:55:15 parana: look up the meaning of 'seperately' Jan 30 13:55:35 is it possible to find out which modules are requesting for particular clocks and what value they are set to? Jan 30 14:52:12 Anyone enabled I2C1 on the beaglebone? Jan 30 14:54:59 i2c1 or i2c2? There was an issue w/ i2c2 that's been fixed Jan 30 14:56:11 i2c1 (Yes i2c2 has been fixed and works very well for me) Jan 30 15:28:03 koen i've installed gstreamer good plugin with -dev package but it said v4l2src No such element or plugin 'v4l2src'.. Jan 30 15:28:03 When i install gst-good-plugin-dev it says: http://pastebin.com/LA2ndQj2 Jan 30 15:40:24 did i installed the true package ? I downloaded from : http://www.angstrom-distribution.org/feeds/unstable/ipk/glibc/armv7a/gstreamer/ gst-plugins-good_0.10.28-r11.1.6_armv7a.ipk and gst-plugins-good-dev_0.10.28-r11.1.6_armv7a.ipk Jan 30 15:41:14 dunno, I trust the builtin feeds Jan 30 15:42:34 so why sould i get error:/ It doesnt make any meaning.. It said package installed but then said component not found.. Jan 30 15:45:04 juhsis: read back what I said earlier today Jan 30 15:45:11 juhsis: about 'seperately' Jan 30 15:46:05 so you are trying to say, install all packages about gstreamer plugin good? Jan 30 15:46:31 apps dev doc meta static and original file Jan 30 15:48:00 koen : do you mean that ? Jan 30 15:53:02 every plugin is packaged *seperately* Jan 30 15:54:26 koen .. creates puzzles for engineers :) Jan 30 15:54:42 individually wrapped containers for freshness and hygiene. Jan 30 15:54:54 :)) Jan 30 15:56:10 i allready know every plugin is packages seperately.. there are good , bad , base , ugly and gl plugins in gstreamer.. Jan 30 15:56:39 'good' is not a plugin Jan 30 15:56:44 it's a collection of plugins Jan 30 15:56:56 i have installer gstreamer package, base plugin with base-dev and then good plugin with good-dev Jan 30 15:57:32 woauw Jan 30 15:57:47 so i need to install v4l2src component alone.. Jan 30 17:56:30 koen, it seems ike first boot is not running for me Jan 30 17:56:38 this leads to no x starting I think Jan 30 17:56:43 you have any cluese? Jan 30 18:16:57 Russ: what's cookin today? Jan 30 18:21:27 how do i access the cloud 9 IDE that comes with the beaglebone board? i can't figure out how to access it Jan 30 18:21:51 they give me the port number but its still not working completely Jan 30 18:35:34 Crofton|work: what image? Jan 30 18:35:53 koen: the distribution Jan 30 18:36:50 custom, mostly copied from xfec-systenms from angstrom Jan 30 18:40:06 try the non-custom ones first Jan 30 18:40:12 yeah Jan 30 18:40:16 thinking that Jan 30 18:48:52 hmm, -5° to -15° on friday/saturday. what a pain :/ Jan 30 18:50:46 I already see the headlines: "geeks frozen to ice in belgium" Jan 30 18:51:08 openice Jan 30 18:54:07 nah, they will all get peppersprayed while protesting ACTA Jan 30 18:54:15 lol Jan 30 18:54:33 aholler, looks like you stole our winter…we're going to be 11ish tomorrow Jan 30 18:56:49 wtf Jan 30 18:56:57 * Crofton|work better check Brussels weather Jan 30 18:57:55 hmm, I suppose I will bring the heavier jacket Jan 30 18:58:47 hopefully they will not striking at friday, I think today they have Jan 30 18:59:02 who is striking? Jan 30 18:59:19 -15°C and no public transports wouldn't be that good ;) Jan 30 18:59:26 urg Jan 30 18:59:31 how would we get around? Jan 30 19:00:05 with enough beer ;) Jan 30 19:02:28 http://www.newsday.com/news/nation/belgium-strikes-on-day-of-eu-summit-1.3489053 Jan 30 19:06:22 hopefully things calm down by Thursday Jan 30 19:07:15 and on friday the trolls arrive Jan 30 19:07:38 will they be at St Nick? Jan 30 19:08:14 are you going to Linaro Connect? Jan 30 19:09:31 yes and yes Jan 30 19:09:56 how are you getting from BRU to SFO? Jan 30 19:10:08 I will be in the bay area by Wednesday evening Jan 30 19:10:18 by airplane Jan 30 19:10:25 I am stopping at home to do laundry ... Jan 30 19:10:30 how modern Jan 30 19:31:20 non-custom works Jan 30 19:43:26 Anyone around with an SD card that gives a "timedout waiting for cmddis!" error in U-Boot? Jan 30 19:59:37 Tartarus, in u-boot v2011.12 : http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/tree/recipes-bsp/u-boot/u-boot/2011.12/0006-OMAP-MMC-Add-delay-before-waiting-for-status.patch should take care of that.. Jan 30 19:59:57 rcn-ee: Close, yes. I'm looking for others with the problem to test the proper fix Jan 30 20:00:26 Tartarus, yeah didn't recognize the name.. Yeap i actually have an sd card that does that.. the problem.. to find it again in my pile of cards... Jan 30 20:00:43 if you have a test fix, i'll look around.. Jan 30 20:01:21 rcn-ee: is that the DTO patch? Jan 30 20:01:42 no, it's u-boot, but probally related as it's the mmc driver.. Jan 30 20:01:59 ds2, only in so far as the mmc driver needs a few more kicks here and there are they related Jan 30 20:02:05 DTO is a different thing Jan 30 20:02:13 rcn-ee: sec.. Jan 30 20:02:35 not a problem, need to rebuild u-boot with out the patch first and find the card. .;) Jan 30 20:02:54 what voltage is the card run at? Jan 30 20:03:28 rcn-ee: http://pastebin.com/rp5B6eQ1 Jan 30 20:07:02 okay found the card, this is just v2011.12 http://pastebin.com/La7EwPq1 now trying with your patch.. Jan 30 20:07:17 (old sandisk 2gb) Jan 30 20:07:52 k Jan 30 20:16:44 Tartarus, no luck.. http://pastebin.com/imH0Fbsb (had to remove the am335 part, as this was just with v2011.12) Jan 30 20:17:18 hm Jan 30 20:18:04 Ah, different failure Jan 30 20:18:07 sec tho, I have an idea Jan 30 20:18:17 Tartarus, crap, hold on a second that might still be still the c4 binaries... Jan 30 20:18:29 oh, k Jan 30 20:18:30 * Tartarus waits Jan 30 20:18:44 ya, same timestamp on both logs Jan 30 20:21:32 Tartarus, there we go, looks fixed: http://pastebin.com/pf6UXRqe (helps to use the actual built u-boot files of today) Jan 30 20:27:47 yay Jan 30 20:27:53 Can you give me a tested-by line? Jan 30 20:28:44 sure: tested-by: Robert Nelson Jan 30 20:29:15 rcn-ee: do you have a bone + cape near you? Jan 30 20:29:41 thanks Jan 30 20:29:48 i only have a a2/a3 bone here, and the cape/dvi should arrive on weds according to fedex.. Jan 30 20:31:08 rcn-ee: can you give https://github.com/koenkooi/linux/tree/beaglebone-3.2 a try Jan 30 20:31:19 rcn-ee: it might not compile, I haven't tested that yet Jan 30 20:31:45 koen, will do.. I've been playing with the v3.2-staging from arago, so if it's close to that it should boot.. ;) Jan 30 20:32:00 it that + 1 patch Jan 30 20:32:16 it's* Jan 30 20:32:23 look like lcd and all the cap stuff. ;) Jan 30 20:32:36 yes Jan 30 20:32:55 once that builds & boots I'm going to hack in pwm support for the lcdcape Jan 30 20:34:03 * koen is too tired to look at the screen right now Jan 30 20:38:31 koen, good time to try that rum ;) Jan 30 20:39:12 pyrate right? ;) Jan 30 20:39:55 rcn-ee: are you there? Jan 30 20:40:08 yeap.. Jan 30 20:40:26 i wanna know how can i change the Kernel command line Jan 30 20:40:31 ? Jan 30 20:40:58 i changed my uenv.txt file but nothing happened Jan 30 20:41:16 can you pastebin your current uenv.txt file.. Jan 30 20:41:25 "uEnv.txt" file . ;) Jan 30 20:42:08 http://pastebin.com/VsmWp1i9 Jan 30 20:42:27 Kernel command line: console=ttyO2,115200n8 console=tty0 mpurate=auto buddy=none buddy2=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc Jan 30 20:43:04 omapfb.mode=dvi:640x480MR-16@60 <<-- that parameter didn't change Jan 30 20:43:43 btw im on a bb-xm Jan 30 20:43:52 tholm, couple issues on that pastebin, it looks like it work-wrapped, is the line (22-24 really 3 lines, it should be one long).. and 26-27 should be one line too.. Jan 30 20:43:55 I cannot get GPIO to work properly on a BeagleBoardXM revC running Oneiric Ubuntu. Trying to export the user button on GPIO4 results in device or resource busy. I've also tried to use GPIO168 and while I'm able to change the value, it does not change voltage on the output. Jan 30 20:44:24 sry wrapped is on Jan 30 20:44:25 use dvimode variable, not omapfb.mode Jan 30 20:45:03 tholm, also, to change the resolution, just change line 12 (dvimode=1280x720MR-16@60) Jan 30 20:45:34 is this an exapansion lcd, or just a regular lcd/dvi monitor? Jan 30 20:45:54 nope it is a lcd tv Jan 30 20:46:30 tholm he means are you using the hdmi/dvi port I think Jan 30 20:46:47 ah, yeah just leave 'defaultdisplay=dvi' as "omapdss.def_disp=lcd" does something else.. Jan 30 20:46:52 oh im using hdmi port Jan 30 20:47:15 ok ima try Jan 30 20:48:09 tholm, here's an edited version that work over the hdmi port for your lcd tv: http://pastebin.com/hX3JQxbz Jan 30 20:48:36 carefull with lines 19, 21 they can't be word wrapped.. Jan 30 20:49:23 ok Jan 30 20:51:30 Hey guys! I'm very new to beagle board. My OS is Windows 7. Should I install Ubuntu and forget about using Beagle with Windows? Jan 30 20:52:10 I think it's a bit more straightforward Jan 30 20:52:24 and more supported Jan 30 20:52:33 All the instructions and such seemed to be for linux. Jan 30 20:52:35 teemune, you can always use virtualbox/vmware/etc.. ;) Jan 30 20:53:11 I'd go with vmware player unless you're familiar with linux already Jan 30 20:53:16 Yea. I think installing linux is no problem. It's just that I'm more comfortable with Windows :D Jan 30 20:54:59 What's the benefit of using Vmware instead of actual Ubuntu install? Jan 30 20:55:10 dualboot sucks Jan 30 20:55:19 fair enough :D Jan 30 20:56:05 It's self contained, so for a first time user, it's a lot safer then tweaking your disk partitions.. Jan 30 20:56:05 I cannot get GPIO to work, can anybody offer assistance? I know how to set them up in the kernel and/or u-boot as well as from user-space. Jan 30 20:57:44 what are you trying to do with gpio? Jan 30 20:58:16 I think this Wubi-thing seems pretty safe too. It helps you install Ubuntu using windows. Jan 30 20:58:29 Vmware seems to cost something? Jan 30 20:58:45 vmware player is free, but requires registration Jan 30 20:58:47 nope, vmware player is free Jan 30 20:58:53 at this point I'm just trying to blink an LED or read a push button Jan 30 20:59:01 Wubi was nice, but last i used it, it hard a hard limit on partition size... virtualbox is also free, and it's what i use to run windows on linux.. Jan 30 20:59:11 Ok. I'll have to look into that then. Jan 30 20:59:40 virtual box isn't as goodabout capturing usb devices as vmware.. other than that it's nice Jan 30 20:59:52 The only thing I really want to do is install Android onto beagleboard Jan 30 21:00:06 and then make programs for it Jan 30 21:00:36 At first atleast that's the case. But it seems that I have to "port" it with linux. Jan 30 21:00:54 rcn-ee: works!!! Jan 30 21:01:02 Awesome tholm Jan 30 21:01:26 ima try with another resolution Jan 30 21:01:36 jno, and what are the steps you're taking? Jan 30 21:08:54 I pinmux in the kernel, and I've done so in uboot as well Jan 30 21:09:25 echo 168 > /sys/class/gpio/export Jan 30 21:10:18 echo "high" > /sys/class/gpio/gpio168/value Jan 30 21:14:08 have you tried 1/0 rather than "high"? Jan 30 21:14:47 also is direction set properly? Jan 30 21:18:53 omap gpio values are 1 / 0 yes Jan 30 21:21:03 guys gnome will work fine on bb-xm? Jan 30 21:22:00 i haven't tried gnome 3.x... usually stick with just xfce or any of the light weight wm's.. Jan 30 21:23:02 yep i think xfce is a better choice Jan 30 21:26:10 I saw a note that gpio168 is used by i2c Jan 30 21:29:20 it's not, if MUX settings are correct Jan 30 21:30:39 'k Jan 30 21:35:09 tholm: Gnome 2 is fine on the XM, Gnome 3, hmmm, I think that's a ram eating beast, as mentioned Xfce is well supported :) Jan 30 21:36:07 Question: Is any distro (outside of Angstrom) supporting a mix of ES2 and ES3 > GLES drivers for the older OMAP 3530's? (i.e. the ES2 drivers taken from an old drop and ES3> taken from the latest driver). Jan 30 21:38:06 DJWillis: but im using ubuntu oneiric and that distro install gnome 3 Jan 30 21:38:47 tholm: well it should be easy enough to backup your SD and give it a try ;) Jan 30 21:40:06 :) Jan 30 21:54:35 DJWillis: I added support for that to angstrom last week :) Jan 30 21:55:18 koen: hmmm, must have missed that, was working on just that, ok, well saves me a job ;) Danke! Jan 30 22:01:46 koen: in one unified package? Runtime switch etc.? I maybe missing something (I guess I am) but I can't see it in meta-ti Jan 30 22:09:16 hello Jan 30 22:21:58 DJWillis: just because I'm curious, why is that needed? Jan 30 22:25:05 aholler: the latest Ti GLes driver dump does not support ES2 OMAP 3530 SoC's (the driver will lock up after a few secs, known and not going to be fixed upstream as ES2 support is dropped). So distros that run on OMAP3530's that have more then one ES revision floating about (Beagle pre-XM, OpenPandora etc.) need to come up with a way to ship a hackup of the driver dumps (or some other runtime work around) ;). Jan 30 22:25:28 ah, ok. Jan 31 00:03:12 koen, I think polkit-gnome needs a DEPENDS on systemd or soemthing Jan 31 00:03:24 remind me in the am to explain what I mean **** ENDING LOGGING AT Tue Jan 31 02:59:58 2012