**** BEGIN LOGGING AT Tue Jun 19 02:59:59 2012 Jun 19 03:13:12 Hello beagleboys and girls. Jun 19 04:44:39 wtf is a beagleboy? Jun 19 04:46:06 idk Jun 19 04:46:10 a boy who owns a beagle Jun 19 04:46:17 a beagle who owns a boy? Jun 19 04:46:20 http://en.wikipedia.org/wiki/Beagle_Boys Jun 19 04:46:29 ^^ Jun 19 04:47:06 i remember them from the duck tales video game Jun 19 04:47:35 lol Jun 19 04:51:58 someone needs to lay off the pot Jun 19 04:52:38 quite the opposite, I need more and better pot Jun 19 04:54:37 but seriously, I am using the beaglebone with temperature, humidity and C02 sensors to grow better medical cannabis, log sensor stuff to db and also log feeding schedules control electrical devices Jun 19 04:55:51 If you're in the US, expect the DEA to knock down your door soon. Jun 19 04:56:36 paranoid much... no really I take care of medical patients, patients with MS, and arthritis Jun 19 04:58:10 if you had personal experience with patients with multiple sclerosis you would think cannabis a god send Jun 19 06:23:46 koen: The final hurdle moving to oe-core is the SGX (segfaults and instant-lockup). Do you suspect there will be a new binary-release anytime soon? Jun 19 06:25:52 koen: if not, I suspect maybe getting 4.03.00.02/1.6.16.3977 working is my best hope/bet/chance. Jun 19 08:43:11 can i use the libraries build for beagleboard to crosscompile qt source? i mean can i use pkconfig folder in angstrom ? Jun 19 08:44:29 stuk_gen: what libraries? i used tslib from the bone to crosscompile, you can definitely do it Jun 19 08:44:55 but you have build tslib or use tslib build with bitbake? Jun 19 08:46:01 icota: i mean i have to build the libraries that i need for the host or for the target? Jun 19 08:46:03 i was lazy and just stole it form the prebulit angstrom rootfs Jun 19 08:46:18 icota: so target... Jun 19 08:46:22 stuk_gen: yes Jun 19 08:46:33 icota: because i try export PKG_CONFIG path Jun 19 08:46:52 and force qt configure with -force-pkg-config Jun 19 08:47:00 but don't find the libraries Jun 19 08:47:31 let me check how i did it Jun 19 08:47:34 one sec Jun 19 08:49:45 icota: how's the audio doing? Jun 19 08:49:59 koen: hey! it's playing Jun 19 08:50:35 there are a lot of assumptions in the driver that go against an I2S setup Jun 19 08:51:02 so i had to dig through davinci-mcasp and davinci-pcm Jun 19 08:52:21 i'm writing the codec driver now, unfortunately we went with a national semiconductor chip Jun 19 08:53:07 * av500 prefers international semiconductors Jun 19 08:53:39 moi aussi Jun 19 08:59:21 stuk_gen: i pointed QMAKE_INCDIR and QMAKE_LIBDIR to whatever libs Qt needed Jun 19 08:59:47 icota: what? Jun 19 09:00:15 icota: no ok...its a pain that XD Jun 19 09:00:21 we had a conversation about crosscompiling Qt 10 minutes ago, i made a sandwich in the meantime Jun 19 09:01:06 icota: yes i remember...but its a little pain that...in teohry put QMAKE INCDIR and LIBDIR is the same to add PKG_CONFIG Jun 19 09:01:07 stuk_gen: it was only tslib for me, i don't know of anything more that Qt needs, pretty straightforward Jun 19 09:01:28 i need ts gstreamer oepngl dbus sql :P Jun 19 09:01:35 oh i see :) Jun 19 09:01:59 * koen justs does 'inherit qt4e' or 'inherit qt4x11' Jun 19 09:02:38 koen: the problem is qt embedded don't work in qt creator Jun 19 09:02:46 koen: so i'm try build it manually Jun 19 09:11:50 koen: fyi, libgles_omap3_4.03.00.02.bb and omap3-sgx-modules_1.6.16.3977.bb doesn't behave with the latest ti-eula-unpack.inc. it extracts to ${WORKDIR}/qY/qY... Jun 19 09:12:23 using the unpack from oe-classic makes them happy again Jun 19 09:51:36 I'm sure metro causes eye-cancer Jun 19 09:51:55 koen: candidly quoting RPJ "[yocto] why does yocto dev manual emphasize meta-intel BSP layer so much?" Jun 19 09:54:23 aholler: sure Jun 19 09:55:14 must have been developed by only gray-seeing people Jun 19 09:57:55 so the top-seller for metro-tablets would be a gray-only kindle ;) Jun 19 10:28:12 Hello, I have a power supply problem in my beaglebone Jun 19 10:28:36 the 3v3 is not present Jun 19 10:28:56 anyone know the 3v3 chip to buy another one? Jun 19 10:29:34 I bought the beaglebon in mouser, but mouser doesn't know anything about the chip Jun 19 10:54:37 hi raster Jun 19 10:55:38 moo Jun 19 10:55:54 so the BeagleBoard-XM doesn't have any 3.3V I/O in it, right? Jun 19 10:56:24 right Jun 19 10:56:34 except for the sdslot Jun 19 10:58:32 too bad there was no *bone when I bought the xm Jun 19 12:16:23 how would I best "fix" the mac address of a BeagleBoard running ArchLinux Jun 19 12:32:09 Anyone here had *any* sgx-drivers running (successfully) on Beagleboard C3? Jun 19 12:34:09 the old versions work Jun 19 12:34:22 and supposedly the new version as well, but noone has properly tested it yet Jun 19 12:34:46 koen, define "proper" ;) Jun 19 12:35:22 mdp: more than just "hey, it modprobes, ship it!" Jun 19 12:35:52 solution: lower expectations Jun 19 12:39:29 koen: I just tested the 4.06.00.01 patch from Denys' (non-X11), but the rawdemos crashed hard. Jun 19 12:39:49 so, back to the old days then :) Jun 19 12:40:03 see, lower your expectations :) Jun 19 12:40:55 yes, the good 'ol days Jun 19 12:42:29 * tasslehoff hums good old days (weird al) Jun 19 13:49:58 is the gstreamer plugin omapdmaifbsink gone in the lastest angstrom? Jun 19 13:51:32 i used the beagleboard demo (2012.05) and upgraded with opkg. I tried to install gstreamer-ti-dev (as the plugin is in this package when you compile by hand) Jun 19 14:45:35 anyone here? Jun 19 14:48:07 no Jun 19 14:48:53 :D i need some help with my BeagleBoard Rev C4 Jun 19 14:50:04 When i wanna boot, connectet to pc via Serial (only Rx and Tx) I'm only able to see kryptical Symbols on the Screen... Jun 19 14:50:21 you miss GND Jun 19 14:51:11 no, i don't, I use the power supply from my Notebook (with 1A USB-Output) Jun 19 14:52:06 if you properly connect the serial, it will work Jun 19 14:53:20 okay, i'll try it. thanks! Can I use the Test Point directly behind the RS232 Header ro connect? Jun 19 14:53:25 *to connect Jun 19 14:57:35 now it works!! Thanky!! Jun 19 14:57:38 and bye Jun 19 14:59:01 another satisfied customer Jun 19 15:28:01 is the omapdmaifbsink patch in gstreamer-ti still working ? i fixed it by hand but can't get it to work Jun 19 15:34:09 is there a way to use the library build for sysroot from a cross compile? Jun 19 15:34:31 i want use the pkfolder that i have in beagleboard sysroot Jun 19 15:34:59 but i've see this pc file is 'locale' its made for build native not cross compile Jun 19 15:35:35 have short link, example dbus.pc have /usr/lib/dbus ... not /angstrom/sysroot/blabla Jun 19 15:36:07 so i can't use this... is there another method to use pkconfig file generate from angstrom? Jun 19 15:37:53 stuk_gen: just write a recipe for it Jun 19 15:39:08 koen: i don't know how use recipe...and i repeat i'm cross compile qt embedded Jun 19 15:40:27 koen: i don't know what bitbake do..but build qt4-embedded build some package, and add package split. And remove the src build of qt that i need. Jun 19 15:41:10 koen: i remove the rm_dowork, but the libraries have some file incorrect and i can't use in qt creator Jun 19 15:41:45 koen: if you can help me for adjust this i apprecciate Jun 19 15:46:59 what make me angry is that there is something wrong...but i think is a joke for who know how their work and can solve it Jun 19 15:56:26 stuk_gen: well, angstrom uses recipes Jun 19 15:56:48 so there are a million recipes to look into and see how they do things Jun 19 15:57:05 most problems are already solved and need 1% tweaking Jun 19 15:57:13 ok, but i don't write that i want use angstrom recipe Jun 19 15:57:27 i only want use the library build from angstrom Jun 19 15:57:35 without using bitbake Jun 19 15:57:39 is possible? Jun 19 15:58:25 av500: and i've look the qt4-embedded but its a very chaos :) Jun 19 16:01:27 OPPTreatyProperCattleInterim23 Jun 19 16:02:02 can i using only do_compile() on a package from bitbake? Jun 19 16:03:03 something like bitbake package compile() Jun 19 16:05:20 bitbake package -c do_compile() ? is correct? Jun 19 16:07:39 hello Jun 19 16:08:08 I am new to Angstrom but not completly new to Embeded Linux. I am struggling with the Automated build system on the website and I thought Maybe I can get some help. I see it has the at91Sam9263EK as the target which is what the processor I am using is based on which is the AT91AM9G45-EK. I have choosen the previously mentioned target and everything seems to build except Mono. Mono-MCS does build which concerns me that Mono would not build given that mono-MCS is Jun 19 16:08:09 the Compiler. can someone provide me any direction. Jun 19 16:31:54 Ive downloaded kernel from git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git, configure with 'make ARCH=arm omap2plus_defconfig" compile and run. But it hangs after 'Uncompressing Linux... done, booting the kernel.'. Is this a known problem? Jun 19 16:47:47 is it possible to force udp over rtsp using gst rtsp server? Jun 19 16:50:00 /tmp/ccFiAoUm.s: Assembler messages: Jun 19 16:50:01 /tmp/ccFiAoUm.s:300: Error: selected processor does not support ARM mode `smc #0' Jun 19 16:50:03 /tmp/ccFiAoUm.s:338: Error: selected processor does not support ARM mode `smc #0' Jun 19 16:50:05 make[1]: *** [arch/arm/kernel/sysfs_v7.o] Błąd 1 Jun 19 16:50:07 cool Jun 19 16:50:29 is there any valid and up-to-date tutorial to build kernel for beagle? Jun 19 16:50:55 it seems that Ill port freebsd to beagle earlier ;dDD Jun 19 16:51:43 aleek: http://dominion.thruhere.net/koen/cms/beaglebone-software-docs Jun 19 16:53:00 is it valid for beagleboard-xM too?:> Jun 19 16:53:12 yes Jun 19 17:06:24 jakeday:with that wifi usb adapter did you have problems with rfkill blocking it? Jun 19 17:17:53 hello Jun 19 17:23:37 hrm Jun 19 17:24:00 so the bone has the circuitco 7" screen Jun 19 17:24:11 but circuitco doesn't make a cape with audio out? Jun 19 17:25:50 heh bone can only do PWM audio Jun 19 17:28:33 there's the dvi cape with audio out Jun 19 17:28:38 and the hdmi cape Jun 19 17:30:52 koen: are we having fun yet? Jun 19 17:31:55 prpplague: define fun Jun 19 18:23:10 it's not Friday is it? Jun 19 18:24:17 Not suite. Jun 19 18:24:20 *quite Jun 19 18:26:32 wmat: sorry no Jun 19 18:26:35 wmat: wish it was Jun 19 18:27:52 * dm8tbr agrees Jun 19 18:28:12 hi all Jun 19 18:28:16 although local reality says friday this week falls on a thursday Jun 19 18:28:42 So I'm trying to coniugre my lbcm503 (mt9p031 driver) camera on my xM and I need to work out to configure the media-ctl arguments to *crop*. Jun 19 18:28:53 This module claims to run at 60 fps for 1280x720 resolution. Jun 19 18:29:19 at least the docs for it do. Jun 19 18:29:31 What I'm stuck trying to work out is how to specify the crop arguments in the media-ctl string. Jun 19 18:30:10 I see some notices about a new "selections API" which I don't think I'm using in this build. Jun 19 18:30:43 prpplague: we can *make* it friday Jun 19 18:31:48 mru: can you make the boiling point of water much lower as well? i need to get my tea made quicker.... Jun 19 18:33:02 prpplague: Oh hey Jun 19 18:33:11 yes? Jun 19 18:33:27 prpplague: Dude, I went into a store yesterday...and on the shelves, no lie, is an effing JuiceBox SD card carrying case. Jun 19 18:34:03 Sh0rtWave: hehe Jun 19 18:47:53 Aight I worked out the crop issues Jun 19 18:47:57 but now I need to know about speed Jun 19 18:48:07 the best I can seem to get is around 14 frames per second. Jun 19 19:17:17 Sh0rtWave: just capturing or storing the frames or even more too? Jun 19 19:34:03 capturing at the moment Jun 19 19:34:13 It's SUPPOSED to be much much faster Jun 19 19:34:50 Sh0rtWave: what resolution? Jun 19 19:35:33 I'm cropping to 1280x720 Jun 19 19:35:41 I tried cropping to 720x480 Jun 19 19:35:47 noting I do seems to change the frame rate Jun 19 19:36:08 hello Jun 19 19:36:13 if I capture at the full size 2952x1944, it drops to like 6 fps, but otherwise it hovers around 11/14 FPS Jun 19 19:36:39 does anybody know of a nice straightforward walk through to install ubuntu on the beaglebone? Jun 19 19:36:40 Sh0rtWave: i might have missed a lot of the discussion but that sounds very fast for a beagle product Jun 19 19:38:35 jgordo32: you may have overlooked beagleboard.org ? Jun 19 19:40:18 djlewis: where specifically? I found the ubuntu on beagle bone project, but it just links to the wiki about installing ubuntu on all beagleboards... and its a little too generic Jun 19 19:40:32 im having trouble figuring out which parts are for beaglebone specifically Jun 19 19:41:56 hi anyone has used that as the buildroot that contains the driver for the camera mt9p031, I need help to capture video Jun 19 19:50:19 looks like I need to build a specific kernel Jun 19 19:55:23 hi anyone has used that as the buildroot that contains the driver for the camera mt9p031, I need help to capture video Jun 19 19:56:12 Hrm Jun 19 19:56:18 Maybe I don't need the updated kernel Jun 19 19:56:35 It seems like soemthing is interfering with the capture speed Jun 19 20:20:26 hi anyone has used that as the buildroot that contains the driver for the camera mt9p031, I need help to capture video Jun 19 20:41:46 hi anyone has used that as the buildroot that contains the driver for the camera mt9p031, I need help to capture video Jun 19 22:01:38 hi anyone has used that as the buildroot that contains the driver for the camera mt9p031, I need help to capture video Jun 19 22:52:16 travalas: nope Jun 19 22:54:01 travalas: but have you unblocked it? Jun 20 00:26:39 how do I edit the info.plist on osx lion to connect to a beagleboard-xm via serial-to-usb? Jun 20 00:27:00 * for the FTDI driver Jun 20 00:51:43 how do you connect to a beagleboard-xm via usb-to-serial on osx lion? Jun 20 00:55:10 with a cable Jun 20 00:56:22 hmm, I usually do it with my hands Jun 20 00:56:33 unless the plugs are very tight, in which case I use pliers Jun 20 00:59:19 mranostay: it doesn't connect on osx Jun 20 00:59:24 or lion at least Jun 20 00:59:28 wireless, dude! Jun 20 00:59:43 does the xm have wireless? Jun 20 00:59:59 if you don't connect any wires it'll be quite wireless Jun 20 01:00:27 uhhhh, can you connect to it wirelessly? Jun 20 01:00:43 I'm sure Tesla could've done it Jun 20 01:00:53 ahhh, he probably could have Jun 20 01:01:12 specifially, though, i'm trying to connect via usb-to-serial Jun 20 01:01:15 to no avail Jun 20 01:01:34 i've discovered that you need to patch the ftdi driver plist for the beaglebone Jun 20 01:01:48 but haven't found anything related to the beagleboard xm Jun 20 01:01:56 i assume you need to do the same type of thing Jun 20 01:02:04 but i don't know how to patch it **** ENDING LOGGING AT Wed Jun 20 02:59:59 2012