**** BEGIN LOGGING AT Thu Jul 12 02:59:58 2012
Jul 12 03:13:13 * trelane spends a bit bowing towards jkridner for the gigantic bucket of awesome which is the beaglebone
Jul 12 03:13:14 <trelane> thanks man
Jul 12 03:13:27 <jkridner__> :)
Jul 12 03:13:58 <jkridner__> check is in the mail. :)
Jul 12 03:15:40 * jkridner__ can't figure how how my camera cape grew legs.
Jul 12 03:16:24 <jkridner__> finding all sorts of stuff I didn't realize I'd even lost.
Jul 12 03:25:43 <trelane> jkridner: I have pretty much all the sensors on the bone for my aquaponics project, need to mock up a cape next.
Jul 12 08:44:43 <vanity> hi
Jul 12 08:45:18 <vanity> How to load a kernel module automatically at boot time? (in Angstrom distro.)
Jul 12 08:56:03 <woglinde> same as on other distros too
Jul 12 08:59:28 <Guest10839> modpobe module
Jul 12 08:59:39 <Guest10839> modprobe*
Jul 12 09:00:16 <woglinde> thats not automagicly
Jul 12 09:00:23 <woglinde> but yes comes from the same tools
Jul 12 09:02:07 <Guest10839> woglinde: if a module is load if modprobe, is not autoload at reboot?
Jul 12 09:02:28 <Guest10839> if a module is correct load by modprobe*
Jul 12 09:14:19 <woglinde> guest10839 what you mean is /etc/modules
Jul 12 09:14:42 <Guest10839> ok
Jul 12 10:01:25 <vanity> okay, thanks :-)
Jul 12 11:16:55 <Just-in> quick question i did dmesg to find the dev/sd? of my sd card and its showing sdd 7.94 gb. When doing the "sudo .mkmmc-android /dev/sd<device> it would be /dev/sdd right?
Jul 12 11:25:07 <bobsickle> assuming that script sets up all the partitions as well, sure
Jul 12 11:25:37 <Just-in> it does.
Jul 12 11:26:03 <bobsickle> have fun then
Jul 12 11:26:35 <Just-in> shes running
Jul 12 11:28:47 <Just-in> and done
Jul 12 13:07:59 <av500> hi
Jul 12 13:08:05 <av500> suse on beagle?
Jul 12 13:08:05 <agraf> av500: howdy :)
Jul 12 13:08:08 <agraf> yeah
Jul 12 13:08:33 <agraf> so to get the whole voltage control stuff going on panda, i just updated u-boot (and SPL) to upstream 2012.04
Jul 12 13:08:57 <agraf> and figured i should give the built binaries a whirl on the beagleboard xm i have here as well
Jul 12 13:09:25 <agraf> turns out if doesn't even finish booting - breaks either with freezes or weird errors
Jul 12 13:09:44 <av500> running the *same* binaries as on panda?
Jul 12 13:09:50 <agraf> weird: http://paste.debian.net/178753/
Jul 12 13:09:55 <agraf> av500: no, compiled for beagle
Jul 12 13:10:09 <agraf> av500: just the same sources
Jul 12 13:10:43 <agraf> omap3_beagle_config should be good for the xm, right?
Jul 12 13:10:59 <av500> what kernel?
Jul 12 13:11:21 <av500> I dont think $random_upstream will work
Jul 12 13:11:27 <agraf> av500: 3.4, but the same kernel worked flawlessly until i updated the bootloader
Jul 12 13:11:33 <av500> ah
Jul 12 13:12:13 <agraf> av500: before i was using some linaro x-loader state and 2011.09 linaro u-boot
Jul 12 13:12:33 <agraf> av500: replaces both by SPL+u-boot from upstream 2012.04
Jul 12 13:12:38 <agraf> replaced*
Jul 12 13:12:39 <aholler> use 3.2.x
Jul 12 13:13:08 <agraf> aholler: why? the kernel worked fine just now
Jul 12 13:16:51 <aholler> everything above is broken on the beagleboard, at least here.
Jul 12 13:19:57 <ynezz> omap is broken
Jul 12 13:20:22 <av500> not fucked?
Jul 12 13:20:37 <ynezz> just trying to be polite :)
Jul 12 13:20:48 <av500> http://www.spinics.net/lists/linux-omap/msg65779.html
Jul 12 13:22:08 <ynezz> yes, have read it
Jul 12 13:54:19 <ka6sox> it really isn't the end of the world as we know it...
Jul 12 13:55:14 <agmlego> It is, though.
Jul 12 13:55:35 <ka6sox> ...
Jul 12 13:56:36 <agmlego> ka6sox: World is always changing. What you knew about it an hour ago may not be fully true now. Thus, the world, as we know it, is constantly ending.
Jul 12 13:57:53 <ka6sox> True, we can no longer ride in the back of a Pickup truck without a seatbelt...
Jul 12 13:59:34 <ka6sox> but as for OMAP being "f'd" unless someone just throws up their hands and cuts off any more fixes it "should" recover.
Jul 12 13:59:59 <ka6sox> (unless there is background politicking I'm missing)
Jul 12 14:00:52 <agmlego> Sounds reasonable to me.
Jul 12 14:26:19 <Crofton> arg, the mankini
Jul 12 14:40:15 <aholler> 3.2.x wilbe supported for some time, so as long as you don't need new drivers there is nor reason to fix something someone else will brake again
Jul 12 14:42:18 <xxiao> narcissus-x86-host build: how are the content in SDK decided, say, if i have libSDL in the rootfs, will SDK contain libsdl-dev automatically? are rootfs and host-SDK related somehow?
Jul 12 14:43:19 <xxiao> i'm trying to add libsdl-dev and some other dev packages to SDK and not sure if narcissus is a right option, or should I bitbake them instead?
Jul 12 14:43:47 <xxiao> i don't think i can opkg-cl -o stuff to SDK ...as SDK is not a opkg-managed rootfs
Jul 12 15:14:35 <xxiao> opkg-target that is...
Jul 12 16:02:04 <xxiao> yocto is using adt-install becomes it uses rpm by default, so opkg-target will be "obsolete", am I missing sth?
Jul 12 16:02:12 <xxiao> s/becomes/because/
Jul 12 16:05:43 <smplman> has anyone here ran meego on an XM?
Jul 12 16:07:39 <aholler> I have had compiled some of the meego-stuff for playing with it
Jul 12 16:09:01 <smplman> i might try to get the IVI version running tonight
Jul 12 16:09:17 <smplman> i was looking for some thoughts and opinions on speed an usability
Jul 12 16:17:12 <aholler> can't talk about speed, as I've only tried them with an usb-monitor. And for usability, Meego died suddenly at the time, when I just have had most components to work on my system. So I suddenly lost interest too
Jul 12 17:08:55 <djlewis> gm :)
Jul 12 17:10:25 <woglinde> hi djlewis
Jul 12 17:10:31 <woglinde> time for some pizza
Jul 12 17:12:04 <djlewis> I might have the rest of the 2lb burrito from yesterday
Jul 12 17:12:15 <djlewis> hi woglinde
Jul 12 17:27:44 <mranostay> djlewis: Chipotle?
Jul 12 17:27:58 <djlewis> tri color chicken
Jul 12 17:28:18 <mranostay> sounds like they used bad chicken :)
Jul 12 17:28:25 <djlewis> :)
Jul 12 17:29:09 <djlewis> the green and red salsa's and a light yellow cheese melted over.
Jul 12 17:29:53 <mranostay> i honestly could eat a Chipotle or Moe's everyday. but i'm sure i'd gain 30lb :)
Jul 12 18:45:54 <_av500_> hmm, burrito
Jul 12 18:47:32 <djlewis> burrito all gone :)
Jul 12 18:47:48 <_av500_> dman
Jul 12 19:08:01 <djlewis> someone brought donuts :)
Jul 12 19:18:06 <ka6sox> djlewis, fat pills
Jul 12 19:24:52 * mranostay can't understand how one little accident in the right lane can back up traffic for miles
Jul 12 19:26:25 <woglinde> mranostay so its same in the us
Jul 12 19:26:52 <woglinde> all people making pictures and driving pretty slow to see somethin
Jul 12 19:26:53 <woglinde> g
Jul 12 19:27:07 <mranostay> you seen one accident you seen them all
Jul 12 19:28:33 <mranostay> woglinde: i have never seen slower drivers than NorCal. even when there is no traffic/reason
Jul 12 19:30:40 <woglinde> mranostay the germans says the same about the netherlands
Jul 12 19:33:10 <mranostay> koen: care to comment? :)
Jul 12 19:36:34 <luca__> hi
Jul 12 19:39:22 <luca__> I'm try to compile external module omap3-pwm for my beagleboard xm, but  I have installed just kernel 2.6.32 and bit arm-linux-gnueabi
Jul 12 19:39:50 <luca__> how can compile modules , which the right command
Jul 12 19:40:07 <mranostay> google it
Jul 12 19:41:45 <luca__> $(MAKE) -C $(KERNELDIR) M=$(PWD) modules
Jul 12 19:42:05 <luca__> KERNELDIR=angstrom-linux/arch/arm/kernel
Jul 12 20:44:01 <luca__> hey guys
Jul 12 20:44:21 <luca__> anyone can compile kernel module omap3-pwm ??
Jul 12 20:44:25 <luca__> please
Jul 12 20:44:41 <luca__> I don't know compile
Jul 12 20:44:53 <luca__> the kernel module
Jul 12 20:45:02 <luca__> pls
Jul 12 20:46:51 <genna> hi guys
Jul 12 20:47:28 <genna> anyone can compile kernel module https://github.com/scottellis/omap3-pwm/
Jul 12 20:47:35 <genna> for beagleboard
Jul 12 20:47:59 <genna> please I can't it
Jul 12 20:48:27 <genna> BBxm
Jul 12 20:53:22 <woglinde> I would need your toolchain and precompiled kernel stuff
Jul 12 20:53:32 <woglinde> otherwise module symbol would not match
Jul 12 20:56:05 <genna> please anyone canhelp me?
Jul 12 21:01:24 <genna> pls anyone can hear me
Jul 12 21:01:42 <genna> I would pwm.ko https://github.com/scottellis/omap3-pwm/
Jul 12 21:01:47 <genna> pls
Jul 12 21:02:48 <woglinde> I told you why it would not work
Jul 12 21:02:58 <woglinde> accept it
Jul 12 21:03:15 <woglinde> or try to learn how compile external modules
Jul 12 21:04:22 <genna> I tried it
Jul 12 21:05:13 <genna>  I already compiled kernel creating new uImage
Jul 12 21:05:23 <genna> for my beagleboard xm
Jul 12 21:05:41 <genna> but now I can't create pwm.ko
Jul 12 21:05:57 <genna> https://github.com/scottellis/omap3-pwm
Jul 12 21:06:21 <genna> I tried many times
Jul 12 21:08:05 <woglinde> what is the error?
Jul 12 21:08:08 <woglinde> pastebin
Jul 12 21:15:11 <genna> http://paste.org/51637
Jul 12 21:15:48 <genna> woglinde there are the  result od make module http://paste.org/51637
Jul 12 21:19:15 <woglinde> ???
Jul 12 21:19:16 <woglinde> 2.6.32
Jul 12 21:19:22 <genna> yesss
Jul 12 21:19:42 <woglinde> how did you compile the kernel?
Jul 12 21:20:14 <genna> to create uImage or pwm modules
Jul 12 21:20:26 <woglinde> no
Jul 12 21:20:39 <woglinde> my question was what did you call to compile the kernel
Jul 12 21:21:10 <genna> I follow this guide http://linuxdeveloper.blogspot.it/2011/10/enabling-spi-on-beagleboard-xm.html
Jul 12 21:21:16 * mranostay roots for the euro to drop more :)
Jul 12 21:21:55 <genna> and now i write this command to compile external modules pwm
Jul 12 21:21:57 <genna> make  ARCH=arm -C /lib/modules/2.6.32/build M=/home/gioge/PROGETTI/EISBITRON/omap3pwm CROSS_COMPILE=arm-linux-gnueabi- modules
Jul 12 21:23:15 <woglinde> -C /lib/modules/2.6.32/build ist your host
Jul 12 21:23:19 <woglinde> not the target
Jul 12 21:23:41 <jyoung> I'm having a heck of a time with the latest angstrom images. SSL doesn't work out of the box on the last 2 demo images.
Jul 12 21:24:04 <genna> and so which is the right target
Jul 12 21:24:13 <woglinde> make -C <path to kernel src>
Jul 12 21:24:38 <woglinde> genna no guess and read the tutorial WHERE you unpacked the kernel for your beagle
Jul 12 21:24:44 <woglinde> s/no/now/
Jul 12 21:25:12 <genna> ok but I dont't know where is <path to kernel src>
Jul 12 21:25:21 <woglinde> again
Jul 12 21:25:42 <woglinde> follow the the tutorial and find the step where you did unpack the kernel
Jul 12 21:25:58 <woglinde> HINT: you called make ARCH... uImage in that dir
Jul 12 21:26:32 <woglinde> -> http://lwn.net/Articles/81398/
Jul 12 21:26:43 <genna> so gedit angstrom-linux/Documentation/kbuild/modules.txt
Jul 12 21:26:54 <woglinde> o.O
Jul 12 21:27:06 <woglinde> sure angstrom-linux/Documentation/kbuild/modules.txt is a directory
Jul 12 21:27:19 <woglinde> or is it a file
Jul 12 21:27:27 <woglinde> think about it
Jul 12 21:27:34 <genna> woglinde sory
Jul 12 21:27:38 <genna> sorry
Jul 12 21:27:51 <genna> but I donn't know wath is meaning  <path to kernel src>
Jul 12 21:28:04 <genna> which path
Jul 12 21:28:12 <genna> main kernel
Jul 12 21:28:21 <woglinde> maybee you understand path_to_kernel_dir
Jul 12 21:28:33 <genna> main kernel folder
Jul 12 21:28:39 <woglinde> what else
Jul 12 21:28:46 <genna> so angstrom-linux/
Jul 12 21:28:50 <woglinde> a crystalball with wings?
Jul 12 21:29:14 <genna> where I can found fold: arch  driver firmware
Jul 12 21:29:29 <woglinde> yes and where you run make uImage
Jul 12 21:30:37 <genna> wait a minute now I'm going to try
Jul 12 21:35:05 <genna> the procedure return the same result than before
Jul 12 21:35:55 <woglinde> pastebin it again please
Jul 12 21:37:13 <genna> http://paste.org/51639
Jul 12 21:37:40 <genna> I put two command:
Jul 12 21:37:49 <genna> 1)make -C /home/gioge/PROGETTI/EISBITRON/angstrom-linux M=/home/gioge/PROGETTI/EISBITRON/omap3pwm
Jul 12 21:37:53 <genna> 2)make -C /home/gioge/PROGETTI/EISBITRON/angstrom-linux M=/home/gioge/PROGETTI/EISBITRON/omap3pwm modules_install
Jul 12 21:38:04 <woglinde> why modules_install?
Jul 12 21:38:15 <woglinde> why you want to install it on your host
Jul 12 21:38:19 <genna> like my angstrom-linux/Documentation/kbuild/modules.txt
Jul 12 21:38:46 <woglinde> you forgot
Jul 12 21:38:48 <woglinde> ARCH=arm
Jul 12 21:38:57 <woglinde> and CROSS_COMPILE
Jul 12 21:39:30 <genna> ok I back try
Jul 12 21:40:03 <woglinde> you compiled the kernel with make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
Jul 12 21:40:16 <woglinde> so you should compile the modules too
Jul 12 21:40:21 <genna> okok
Jul 12 21:40:26 <genna> wait
Jul 12 21:41:38 <genna> already this value are set on enviroment variable
Jul 12 21:41:43 <woglinde> and do not call modules_install
Jul 12 21:41:58 <woglinde> without specify some otherpath
Jul 12 21:42:03 <genna> anyway now  put make  ARCH=arm -C /home/gioge/PROGETTI/EISBITRON/angstrom-linux M=/home/gioge/PROGETTI/EISBITRON/omap3pwm CROSS_COMPILE=arm-linux-gnueabi-
Jul 12 21:42:16 <woglinde> otherwise it will install the modules into your host kernel modules dir
Jul 12 21:42:17 <genna> the same result
Jul 12 21:42:44 <woglinde> put the ARCH=arm behind -C and -M
Jul 12 21:42:49 <woglinde> and than pastebin again
Jul 12 21:42:56 <genna> ok
Jul 12 21:43:28 <woglinde> O=/some/path install the modules there with modules_install
Jul 12 21:44:01 <genna> ok
Jul 12 21:47:20 <genna> ok http://paste.org/51640
Jul 12 21:49:36 <woglinde> genna are you sure you compiled the kernel?
Jul 12 21:49:45 <genna> yes
Jul 12 21:49:56 <woglinde> no
Jul 12 21:50:08 <genna> look http://linuxdeveloper.blogspot.it/2011/10/enabling-spi-on-beagleboard-xm.html
Jul 12 21:50:22 <genna> I created uImge
Jul 12 21:50:43 <woglinde> than your kernel-source is to old
Jul 12 21:50:48 <genna> if yoou want I create the uImage another time
Jul 12 21:51:02 <genna> ok so I will repeat it
Jul 12 21:51:02 <woglinde> hm no
Jul 12 21:51:12 <genna> and so?
Jul 12 21:51:19 <woglinde> it checks for include/linux/autoconf.h or include/config/auto.conf
Jul 12 21:51:26 <woglinde> so older kernel should work
Jul 12 21:51:44 <genna> where I have to check?
Jul 12 21:52:26 <woglinde> go to /home/gioge/PROGETTI/EISBITRON/angstrom-linux
Jul 12 21:52:34 <woglinde> and compile uImage again
Jul 12 21:52:54 <woglinde> with ARCH=arm and CROSS_COMPILE=arm-linux-gnueabi-
Jul 12 21:53:06 <genna> ok
Jul 12 21:55:03 <genna> ok now kernel is runnin with make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- uImage
Jul 12 21:55:18 <genna> we have to wait...sorry
Jul 12 21:55:48 <woglinde> hm did you configure it right beforeß
Jul 12 21:56:00 <woglinde> you might get a kernel for another machine
Jul 12 21:56:07 <ka6sox> hiya woglinde
Jul 12 21:56:15 <woglinde> hi ka6sox
Jul 12 21:56:21 <genna> nono beagle
Jul 12 21:56:32 <genna> yes
Jul 12 21:56:35 <woglinde> you will see in the end
Jul 12 21:56:54 <genna> but this kernel is running onn my beagleboard and it is ok
Jul 12 21:57:15 <woglinde> okay
Jul 12 21:57:20 <genna> but now I would enablle the pwm so I have to set mux
Jul 12 21:57:29 <genna> Please do not go away
Jul 12 21:57:48 <woglinde> depends
Jul 12 21:58:08 <genna> now kernel is running
Jul 12 21:58:27 <genna> depends by spent time?
Jul 12 22:00:02 <genna> maybe I have to make kernel with: make       and stop  without uImage
Jul 12 22:00:49 <woglinde> depends if I got to bed now or not
Jul 12 22:03:47 <genna> when you decide to go bed, can you warn me?
Jul 12 22:04:29 <genna> okok finish
Jul 12 22:04:43 <genna> now what I do?
Jul 12 22:04:43 * _av500_ goes to bed now, this is a final warning!
Jul 12 22:04:56 <woglinde> hehe
Jul 12 22:05:05 <woglinde> genna stop it
Jul 12 22:05:14 <genna> o
Jul 12 22:05:17 <genna> ok
Jul 12 22:05:19 <_av500_> cant stop me now
Jul 12 22:05:59 <woglinde> and call prepare instead of uImage
Jul 12 22:06:11 <woglinde> after that try to compile the modul again
Jul 12 22:06:44 <genna> the result, look http://paste.org/51641
Jul 12 22:07:33 <woglinde> now try to compile the module again
Jul 12 22:07:43 <genna> I don't uunderstand what I can do
Jul 12 22:07:48 <genna> ok
Jul 12 22:08:04 <genna> make  ARCH=arm  -C /home/gioge/PROGETTI/EISBITRON/angstrom-linux M=/home/gioge/PROGETTI/EISBITRON/omap3pwm  ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- O=/home/gioge/PROGETTI/EISBITRON/output
Jul 12 22:08:12 <genna> is it ok the command?
Jul 12 22:08:15 <woglinde> yes
Jul 12 22:08:51 <genna> sorry but that is the same problem
Jul 12 22:09:12 <genna> the last same  problem
Jul 12 22:09:25 <woglinde> hm than you need a newer kernel
Jul 12 22:09:30 <woglinde> as 2.6.32
Jul 12 22:09:38 <genna> make  ARCH=arm  -C /home/gioge/PROGETTI/EISBITRON/angstrom-linux M=/home/gioge/PROGETTI/EISBITRON/omap3pwm  ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- O=/home/gioge/PROGETTI/EISBITRON/output
Jul 12 22:11:20 <genna> now I have 2.6.32
Jul 12 22:11:38 <genna> Image Name:   Linux-2.6.32
Jul 12 22:12:00 <woglinde> sure
Jul 12 22:12:06 <genna> Created:      Fri Jul 13 00:04:16 2012
Jul 12 22:12:14 <woglinde> lates kernel for bbxM is at  3.2
Jul 12 22:12:30 <genna> yes I know
Jul 12 22:12:46 <genna> but I think that isn'tthe problem
Jul 12 22:13:06 <woglinde> it is the problem
Jul 12 22:13:13 <woglinde> the kernel config stuff changed
Jul 12 22:13:24 <woglinde> and the readme is about kernel 3.1 or newer
Jul 12 22:13:28 <jyoung> Anyone running ubuntu on the beaglebone?
Jul 12 22:13:54 <genna> now I start make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
Jul 12 22:14:00 <genna> without uImage
Jul 12 22:15:40 <woglinde> genna you could check if there is a  autoconf.h file
Jul 12 22:16:31 <genna> yes into include/linux
Jul 12 22:17:05 <woglinde> cd /home/gioge/PROGETTI/EISBITRON/angstrom-linux
Jul 12 22:17:15 <woglinde> find -name auto.conf
Jul 12 22:17:29 <woglinde> and find -name autoconf.h
Jul 12 22:17:52 <woglinde> okay have to go now
Jul 12 22:18:15 <genna> wait just a second
Jul 12 22:18:41 <genna> is itpossble download and instal by opkg directily from begleboard
Jul 12 22:18:55 <genna> to enale mux to pwm??
Jul 12 22:20:51 <woglinde> dont know
Jul 12 22:21:03 <woglinde> but I dont think there was a recipe
Jul 12 22:21:40 <woglinde> good luck
Jul 12 23:12:47 <linuxjacques> is the beaglebone power barrel connector the same as on beagleboard?
Jul 12 23:14:54 <XgF> linuxjacques: Being as they say BeagleBoard adaptors will fit, one would expect so
Jul 12 23:15:07 <linuxjacques> XgF, thanks
Jul 12 23:49:44 <lucasrangit> If I update u-boot, MLO, and uImage from the binaries that came with the xM, where else does the serial port name need to change from ttyS2 to ttyO2 besides in the u-boot console variable and the /etc/inittab getty? I'm no longer getting the Angstrom login prompt on my serial console.
Jul 12 23:50:13 <lucasrangit> Or am I required to also upgrade my root file system from the version that came with the board?
Jul 12 23:56:39 <aholler> securetty
Jul 13 00:55:56 <lucasrangit> I'm testing my pin mux in U-Boot for UART2. UART2_TX appears to idle high but is configured without a pull up or pull down. Can anyone comment on the correct idle polarity for UART2_TX off the expansion header?
Jul 13 01:23:07 <dgilmore> could someone give me a dtb file for a beaglebone please
Jul 13 01:23:26 <dgilmore> the dts files are not in the mainline kernel
Jul 13 02:59:46 <xxiao>  /sys/devices/platform/omapdss/display0/timings is read-only now?
Jul 13 02:59:50 <xxiao> can't write to it
**** ENDING LOGGING AT Fri Jul 13 02:59:58 2012