**** BEGIN LOGGING AT Tue Jul 24 02:59:58 2012 Jul 24 04:59:37 Hi everybody....Now i am worhing on beaglebone so that i want to add am335x board support package to kernel 3.4.4.How to add the BSP support.... Jul 24 05:02:21 _av500_: first song of the day a new fad? Jul 24 05:03:01 beaglebone: apply the patches from other trees? Jul 24 05:11:50 beaglebone: you asked before, you got answers. act on them or let it be, but don't ask, again. Jul 24 10:07:17 hi Jul 24 10:35:34 hi Jul 24 10:35:50 hi, how to interface 2 or 3 NAND flash's to GPMC (OMAP3530)? Jul 24 11:59:37 Hello All, I'm Trying to run the Hello world! Example of SYS Bios using Code composer studio 5.2 and XDS100V2 Emulator , and i made the configuration file for Beagleboard_xMm then build the program and run the Debug , then connect the Arm side then the DSP side and load the program , but nothing appeared on the Console as expecting Hello World , do i have something wrong with the configurations of the CCS5.2 Jul 24 12:08:03 Can this run on the beagleboard? http://gstreamer.freedesktop.org/wiki/QtGStreamer Jul 24 12:12:14 RCstudie:this is not a place where you can get answer to your question without even trying yourself Jul 24 12:15:38 Tried to compile through toolchain, but it jumps over the libraries, so I guess not. Jul 24 12:20:31 ypu configured it for cross-comp before compiling? Jul 24 12:21:02 No idea how I do that, so I guess not Jul 24 12:26:38 see the configure help option or README file Jul 24 12:35:43 K, will look into cmake cross-compiling Jul 24 13:11:00 jkridner: ping Jul 24 14:17:55 can I use LI-VI365 expansion board (from leopardboard) on beagle xM ? Jul 24 14:18:17 i can't find driver in beagle kernel sources Jul 24 14:59:01 mru: good catch Jul 24 16:51:25 So why should I buy a Beagle instead of a raspberry pi? Jul 24 16:52:31 you shouldnt Jul 24 16:52:50 you should conside whats your use case and buy whatever board fits it best Jul 24 16:52:54 *consider Jul 24 16:53:12 buy a case of beer Jul 24 16:53:22 Beagle is too expensive..forget about it Jul 24 16:53:23 now thats a goos use case ! Jul 24 16:53:28 my use case is play around and learn. maybe make remote management app Jul 24 16:53:32 *good even Jul 24 16:53:35 koen, I have a use case for that Jul 24 16:54:45 what does beagle cost? 150$ ? Jul 24 18:55:02 I have a beagleboard C3. I have successfully installed Ubuntu-arm on it with Xfce desktop envorinment. I have been using it with a dvi monitor. Now I wanted to switch to svideo. I have edited uenv.txt in boot partition. I have set the display as tv and mode as 640x480@60. Unfortunately, I can not see the desktop with my display. Jul 24 18:55:11 uname -a returns 3.2.13 kernel Jul 24 18:55:29 I can see the kernel booting up phase Jul 24 18:55:37 But not the desktop, any ideas on how to find a cure for the case? Jul 24 18:55:51 I have tried to sudo dpkg-reconfigure lightdm but no chance Jul 24 18:56:00 I have manually stopped and restarted lightdm through rs232 link but still no luck Jul 24 18:56:08 There is a xorg.conf file under boot partition table. I have deleted it so that xorg should reconfigure itself. But still the same Jul 24 18:56:12 any other ideas? Jul 24 18:57:00 This is where I found the image of ubuntu-arm 12.04: http://elinux.org/BeagleBoardUbuntu#Method_1:_Download_a_Complete_Pre-Configured_Image Jul 24 19:03:12 Hiya, anyone care to help a noob with a couple questions regarding setting up angstrom on sd card? Jul 24 19:05:45 For a couple days now I have been trying to get angstrom and uboot installed on an sd card. I now have it to the point where it's mostle working, but I'm unable to save uboot environment, and ehternet is not recognized Jul 24 19:06:11 Can anyone advise best way to proceed. I'm using beagleboard xm rev c Jul 24 19:23:18 guy, I have two kernels in my ubuntu install. How do I switch in between them? Jul 24 19:23:31 Is it something to be arranged in uEnv.txt? Jul 24 19:26:18 How do I set which kernel to boot? Jul 24 19:27:17 brandon: the xm has no nand, use uEnv.txt to store configure your environment at boot time Jul 24 19:27:58 Hello, I'm running Angstrom Linux 3.2.18-rt29 on a BeagleBone, I've modified limits.conf and am running as root, but still have errors trying to run `sched_setscheduler`. Is there a known fix? thanks (also posted on #systemd) Jul 24 19:31:42 Hey i've been assigned to do a project dealing with helping visually impaired. I have a beagleboard C4, and i know this board is capable of simple image processing. What about image recognition? What are the boards limitations in terms of its ability to process this information? Will it detect an incoming car? Jul 24 19:35:17 Odious: I think you want to look at OpenCV. I know I've seen articles of people using that on the Beagle Jul 24 19:36:42 kunguz: have you looked at your uEnv.txt? Jul 24 19:37:47 kunguz: I don't know what the one that comes with an Ubuntu image looks like, but with Angstrom the kernel is named uImage. Change the setting that references that. Jul 24 19:38:06 alan_o: I am reinstalling the ubuntu-arm, it may solve my problem since I have been using another image which uses an old kernel Jul 24 19:38:10 kunguz: http://elinux.org/BeagleBoardUbuntu#boot.scr_-.3E_uEnv.txt Jul 24 19:39:57 alan_o: thanks anyway Jul 24 19:40:30 So can you connect hdmi or tvout to your beagle and use it as mediaplyer? Jul 24 19:46:56 alan_o: no networking yet, but it boot into a rootfs on usb: https://github.com/beagleboard/kernel/tree/beaglebone-3.6/ Jul 24 19:48:42 Qtr: http://beagleboard.org/project/XBMC/ One example. There are others, Google is your friend. Jul 24 19:49:59 koen: interesing, thanks for the info... So that github project is up to date now? For a while it was said it was lagging. Jul 24 19:50:46 said where? Jul 24 19:50:46 * alan_o just saw on the github page: koenkooi authored 6 minutes ago Jul 24 19:50:48 Is there an OE recipe for libwebcam ? Jul 24 19:51:11 alan_o: that github is the authorative source for beagleboard.org board kernels :) Jul 24 19:51:18 alan_o: so by definition it can't lag :) Jul 24 19:51:48 koen: I thought the authoritative source was OE Jul 24 19:52:08 the recipe in OE is created with the script in that git Jul 24 19:53:14 the am335x-linux tree on that same github.. what about that? Last touched 6 months ago. Maybe that's what I had heard was lagging. Jul 24 19:54:05 "lagging" requires a reference point to determine lag Jul 24 19:54:55 mdp: lagging behind arago I guess. Of course, I guess since the bone kernel relies on a specific version of the arago kernel, I guess it doesn't matter much in that sense. Jul 24 19:57:14 alan_o, koen has to take a particular "arago kernel" snapshot and then port all the functionality that TI will not accept that makes the canonical beaglebone kernel work well. Jul 24 19:57:30 so it should not be a surprise that there will be newer arago kernels... Jul 24 19:57:31 I have a C4. Whats the best way to get internet connection. USB to Ethernet or Wi-Fi. Drivers will be an issue? and Models? Jul 24 19:57:46 just like an ubuntu kernel lags behind mainline 3.5 Jul 24 19:58:39 mdp: correct. Jul 24 20:02:03 alan_o, the TI SDK kernel also "lags" behind the arago am335x git tree for the same reason..different set of patches applied to that tree for the SDK distro Jul 24 20:09:16 koen: this looks really good. I think this gets me a lot closer to where I need to be. Thanks for the heads-up Jul 24 20:14:56 How hard do you think it would be to remake a vacuum cleaner to a cleaning robot that goes around my floor and vacuums? Jul 24 20:16:13 Qtr: depends. :) It's doable I imagine. Jul 24 20:21:04 alan_o: networking support is expected in a few days Jul 24 20:22:51 koen: Excellent! I'll keep an eye on that branch. Jul 24 20:23:12 koen: howdy pardner :) Jul 24 20:49:04 Is there an OE recipe for libwebcam ? Jul 24 21:01:21 koen, the best part about that tree is that the DT support solves *everything* Jul 24 21:23:39 So, I followed the instructions here: http://www.angstrom-distribution.org/building-angstrom Jul 24 21:23:59 So, my question: Why does the repo build 3.2.18? Shouldn't it build 3.2.23? Jul 24 21:32:42 bsder, why? Jul 24 21:33:45 I can build the kernel, but when I do the opkg update; opkg upgrade dance, it pulls my kernel up from 3.2.18 to 3.2.23. Jul 24 21:34:19 I'm trying to write a codec driver which handles multiple codecs on the McASP bus. Jul 24 21:34:53 I'd rather start from the DaVinci stuff which appears in 3.2.23, but not 3.2.18. Jul 24 21:35:40 Of course, I could be completely confused as well. I'm not real clear on all the interrelationships between Angstrom, Linux, and OpenEmbedded. Jul 24 21:44:06 I got lost at "DaVinci" Jul 24 22:03:38 The 3.2.23 kernel has a module: kernel-module-snd-soc-davinci-mcasp Jul 24 22:03:55 It already does I2C and McASP stuff, so I figured it would be a good starting point ... Jul 24 22:07:35 But I don't think it exists in 3.2.18. So, if I try to build it using the cross chain, it's likely to fail. Jul 24 22:08:57 I obviously need to do something special, but I really don't know what... Jul 24 22:24:03 is it a Friday in here? Jul 24 22:28:30 I feel drained enough to be a friday Jul 24 23:22:01 anyone game to help debug a network connectivity issue on the BBxM? Jul 24 23:23:10 One location everything works fine, move to another network (different city) things act all wonky Jul 24 23:23:38 angstrom, btw Jul 24 23:30:00 prpplague: welcome to the Friday Jul 25 00:19:36 ftr i ended up getting rid of my issue by 'rmmod smsc95xx' **** ENDING LOGGING AT Wed Jul 25 02:59:58 2012