**** BEGIN LOGGING AT Fri Jul 27 02:59:59 2012 Jul 27 03:27:27 Does anyone know a good getting started guide for the beaglebone on GNULINUX¡, because I've tried to run ssh root@beaglebone.localh and I got this message: Could not resolve hostname beaglebone.local: Name or service not know Jul 27 03:31:38 http://learn.adafruit.com/beaglebone/ Jul 27 03:44:29 thanks Jul 27 03:45:27 However, it is on windows! Anyway! thank you very much Jul 27 07:30:28 I'm having issues again. When I try "echo 7 > export" no new dir shows up. Any gpio I try dose not create a new dir Jul 27 07:32:34 Using a fs from narcissis and it is a bb rev C5 Jul 27 07:32:43 techb: maybe read http://www.avrfreaks.net/wiki/index.php/Documentation:Linux/GPIO#GPIO_Numbers Jul 27 07:33:22 mount debugfs and check /sys/kernel/debug/gpio to see which ones are taken Jul 27 07:34:03 debug is empty, no files in that dir Jul 27 07:34:23 read the whole line again... Jul 27 07:34:51 And gpio7 is the userbutton Jul 27 07:35:15 Sorry, give me a sec, didn't see the mount Jul 27 07:41:35 I see gpio-7 (user) in lo Jul 27 07:46:34 So that means I can't use it? The reference manual says I should be able to after boot up Jul 27 08:03:44 it's used as evdev Jul 27 08:07:53 That's /sys/class/input/event* right? Jul 27 08:08:40 /dev/input/event* Jul 27 08:11:40 Did that happen with a new kernel version or something? O was able to export it before I started using a new sdcard Jul 27 08:31:42 Nevermind, found some more info. I'm a bit new to embedded *nix, used to AVRs Jul 27 08:31:54 thanks for the help Jul 27 09:28:52 HY Jul 27 09:30:58 how are you Jul 27 10:27:23 morning Jul 27 10:37:36 anyone up? Jul 27 10:57:30 koen, your link to the mmc patch isn't working for me. http://www.isup.me/dominion.thruhere.net Jul 27 10:57:50 but awesome to see that at least the kernel is recognizing the mmc Jul 27 10:58:25 funny that there's 2 boot partitions, data sheet says single 1MiB boot partition, but maybe I misread Jul 27 12:29:26 [10:57:30] "koen, your link to the mmc patch isn't working for me. http://www.isup.me/dominion.thruhere.net" Jul 27 12:29:42 nevermind... Jul 27 12:30:31 I assume PC wasn't on yet. It was early, I hadn't had coffee yet. Jul 27 13:10:06 bradfa: I just moved it 120km by car :) Jul 27 13:10:18 then dns needed to propagate Jul 27 13:10:58 koen, cars are faster than DNS! News at 11! Jul 27 13:10:59 :) Jul 27 13:17:02 bradfa: if you think about it, a freight train full of LTO5 tapes is one of the fastest ways to move digital data, and probably beats the oh-so-hyped FTTH b several orders of magnitude. :) Jul 27 13:18:31 LetoThe2nd, yeah, but a DNS configuration is quite small, even my trusty 2400 baud modem from the 1990s would be pretty quick with that :) Jul 27 13:18:58 bradfa: you have to think larger scale. really. :) Jul 27 13:19:14 I'm an embedded guy, large scale isn't what I do :) Jul 27 13:20:39 hehe Jul 27 13:23:35 Does the beagleboard come with an emulator? What dev environment domyou use? Eclipse? Jul 27 13:23:53 what do you mean "comes with" ? Jul 27 13:24:04 qemu can emulate a beagleboard Jul 27 13:24:35 Like is there a workbench for it which you can use that you dont have to pay extra for? I mean the beagle might be fairly cheap but what does the tools cost? Jul 27 13:25:09 well it's a standard linux ... Jul 27 13:25:28 you use whatever dev tool you want to use Jul 27 13:28:47 bradfa: final patch: https://github.com/beagleboard/kernel/blob/beaglebone-3.2/patches/beaglebone/0085-beaglebone-add-rudimentary-support-for-eMMC-cape.patch Jul 27 13:29:20 w1-gpio conflicted with gpmc-ad3 Jul 27 13:34:25 koen, does that still init mmc0 if there's no eMMC cape attached? Jul 27 13:36:08 and using the uart1_rxd i/o for write protect seems odd, is the wp pin really needed by the am33xx mmc subsystem? Jul 27 13:36:22 * bradfa should look at the tpm Jul 27 13:37:58 I'm curious as my cape is going to layout with uart1_rxd used as uart1_rxd (mode 0) and leaving the mmc1_wp pin just not connected to anything Jul 27 13:41:39 oh fun, if you put the TPS65217 into SLEEP state, the reset button doesn't do anything... hmm... Jul 27 14:09:07 bradfa: I copied joelagnels code Jul 27 14:09:19 bradfa: for the emmc cape we can remove a few signals Jul 27 14:09:27 bradfa: and it should still init mmc0 Jul 27 14:09:38 k Jul 27 14:09:42 thanks! Jul 27 14:26:16 My usb0 keeps on dieing, and refuses to start up Jul 27 14:26:31 ifconfig usb0 up makes it work for some time before it dies again Jul 27 14:44:59 DHCPDISCOVER fails Jul 27 14:45:12 is it the beagleboard or ISP? Jul 27 14:45:40 usb0 ? you're sure ? Jul 27 14:45:46 usually that's usb slavev Jul 27 14:51:33 hi Jul 27 14:52:07 I am having tough time preparing a xbmc image for my beagleboard on sgx drivers Jul 27 15:07:44 ohai! is narcissus down? Jul 27 15:16:13 RCstudie: beagleboard xM? Jul 27 15:19:55 yes Jul 27 15:21:48 RCstudie: 3.2.18? Jul 27 15:22:23 g2g Jul 27 15:22:30 what? Jul 27 15:24:12 gotta go...cool Jul 27 16:17:44 the image builder should be back up again...poor thing had indigestion. Jul 27 16:30:38 * einball praises ka6sox-away Jul 27 16:30:57 * ka6sox-away chuckles Jul 27 16:33:54 ;) Jul 27 16:38:17 hmm, but it still has hiccups :P Jul 27 16:38:46 oh works now Jul 27 19:44:13 boy is it a Friday in here Jul 27 20:23:46 hi everyone Jul 27 20:24:34 is anbody who made compile the qt embedded libs ? Jul 27 21:06:07 mranostay: friday, where? Jul 27 21:07:30 * mranostay hurls a Friday at mru **** ENDING LOGGING AT Sat Jul 28 02:59:59 2012