**** BEGIN LOGGING AT Sat Jul 28 02:59:59 2012
Jul 28 05:04:26 <_av500_> where is djlewis when one needs him: http://wondermark.com/856/
Jul 28 05:05:48 <mranostay> _av500_: nice :)
Jul 28 05:06:11 <mranostay> ,mmm I think I'll do Chipotle after the range tomorrow
Jul 28 05:37:09 <bsder> What package do I need to install to get gcc?
Jul 28 05:37:25 <ka6sox> or what distro?
Jul 28 05:37:31 <bsder> I did an "opkg install gcc", but I still don't have a gcc executable anywhere ...
Jul 28 05:37:31 <ka6sox> freebsd?
Jul 28 05:37:39 <ka6sox> oh
Jul 28 05:37:40 <bsder> Sorry, angstrom ...
Jul 28 05:39:01 <bsder> Although, does FreeBSD work on the BeagleBone?  That idea appeals ...
Jul 28 05:40:09 <ka6sox> dunno of a microkenel that works on the 3359
Jul 28 05:45:29 <bsder> Crud ...
Jul 28 05:46:26 * mranostay chugs a beer and scrolls up
Jul 28 05:46:48 <mranostay> is there a FreeBSD ARM port?
Jul 28 05:47:16 <_av500_> or Open or Net?
Jul 28 05:47:41 <mranostay> heh "FreeBSD should work on the i80321 based Intel XScale® devboards, "
Jul 28 05:47:52 <mranostay> behind again
Jul 28 06:46:04 <koen> bsder: opkg install task-sdk-target
Jul 28 06:46:13 <koen> bsder: that wil get you binutils, make, etc as well
Jul 28 06:46:30 <bsder> koen: thanks
Jul 28 06:48:57 <bsder> I managed to get my module cross compiled using recipes installed into sources/meta-angstrom/recipes-images/angstrom ...
Jul 28 06:49:38 <bsder> However, I'd like to just compile the module directly on the BeagleBone rather than dealing with all of the transferring of files ...
Jul 28 07:08:05 <_av500_> scp
Jul 28 07:08:12 <_av500_> or nfs mount
Jul 28 08:27:26 <koen> or sshfs
Jul 28 10:39:07 <einball> hmm, a fresh angstom from narcissus won't have ethernet :P
Jul 28 11:05:40 <beagleBoard> Why the fuck is it so hard to get XBMC running on BB?
Jul 28 12:00:53 <mru> s/on bb//
Jul 28 16:24:50 <einball> I did a build with narcissus
Jul 28 16:25:06 <einball> And it works fine .. But somehow it can't bring up the interface
Jul 28 16:25:10 <einball> *eth0
Jul 28 16:26:00 <einball> Using the bb-xm
Jul 28 16:29:02 <thurbad> have you tried usb0?
Jul 28 16:30:06 <thurbad> the ethernet on the xM is attached to the usb controller
Jul 28 16:30:34 <einball> oh ... I thought usb0 is ethernet over the usb mini port.
Jul 28 16:31:01 <einball> That's embarrasing
Jul 28 16:31:06 <einball> thank you
Jul 28 16:31:07 <thurbad> only if you installed the gether driver
Jul 28 16:31:34 <thurbad> better to ask than continue to bang your head
Jul 28 16:34:31 <thurbad> at least that's my philosophy, many in here prefer the head banging approach :P
Jul 28 16:36:57 <einball> true
Jul 28 16:37:29 <einball> But I assume it annoys people to explain the same things over and over again
Jul 28 16:39:25 <einball> So I always try the head to table approach before I ask.
Jul 28 16:39:37 <thurbad> true
Jul 28 16:39:58 <thurbad> it's always best to try first
Jul 28 16:41:04 <einball> Anyway - Thanks for your help. I will have to take a break
Jul 28 16:41:46 <einball> I'm in switzerland and have german plugs. So I can charge my laptop or power the beagleboard .. :-)
Jul 28 16:41:55 <einball> *and only one adapter
Jul 28 16:42:18 <thurbad> eep
Jul 28 16:42:26 <thurbad> have a good one then
Jul 28 16:42:42 <einball> So .. Be right back! :-)
Jul 28 17:55:35 <DarthExpeditor> I want to start working with BeagleBoards. Starting as a total noob what would I need / want?
Jul 28 17:56:41 <gmpff> I started with a BeagleBone, SD card (with Angstrom) and Linux PC.
Jul 28 17:57:00 <gmpff> What you need beyond that depends on what you want to do.
Jul 28 18:03:33 <dm8tbr> yes, the bone is very easy to work with
Jul 28 18:10:08 <DarthExpeditor> I having totally decided where I want to go as my first project with it. I'm thinking of making a device to convert VGA and DVI to Ethernet (HTTP)
Jul 28 19:35:24 <einball>  Linux beagleboard 2.6.32 #3 PREEMPT Tue Jul 26 10:56:56 CEST 2011 armv7l GNU/Linux  \o/ works .. yippieh
Jul 28 20:09:44 <ozzzloy> i tried to join this channel with my nick ozzloy, but i get Cannot join channel #beaglebone (You are banned!)
Jul 28 20:10:07 <ozzzloy> i'm not sure why i'm banned, or how to fix it.  can i get help?
Jul 28 20:11:25 <niro> have you registered your name with nickserv?
Jul 28 20:12:34 <ozzloy> weird
Jul 28 20:12:45 <ozzloy> never mind, not sure wat hapn
Jul 28 20:12:51 <niro> ok
Jul 28 20:22:00 <ozzloy> is it possible to get the beaglebone to use my computer's internet through the usb cable?
Jul 28 20:22:49 <ozzloy> right now i have to plug in the usb and the ethernet cable and tell my computer to share the connection
Jul 28 20:23:09 <gmpff> if you have an internet connection from the BB to the PC and the PC can route and NAT, then yes.
Jul 28 21:03:14 <Odi> Hey guys, I've just managed to get internet working on the beagleboard C4 with a basic Angstrom Demo. I want to install gcc and openCV and as far as i know all i need to use is opkg command. I just want to know if there are any other important things i should install as well, maybe before gcc. Im trying to avoid having problems like installing something in the wrong order or something silly like that.
Jul 28 23:39:36 <mranostay> hmmm my first pcb design is back
Jul 28 23:40:09 <KeatonT> mranostay pics or it didn't happen.
Jul 28 23:40:10 <KeatonT> :P
Jul 28 23:41:18 <emeb> mranostay: where'd you get it fabbed?
Jul 28 23:43:20 <KeatonT> ^^
Jul 28 23:45:49 <KeatonT> Crap can't even remember the name of the company I used...
Jul 29 00:21:15 <alan_o> Nobody ever wants to admit where they got stuff made :)
Jul 29 00:23:31 <dj_pi> alan_o, are you looking for boardhouses?
Jul 29 00:43:41 <alan_o> dj_pi: not right this minute, but I have been in the past, and I may be in the future
**** ENDING LOGGING AT Sun Jul 29 02:59:58 2012