**** BEGIN LOGGING AT Fri Sep 14 02:59:59 2012 Sep 14 03:04:35 hmmmm Sep 14 03:56:59 hi Sep 14 03:58:24 hi Sep 14 03:59:04 any1 thr to assist me wrt beagle board Sep 14 04:35:21 where are the sources.list equivalent located in angstrom? Sep 14 04:38:45 nm, i found it: /etc/opkg Sep 14 05:28:07 Hello everybody, I did install Angstrom into BB-xM version Console Only Sep 14 05:28:29 How can I install X11 Gnome? Sep 14 05:35:26 opkg install task-base-extended angstrom-x11-base-depends angstrom-gpe-task-base angstrom-gpe-task-settings libesd0 Sep 14 05:35:32 From http://www.linuxtogo.org/gowiki/AngstromManual Sep 14 05:36:04 YOu may need xserver-kdrive or xserver-kdrive-imageon. Sep 14 05:37:25 thank you, agmlego. Let me try it. Sep 14 06:30:08 Hello agmlego, I did what you recommended. Sep 14 06:30:43 but when I reboot, the board still not display on the DVI-screen Sep 14 06:33:49 Dear everyone, I installed the Angstrom OS into BB-xM version Console ONLY. And I update X11 GUI opkg install task-base-extended angstrom-x11-base-depends angstrom-gpe-task-base angstrom-gpe-task-settings libesd0 but nothing displays on my DVI screen, just show on the console terminal via MINICOM Sep 14 06:34:34 Hi Sep 14 06:35:48 I want to build Android ICS or JB for Beagleboard xM with support for BeagleTouch (sold by liquidware). Has someone tried this or is ware of where we can get source ad build procedure Sep 14 06:48:46 Cuong: I recommend either trying the X11 image of Angstrom, or doing further online research. Sep 14 06:54:20 Dear Agmlego, I did try the x11 image but the boot stopped at uncompressing linux Sep 14 06:55:07 and I follow some instructions on the Internet, they recommend that I should install Console only first Sep 14 06:55:33 after that "you" can upgrade to X11 GUI Sep 14 06:55:59 but until now, nothing appears on the DVI-screen Sep 14 07:00:13 ::shrugs:: Sep 14 07:00:23 Try asking here during normal US working hours? Sep 14 07:01:11 :D thank you so much agmlego Sep 14 07:01:27 I try my best. Sep 14 07:02:31 Anyway, thanks. I myseft investigate because Im a newbei Sep 14 07:43:36 hi ! Sep 14 07:45:04 hi Sep 14 09:05:31 Hi. I can't get u-boot to read my uEnv.txt file on boot. I'm using the am335x_evm configuration. Should I patch the .h-file somehow ? Sep 14 09:05:58 Using u-boot-2012-07. Sep 14 09:12:11 I'm using a Beaglebone Sep 14 09:12:21 pastebin boot log Sep 14 09:12:28 assume we are not standing behind your shoulder Sep 14 09:18:25 the SRM has info on how to rebuild u-boot Sep 14 09:20:50 dont all default configs nwadays have uEnv.txt support enabled ? Sep 14 09:21:10 * ogra_ would have thought so ... but them i'm a spoiled ubuntu guy :) Sep 14 09:21:14 *then Sep 14 09:23:52 ogra_: the vendor trees don't have it Sep 14 09:24:01 ogra_: there's no am335x support upstream Sep 14 09:24:10 ogra_: well, only git master for uboot Sep 14 09:24:36 koen: if you but DT into a VT, what happens? Sep 14 09:25:04 depends on the VM Sep 14 09:26:36 time to push it upstream then, the bone is around for a while already :) Sep 14 09:27:17 ogra_: patches welcome Sep 14 09:27:34 av500, pfft ... i have linaro for patches :) Sep 14 09:29:52 bareboot Sep 14 09:41:24 Boot log is here: http://pastebin.com/gbt9ffdt Sep 14 09:41:42 I couldn't find any info on rebuilding U-boot for the Beaglebone in the SRM... Sep 14 09:42:40 that doesnt even seem to look for boot.scr Sep 14 09:46:09 maybe I should be looking for a beaglebone u-boot git tree Sep 14 09:46:10 kroon: it's right there in the "software support" section Sep 14 09:48:33 koen, ok, I see instructions on how to rebuild the Ã…ngstroem distribution using OE, but no specific u-boot instructions Sep 14 09:48:55 Guess I can dig further into how OE does it Sep 14 09:53:16 it's all built the same Sep 14 10:18:14 hehe Sep 14 10:18:34 * mdp relaxes and waits for linaro to make am335x patches Sep 14 10:18:41 lol Sep 14 10:21:53 mdp, they will get right to it after they unified the kernel to a single zImage for all SoCs ;) Sep 14 10:23:07 unified kernel comes after allwinner a10 mainline support Sep 14 10:23:14 and before unicorns Sep 14 10:23:23 nah, unicorns are first Sep 14 10:23:26 always ! Sep 14 10:23:37 I get my priorities messed up a lot Sep 14 10:23:44 heh Sep 14 10:29:32 panto, good afternoon. new plan...we're going to wait for linaro's patches for i2c-omap pinctrl support Sep 14 10:29:43 hi mdp Sep 14 10:29:52 too bad cause I got it working Sep 14 10:29:58 bah Sep 14 10:30:02 we could have waited!!! Sep 14 10:31:19 just waiting doesnt help anyway, you need to pull a number at the counter first Sep 14 10:31:36 they will call you up if there is a free agent :) Sep 14 10:31:46 I know "a guy", he'll let me bypass the queue Sep 14 10:31:48 family connections and all Sep 14 10:32:04 oh, helpful indeed ! Sep 14 10:32:50 are those linaro patches anywhere I can see them? Sep 14 10:33:10 I care not much about the i2c part, I mostly care about the capes Sep 14 10:33:42 no, they are virtual pacthes :) Sep 14 10:33:48 (we are just joking) Sep 14 10:33:58 panto, ogra_ is "linaro-bashing" Sep 14 10:34:06 ;) Sep 14 10:34:08 lol, nah Sep 14 10:34:09 hey, everyone has a hobby :) Sep 14 10:34:43 personally, I pursue quadricorns while everybody else is looking for garden variety unicorns Sep 14 10:35:19 you look for an indoor one to use as a coat hanger ? Sep 14 10:35:37 I garden with quadricorns :) Sep 14 10:37:50 excellent fertilizer after running them through the woodchipper Sep 14 10:39:10 ogra_, that would be nice...maybe a one cape-mounted quad on each side of the door Sep 14 10:39:14 * mdp makes a note Sep 14 10:57:50 http://pastebin.com/Mkk1cHxz Sep 14 11:20:05 mdp: haha allwineer Sep 14 11:20:26 av500, I read the "TRM" the other day ;) Sep 14 11:20:32 there is one? Sep 14 11:20:38 ;) Sep 14 11:21:09 http://rhombus-tech.net/allwinner_a10/A10_register_guide/ Sep 14 11:21:10 but there is a kernel, so who needs TRM Sep 14 11:21:15 exactly! Sep 14 11:21:19 TI has a TRM and still no kernel Sep 14 11:21:23 now click on the EMAC section of the "TRM" Sep 14 11:21:40 please help us document the part! Sep 14 11:21:41 there is a link to the driver Sep 14 11:21:47 yeah Sep 14 11:22:09 I believe this is a self-documenting part Sep 14 11:22:59 mdp: its an EMAC, connect it to the net and it will get docs via bootp Sep 14 11:23:09 or torrent them for you Sep 14 11:23:29 can you add these exact steps to the wiki plz? Sep 14 11:23:58 mdp: I even released GPL kernel code for A10 Sep 14 11:24:07 I am notifying gerald about this part in hopes we can have a beagle-AW RSN Sep 14 11:24:29 mdp: buy the cubieboard Sep 14 11:24:40 http://cubieboard.org/ Sep 14 11:24:47 will it bootp the docs too? Sep 14 11:24:59 sure Sep 14 11:25:08 yeah, that's what made me go look at how much info was available Sep 14 11:25:12 I'll pass Sep 14 11:25:19 I have nice A10 tablets here Sep 14 11:25:45 * ogra_ goes to customs to pick up his a10 tablet right now Sep 14 11:26:01 ogra_: you are doing it wrong Sep 14 11:26:07 why ? Sep 14 11:26:23 av500, A10 makes me feel infinitely better about our parts Sep 14 11:26:26 customs should bring it to you Sep 14 11:26:32 mdp: yes and no Sep 14 11:26:36 the sender forgot to attache the invoice so i need to eplain to them its a present and worthless :) Sep 14 11:26:41 *attach Sep 14 11:26:49 av500, except how we are over-engineered Sep 14 11:26:57 mdp: why is ogra_ picking up and A10 tablet? and not a TI one? Sep 14 11:27:03 -d Sep 14 11:27:13 av500, i have two TI tablets aleardy Sep 14 11:27:17 ogra_, you are taking food from the mouths of my chilluns'! Sep 14 11:27:26 * mdp has a tegra tablet ;) Sep 14 11:27:33 that too :) Sep 14 11:27:37 and a tegra netbook Sep 14 11:27:39 mdp: yes, hungry makes them stay focused Sep 14 11:27:55 * av500 has a DM6441 "tablet" Sep 14 11:28:12 indeed...they'll eat again when they graduate and get a job Sep 14 11:28:16 though nothing beats my sabre mx6 yet Sep 14 11:28:16 yep Sep 14 11:28:47 (quad core 1.2GHz, 1GB , SATA (!) ) Sep 14 11:29:12 panto: which part was our powerpc android port on again? one of the 85xxs...that's the tablet I want Sep 14 11:29:12 anyway, out to customs Sep 14 11:29:33 yes, p1022ds IIRC Sep 14 11:29:42 ahh, yes, that was it Sep 14 11:29:51 mdp, not very portable with that power consumption ;) Sep 14 11:29:55 bah Sep 14 11:30:15 smaller than those old compaq luggables! Sep 14 11:30:26 lol Sep 14 11:30:44 the perfect laptop (for Arnold at his prime) Sep 14 11:31:25 * av500 has this: http://www.teknism.com/2012/09/osborne-1-laptop.html Sep 14 11:31:31 it even works Sep 14 11:32:00 isn't that the one you found in the dumpster? Sep 14 11:32:03 yep Sep 14 11:32:08 http://soundcloud.com/boned-cake/8-bit-never-gonna-give-you-up Sep 14 11:32:13 my uncle used to lug one of those around .us to sell his plastic tubing extrusion control system to factories...was an awesome demo back in the 80s Sep 14 11:32:36 mdp: this one was used for NC control Sep 14 11:33:09 same era of machine Sep 14 11:33:58 mdp: I am told, even people inside allwinner need to use VNC to access the TRM :) Sep 14 11:34:26 and you had enough expansion room to insert your ISA data acquisition/control card to get ultrasonic sensor info ;) Sep 14 11:35:01 av500, I assumed they just read the gpl source that has all details clearly documented Sep 14 11:35:28 * mdp becomes distracted again by the notion of an ISA-cape Sep 14 11:40:03 * av500 notes that mdp is a cape Sep 14 11:42:27 * mdp sulks Sep 14 11:42:59 make a HASA-cape Sep 14 11:47:38 lumdidum Sep 14 12:00:05 gm all Sep 14 12:02:42 hi jkridner Sep 14 12:03:09 wb, boris Sep 14 12:05:31 gm Sep 14 12:07:27 gm Sep 14 12:08:46 I managed to patch the .h-file to respect uEnv.txt, define CONFIG_SYS_HUSH_PARSER, CONFIG_CMD_RUN and fixing up CONFIG_EXTRA_ENV_SETTINGS and CONFIG_BOOTCOMMAND similar to omap3_beagle.h Sep 14 12:20:25 kroon yes nothing fancy Sep 14 12:22:50 http://www.reichelt.de/Kunststoffgehaeuse-TEKO/TEK-BERRY/3//index.html?ACTION=3&GROUPID=3354&ARTICLE=124752 Sep 14 12:24:33 av500, didn't you hear, koen is now in the 3d printing business, you can get anything you need Sep 14 13:42:21 http://www.quora.com/BeagleBoard-1/What-are-people-making-with-BeagleBoards Sep 14 13:42:44 * mru makes money Sep 14 13:44:30 mru: ill take 50 £100 notes please Sep 14 13:45:20 is there a £100 note? Sep 14 13:45:25 * mru has never seen one Sep 14 13:45:37 even the £50 is rare Sep 14 13:46:01 mru: there is issued in Scotland Sep 14 13:46:15 all 500€ notes are in spain Sep 14 13:46:16 mru: I think in a year on tills I took 2 of them! Sep 14 13:46:16 those crazy scots Sep 14 13:46:43 although £100 was enough money for 1 of everything in poundstretcher :-D Sep 14 13:46:44 av500: wow, has the euro dropped that low? Sep 14 14:10:56 koen: DRV8814? Sep 14 14:11:01 bells ring? Sep 14 14:19:26 motor driver Sep 14 14:19:39 I looked at the 883x a while ago Sep 14 14:52:06 mru: well i heard back from the hotel, they did confirm my reservations.... Sep 14 14:59:12 prpplague: wow Sep 14 14:59:49 mru: the contact did respond that the number of rooms was getting low, so i would suggest getting your reservation in asap Sep 14 15:02:41 * av500 thinks mru needs a low number of rooms only Sep 14 15:03:28 1 Sep 14 15:03:58 prpplague, ugh Sep 14 15:04:04 * mdp emails boss yet again Sep 14 15:08:18 prpplague: where did you email the form? Sep 14 15:08:47 the address written in the form or the address it is hyperlinked to? Sep 14 15:08:51 yes, they are different Sep 14 15:08:59 mru: cristina_lozano@fira-palace.com Sep 14 15:13:59 underscore between names is so hotmail Sep 14 15:15:10 hehe Sep 14 15:16:51 \o/ elce reservations Sep 14 15:18:50 indeed Sep 14 15:19:39 a.k.a. "been there, done that" Sep 14 15:20:19 LetoThe2nd: hehe Sep 14 15:29:39 http://oreedesign.com/ Sep 14 15:39:29 av500: better watch out, the US federal government will be all over that like they were on Gibson Sep 14 15:39:44 Mel? Sep 14 15:40:44 william? Sep 14 15:40:52 http://artsbeat.blogs.nytimes.com/2011/08/31/famed-guitar-maker-raided-by-federal-agents/ Sep 14 15:40:59 I used to work with a guy called william gibson Sep 14 15:41:53 koen: be happy i didn't buy any new TI red shirts Sep 14 15:42:01 koen: black blue and white Sep 14 15:42:52 prpplague: serves them right for using unamerican wood Sep 14 15:42:52 those are the colours of estonia Sep 14 15:43:54 cant have the rain forect decimated by all the amateur guitarists Sep 14 16:10:19 prpplague, I was only assigned a navy blue TI shirt...I feel totally left out. Sep 14 16:10:46 mdp: hehe, well i have to purchase my own, so it is insult on top of injury Sep 14 16:10:51 lol Sep 14 16:10:56 sorry :) Sep 14 16:11:34 I shall try to remember to wear my "rockin' penguin Sitara" marketing t-shirt at elc Sep 14 16:11:56 hehe Sep 14 16:12:05 it's a very busy t-shirt...marketing couldn't limit their words...as usual Sep 14 16:12:50 mdp: HA Sep 14 16:13:25 mdp: as long as it doesnt include the words synergy or paradigm.... Sep 14 16:14:08 it has "revolution", that's awfully suspect Sep 14 16:15:02 hehe Sep 14 16:16:22 one could say that a revolution would be more like not being OMAP-compatible and not using an ARM core either. ;) Sep 14 16:16:55 but I'm probably going to get in trouble for these words now Sep 14 16:17:17 lol Sep 14 16:17:20 infidel! Sep 14 16:17:30 where do you have your embassy to storm it? Sep 14 16:17:56 hum, there's a build system bug Sep 14 16:18:06 the .dtsi files are not counted as dependencis Sep 14 16:18:09 *dependencies Sep 14 16:23:34 panto, probably because appended dtb is a hack and not considered a dependency Sep 14 16:24:05 who cares it's a hack, it's useful Sep 14 16:24:28 oh, but I guess the updated .dts does work as a dependency Sep 14 16:24:37 in that mode Sep 14 16:24:40 hrmph Sep 14 16:38:57 koen: is there a way to trigger the screen calibration? I get it to show up some times on boot, but not others and I'm not sure what triggers it. Sep 14 16:42:46 rm /etc/pointercal Sep 14 16:42:57 or select it from the menu Sep 14 16:43:03 system -> admin -> calib Sep 14 16:44:32 jkridner__: if there's no (or empty) pointer call && /dev/input/touchscreen0 is present it will pop up a calibration Sep 14 16:45:38 thanks. 'rm /etc/pointercal.xinput' Sep 14 16:46:36 koen: no chance that "VIDIOC_REQBUFS: Cannot allocate memory" can be fixed by allocating video memory, is there? Sep 14 16:46:54 no, it's a v4l thing Sep 14 16:46:56 ah, dmesg shows cssp-camera cssp-camera: dma_alloc_coherent of size 0 failed Sep 14 16:47:09 that's the bug I reported to QL Sep 14 16:47:20 they see it as well Sep 14 16:47:44 jkridner__: after giving a student the link to the stache code: "Oh jadonk, I follow him on twitter" Sep 14 16:47:57 jkridner__: you're a famous twitter person! Sep 14 16:48:19 "some famous twitter people . . ." Sep 14 16:49:00 * koen also mentioned "Ruth Chris" a few times to dallas based people Sep 14 16:49:20 although I suspect it will end up with me taking people to dinner instead of the reverse :) Sep 14 16:50:17 koen: is that an invitation? Sep 14 16:50:31 yes, it is Sep 14 16:50:51 it does involve me being in dallas Sep 14 16:55:10 does that invite work for me too? :-) Sep 14 16:55:37 yes Sep 14 16:55:47 TI people think you work in dallas, btw Sep 14 16:56:05 everybody works in dallas Sep 14 16:56:24 if you work for TI, you work in dallas Sep 14 16:56:30 even if you don't work in dallas Sep 14 16:56:37 there are no exceptions Sep 14 16:57:07 * mdp also wants in on Ruth's Chris Sep 14 16:58:13 koen, did I hear you say you were buying? Sep 14 16:58:44 koen: I know. I don't bother to correct them very often. Better for the career. Sep 14 16:59:15 koen: hmmm, the icons on the screen used to wrap-around to fit, now they are down below the bottom (used the SD card on a larger LCD). Sep 14 17:02:04 jkridner__: which icons? Sep 14 17:02:14 * koen needs to unpack the dvi monitor soon Sep 14 17:02:18 i am new to the beagle board environment, is there any tutorial on how to create an audio tone and put it out to speakers Sep 14 17:02:27 trash and a couple of .desktop files I created (x11vnc.desktop and stache.desktop) Sep 14 17:02:30 Guest69099: it's standard linux Sep 14 17:03:08 jkridner__: thanks for reminding me, I have a half-baked patch to re-enable x11vnc autostart Sep 14 17:03:27 anyone? Sep 14 17:03:56 Guest18589: https://ccrma.stanford.edu/wiki/Stompbox_2012 might be helpful Sep 14 17:04:10 Guest69099: speaker-test -t sine Sep 14 17:04:32 thank you Sep 14 17:05:07 I dunno how this exactly works, but I was wondering if anyone knows if the I/O switching speed of the BeagleBone can reach 3mhz Sep 14 17:05:50 what are we bitbanging today? Sep 14 17:06:09 * mdp perks up at bitbanging Sep 14 17:06:48 * mdp wonders what "I/O switching speed" means in this context Sep 14 17:07:15 * mru guesses gpio toggle rate Sep 14 17:07:16 you can switch up to 66MHz using PRU Sep 14 17:07:33 not saying the hw will support that, but that's the theoretical sw limit Sep 14 17:07:36 Well, I am not all well-versed in these matters Sep 14 17:07:37 Guest18589: you should have found https://ccrma.stanford.edu/wiki/Stompbox_Lab_0 Sep 14 17:07:44 then https://ccrma.stanford.edu/~eberdahl/Satellite/ Sep 14 17:07:56 tells you where to download their image Sep 14 17:08:28 But I have a group wishing to use the BeagleBone to toggle a laser on/off at a rate of 3mhz Sep 14 17:09:04 wosu: very doable with PRU. http://blog.boxysean.com/2012/08/12/first-steps-with-the-beaglebone-pru/ Sep 14 17:09:34 * jkridner__ isn't afraid to google for people who don't know what search terms to use or how to recognize quality pages from distractions Sep 14 17:10:07 wosu: use the PWM for that, I think that goes up to 5MHz, but check the TRM Sep 14 17:10:58 ah nice compiling in the bone Sep 14 17:11:00 wosu, just switching...no work to be schedule during on/off phases? Sep 14 17:11:42 jkridner__: give a man a url and you inform him for a day, teach a man to google and you inform him for a lifetime Sep 14 17:12:07 also, lmgtfy.com Sep 14 17:12:20 lmgtfy is a great solution. Sep 14 17:12:53 * jkridner__ tries to google for how to get gnome to wrap my icons on the desktop Sep 14 17:12:57 The goal of our project is to be able to project letters using the BeagleBone-controlled laser using an array of points. The laser will simply to toggled on/off while a pair of galvanometers direct the beam Sep 14 17:13:41 wosu, so yes, in that case you use the h/w pwm to generate your pulse at the desired freq/dc as koen suggested Sep 14 17:14:25 Alrighty, thanks everyone. I will bounce this around with the group. Have a good weekend! Sep 14 17:14:28 you'd use the pru like jkridner__ said if you want to do some deterministic processing in between Sep 14 17:14:32 or a combination of both Sep 14 17:14:44 Oh...okay, will save this convo as reference, haha Sep 14 17:15:02 right, if you wanted to do something like turn on or *not* turn on at a given interval based on some data. Sep 14 17:16:18 Honestly, without my group here I cannot be too certain of the process at length. But, I am pretty certain I'll be back here for more help in the coming weeks. Again - thanks for the insight and I'll try to google better first next time Sep 14 17:18:44 I think we can close that support ticket. good job, team! Sep 14 17:19:39 jkridner__: something I just found by accident: http://www.googleguide.com/ Sep 14 17:21:21 interesting Sep 14 18:18:24 hmmm Sep 14 19:47:28 hello, i am booting a angstrom image from narcissus for a beagleboard c3. The boot messages appear but i don't get a login prompt. I connect to the beagle for serial port and the kernel is 3.2.8 Sep 14 19:49:48 is the login prompt disabled for the last version? Sep 14 19:50:38 i don't get the logo Sep 14 20:06:12 do you get any prompts from the beagleboard? Sep 14 20:06:39 brolin: ^^^ Sep 14 20:17:17 nothing Sep 14 20:18:02 check that your uEnv.txt has the right serial port name for the console Sep 14 20:18:02 djlewis: the process freeze on See 'systemctl status systemd-tmpfiles-setup.service' for details. Sep 14 20:18:33 ah ok, i get all the booting messages Sep 14 20:18:49 but don't get the angstrom logo and the login prompt Sep 14 20:21:23 i have long time without working with the beagle and trying a new version of angstrom i am getting a lot of troubles Sep 14 20:26:38 another question, what changed from kernel 2.6 to kernel 3 that the usb internet now don't works? Sep 14 20:28:51 works here Sep 14 20:29:47 uhmm Sep 14 20:31:02 i setup a dhcp server in my laptop and don't get response to the request from the beagle? Sep 14 20:31:19 first i install the module g_ether Sep 14 20:32:33 and static network setup neither works Sep 14 20:34:10 does the network interface show up on both ends? Sep 14 20:34:19 yes Sep 14 20:34:41 but i don't know what happens Sep 14 20:34:50 maybe you have a firewall on the laptop blocking traffic Sep 14 20:34:59 x-over cable to laptop? Sep 14 20:35:13 but is usb Sep 14 20:35:17 djlewis: this is otg Sep 14 20:35:27 * djlewis goes back to sleep now :) Sep 14 20:35:41 besides, I haven't seen a non-auto-direction ethernet port in a very long time Sep 14 20:37:42 i need another module? Sep 14 20:38:07 if the usb0 interface shows up on both sides, all's well Sep 14 20:38:25 laptop running linux? Sep 14 20:38:46 yes, archlinux Sep 14 20:39:18 try running "tcpdump -np -i usb0" on the laptop while doing dhcp on the beagle Sep 14 20:39:45 oh, you also need to configure an address for it on the pc side Sep 14 20:40:09 before the beagle does dhcp Sep 14 20:40:36 ok Sep 14 20:43:31 end of the world is comming :D http://bit.ly/SlNALt Sep 14 20:44:33 the end of the world has been coming since the beginning of time Sep 14 20:45:31 * djlewis see's his fav whiskey over the big pond. Sep 14 20:45:51 mru: i got bytes from the beagle Sep 14 20:46:17 but i don't a correct response Sep 14 21:21:30 I have my beaglebone powered by the 5V connector. It does not recognize any USB devices plugged into the USBA host port on the board, checked with lsusb command. I am running the angstrom image from the bone page. Sep 14 21:26:52 what devices? Sep 14 21:43:38 My target device is a board with a PSoC5 core and a FX2LP USB core on it, rated for 6mA and 85mA respectively. Sep 14 21:47:43 low, full, or high speed? Sep 14 21:48:16 high speed Sep 14 21:50:14 heh what is next? Sep 14 21:50:19 ultra-high? :) Sep 14 21:50:37 whatever usb3 calls it Sep 14 21:50:47 usb3 calls it super speed Sep 14 21:50:57 this is a high speed usb 2.0 core Sep 14 23:50:54 Good evening. Sep 14 23:53:37 Not new to building things in Linux, but a bit new to embedded Linux. I'm glad the beagle's a forgiving system where you can just re-dump to the SD card if you need to. Sep 15 00:29:16 hmmm who makes a Linux board with only OTP memory? Sep 15 01:43:48 beagle my be forgiving but the trolls aren't Sep 15 02:43:24 Hello, I've just connected a Beaglebone Rev.A6 to my Macbook Air running OSX Mountain Lion. However, I don't see a device to connect to in /dev. Anyone know what I need to do to get a terminal running? Sep 15 02:46:18 http://google.com/search?q=beaglebone+mountain+lion **** ENDING LOGGING AT Sat Sep 15 02:59:59 2012