**** BEGIN LOGGING AT Sun Feb 03 02:59:59 2013 Feb 03 03:05:36 I had an NFS server running on my BeagleBoeard C3 for a while (but due USB instability, nowadays I'm running it on a rpi instead) Feb 03 03:08:27 But configuring NFS is not dependant on the platform, rather on the distro you're running. Feb 03 03:08:42 My configuration on arch : https://andre.blaatschaap.be/2012/11/archlinuxarm-on-the-raspberry-pi-part-3/ Feb 03 03:21:11 AndrevS, I took at look at your page. The problem is, I think things are missing that need to be installed Feb 03 03:21:22 on the BB. This command Feb 03 03:21:27 systemctl start nfsd.service rpc-idmapd.service rpc-mountd.service rpcbind.service Feb 03 03:21:57 completely failed on my board, the return message saying that those items were missing. Feb 03 03:24:37 I should add that I'm using the stock Angstrom distribution that came with the board. Feb 03 03:27:49 My guide is for ArchLinuxARM. I have no experience with the Ångström distro. But I have a guide how to install Arch on my blog as well. (BeagleBoard C3, so "classic") ( https://andre.blaatschaap.be/2013/01/installing-archlinuxarm-on-the-beagleboard/ ) Feb 03 03:28:16 But again, how to configure it is more distro-specific then platform-specific Feb 03 03:33:45 I'm working with a BeagleBONE, not BeagleBoard. do you think that distro would load? I have plenty of SD cards os Feb 03 03:33:54 that might be worth a try. Feb 03 03:40:44 Arch has support for bone as well, but you'll need a different tarball. Since I have no bone byself, so I can't speak from my own experience. Feb 03 03:41:50 But the bone is officially supported ( http://archlinuxarm.org/platforms/armv7/beaglebone ) Feb 03 03:41:57 I use debian, and it works Feb 03 03:42:18 Anyways.... looking at the time, it's getting near 5 AM.... perhaps I should go to bed.... Feb 03 03:50:49 [quit] Feb 03 03:50:54 exit Feb 03 03:51:17 exit Feb 03 04:08:54 hehe Feb 03 04:31:04 mranostay: congratulations on the geiger counter cape Feb 03 04:41:06 mranostay: did you go to some conference as well Feb 03 05:08:05 nope Feb 03 05:16:26 howdy sakoman Feb 03 05:16:54 howdy mranostay! Feb 03 08:14:59 <_av500_> howdy Feb 03 08:50:07 morning Feb 03 08:58:44 *yawn* another day at FOSDEM Feb 03 08:58:54 how was the eudev talk? Feb 03 08:59:25 didn't go Feb 03 08:59:33 missed out eh? Feb 03 09:00:00 ye Feb 03 09:00:32 wonder if there is a video Feb 03 09:00:51 no idea Feb 03 09:01:13 is anyone from lwn there in an "official" role? Feb 03 09:02:40 http://www.linux-magazin.de/NEWS/FOSDEM-2013-Schokolade-fuer-Poettering-und-GKH-von-Eudev Feb 03 09:04:19 https://www.linux-magazin.de/var/linux_magazin/storage/images/media/linux-magazin/images/_mg_2961_web/858006-1-ger-DE/_MG_2961_web_lightbox.jpg Feb 03 09:04:24 I like the gregkh pic Feb 03 09:16:12 <_av500_> Russ: eudev was like shooting fish in a barrel Feb 03 09:16:24 <_av500_> poor guys did not stand a chance Feb 03 09:16:37 <_av500_> but badly preprared talk is badly prepared Feb 03 09:16:53 they did bring chocolate though Feb 03 09:17:19 <_av500_> ha, I'm behind the guy in the red jacket in the 2nd pic :) Feb 03 09:24:01 so I'm using OE to build angstrom images for my 'bone. I've got this USB 3G modem I'm playing with that uses the hso kernel module. Feb 03 09:24:41 in angstromv2012.05 everything is grand. When I build with angstromv2012.12 the module detects the modem, opens up the serial ports and everything, but the modem refuses to connect to the network Feb 03 09:24:58 I've noticed one or two others reporting the same thing Feb 03 09:25:30 I suspect it's a change in the module over those 7 months. Any ideas on where to check what might have changed, or who to tell? Feb 03 09:26:18 I saw that there was a commit to the main linux kernel dealing with link power management about 10 months ago. Not sure if that has any effect on this or not. Feb 03 09:27:30 check the network manager/modem manager code base Feb 03 09:27:38 they deal with all kinds of quirks Feb 03 09:28:46 right now I'm just messing with AT over the tty the module opens up. Does the network manager touch that? Feb 03 09:32:56 networkmanager/modemmanager does connect to the network Feb 03 10:00:03 FOSDEM! Feb 03 10:02:53 * dm8tbr is now in janson, see how mozilla does the wider marketing of FxOS Feb 03 10:30:35 <_av500_> dm8tbr: any good? Feb 03 10:31:29 _av500_: haven't seen such a botched presentation in a long while Feb 03 10:32:16 <_av500_> oh Feb 03 10:34:31 one of the lessons: don't let your 'tech leads' present things Feb 03 10:35:07 they didn't get the laptop hooked up and are now showing unreadable slides from a phone lying under a camera... Feb 03 10:35:17 <_av500_> lol Feb 03 10:35:53 all you can read is the heading... Feb 03 11:05:11 * XorA|FOSDEM laughs at artists stickering their laptops Feb 03 11:15:59 LetoThe2nd: ping Feb 03 13:19:09 XorA|FOSDEM: pong Feb 03 13:47:52 XorA|FOSDEM: unfortunately it looks like i won't have any time to poke you in person this fosdem :( Feb 03 14:01:05 <_av500_> LetoThe2nd: did you not see him at breakfast?? Feb 03 14:03:38 LetoThe2nd: you have left Feb 03 14:03:43 ? Feb 03 14:13:50 _av500_: probably, but as noone introduced us i don't recognize his face :/ Feb 03 14:14:33 XorA|FOSDEM: nope - enjoying the q3 vm right now, then uefi and after that we'll leave Feb 03 14:18:47 LetoThe2nd: watching replicant talk at moment Feb 03 14:19:06 XorA|FOSDEM: ah Feb 03 14:19:12 <_av500_> XorA|FOSDEM: ask them if it can do wifi Feb 03 14:19:30 _av500_: it looks like they cannot from the slide just put up :-D Feb 03 14:19:39 <_av500_> :) Feb 03 14:19:51 seem to know every little about how most of the phones work Feb 03 14:20:08 XorA|FOSDEM: problem is that after the current talk i'll run over to jansson and after that be gone Feb 03 14:20:26 <_av500_> LetoThe2nd: what is in janson? Feb 03 14:20:28 its like watching a guy who is an expert in PCI talk about arm based phones Feb 03 14:21:15 _av500_: i'll meet jan @ janssons (no pun intended), we'll go to uefi @ k1.1105 and leave after that Feb 03 14:21:33 LetoThe2nd: what time at Janson? Feb 03 14:21:56 XorA|FOSDEM: q3 finished early, i'll run over to lameere :) Feb 03 14:22:14 see you in a second. where are you sitting? Feb 03 14:22:27 LetoThe2nd: Im almost at back on left, my GF is beside me Feb 03 14:22:34 check. Feb 03 14:22:36 LetoThe2nd: this is a defining feature in FOSDEM :-D Feb 03 14:23:18 LetoThe2nd: left will be right facing up the stairs :-D Feb 03 14:24:04 look for bright pink netbook case Feb 03 14:25:01 These guys really hate shared memory Feb 03 14:25:16 <_av500_> XorA|FOSDEM: ?? Feb 03 14:25:33 _av500_: every time he has mentioned shared memory it has been in the negative Feb 03 16:49:49 Hi, anyone help me with low cpu speed on ubuntu 12.10 on my bb-xM - currently BogoMIPS = 165! Feb 03 16:53:14 m0dts: cpu speed is dynamic Feb 03 16:54:03 XorA|beers: ok, so this will change as i run apps? currently just idling.. Feb 03 16:55:27 BogoMIPS is not a benchmark. Feb 03 16:56:03 Hm. Feb 03 16:56:13 I wonder if I should use Qemu for kernel bringup. Feb 03 16:56:54 I'm not sure if it's going to be easier than using an actual Beagleboard with JTAG and serial. Feb 03 16:58:32 agmlego: is there another way to tell? since i moved from angstrom to ubuntu all process i'm doing with ffmpeg are significantly slower than they were before the chage. Feb 03 16:59:03 m0dts: Check the CPU governor. Feb 03 16:59:25 Could be Ubuntu incorrectly detected the board as a laptop and has the ondemand governor in place. Feb 03 16:59:40 Which tends to make machines a little slower but more power efficient. Feb 03 17:00:36 thanks i will look into it Feb 03 17:03:20 cpufreq-info should tell you a *lot* about how your processor is behaving at any given time. Feb 03 17:04:36 yes just tried that - currently 300MHz with ondemand profile, much more useful..thanks Feb 03 17:06:48 Angstrom default governer should be ondemand Feb 03 17:10:37 i will now go do some tests.. tnx for tips. Feb 03 18:12:55 Also, omap3 bootrom is annoying. Feb 03 18:41:19 urg Feb 03 18:41:35 I need beer Feb 03 19:04:23 greetings from the train out of FOSDEM Feb 03 19:12:19 Ugh, I need to compile Linux fdisk for OSX. Feb 03 19:12:51 Because it seems that OSX's instrumentation is incapable of creating anything that the OMAP3 bootrom can boot off. Feb 03 19:14:01 I dub thee ... crapdisk! Feb 03 19:49:59 Kristina: I've thought, that there's something like mac-ports/homebrew... Feb 03 19:50:21 Meh, easier to build my own. Feb 03 19:51:17 I need two partitions, a FAT partition to store the MLO and the second stage and an HFS+ partition for "everything else". Feb 03 19:51:37 and OSX's fdisk isn't working? Feb 03 21:32:12 Okay, this is driving me insane. Feb 03 21:32:35 It's been two hours and I still can't create that bloody image ... Feb 04 01:42:27 stangely quiet in the shire Feb 04 02:52:08 everyone is travelling home now Feb 04 02:54:36 or has gotten eaten by trolls Feb 04 02:56:20 mmm.. trolls **** ENDING LOGGING AT Mon Feb 04 02:59:59 2013