**** BEGIN LOGGING AT Sun Apr 21 02:59:58 2013
Apr 21 03:13:31 <prpplague> anujdeshpande: something like a Bacon Board would be a good start
Apr 21 03:13:33 <prpplague> anujdeshpande: along with a beaglebone
Apr 21 03:13:51 <prpplague> anujdeshpande: you planning to do GSoC?
Apr 21 03:16:37 <anujdeshpande> prpplague, Yes for the Gsoc. I was talking with jkridner|work about the same. something like implementation + testing and packaging of the libraries available for Arduino that would be available in /usr/lib ..
Apr 21 03:16:47 <mranostay> prpplague: mmm i had bacon this evening
Apr 21 03:17:04 <mranostay> <-- annual cook whatever you have in your fridge before moving
Apr 21 03:17:36 <prpplague> mranostay: hehe
Apr 21 03:18:08 <prpplague> anujdeshpande: basically you need something that can do the core functions, digital read/write analog read/write
Apr 21 03:18:15 <anujdeshpande> I wanted to ask you how I could go on with the proposal. I would like to prioritize the available libraries based on benefit and toughness .
Apr 21 03:18:37 <anujdeshpande> prpplague, I have dso nano. But I am not sure whether that'll be enough
Apr 21 03:18:46 <prpplague> anujdeshpande: the example sketches that ship with arduino/energia are the ones to look
Apr 21 03:18:57 <prpplague> anujdeshpande: dso nano is good to use for debugging
Apr 21 03:21:09 <crashovrd> howdy
Apr 21 03:21:24 <anujdeshpande> prpplague, also one would test this on the beagle bone and xm right ? I currently only have the xm with me..
Apr 21 03:21:39 <crashovrd> i got a few questions about beaglebone2 that i could not find answered in the information presented thus far
Apr 21 03:22:03 <crashovrd> the resolution max over hdmi is listed as 1280x???? max
Apr 21 03:22:23 <crashovrd> can it be pushed to 1360x768 which is the native res of many panels?
Apr 21 03:23:13 <crashovrd> also, i am unclear as to whether is has the TI DSP and associated HD video playback capabilities?
Apr 21 03:23:39 <crashovrd> does it have OpenMax support for 720p h264 video playback?
Apr 21 03:24:22 <prpplague> anujdeshpande: yea
Apr 21 03:25:18 <anujdeshpande> prpplague, alright thanks !
Apr 21 03:25:45 <crashovrd> and finally, the TI documents states "Industry Standard API Support of Direct3D Mobile, OGL-ES 1.1 and 2.0, OpenVG 1.0, and OpenMax "
Apr 21 03:26:12 <crashovrd> does it actually have OpenVG support? i thought that was removed from the driver set.
Apr 21 04:52:36 <_av500_> ahoi
Apr 21 05:22:18 <ka6sox> moin _av500_
Apr 21 07:31:29 <mranostay> hi florian
Apr 21 10:00:18 <_av500_> mranostay: back from IKEA?
Apr 21 10:03:16 <ka6sox> sawdust and formaldehyde
Apr 21 10:04:05 <_av500_> but the best
Apr 21 10:05:42 * koen has just cleaned up the saw- and drilldust at home 
Apr 21 10:05:57 <koen> makerbot is a lot quieter now with 2x 80mm fans instead of a single 40mm one
Apr 21 10:06:56 <ka6sox> the cupcake we had at the space made the most annoying sound....guess thats why we put it in the cabinet and closed the door.
Apr 21 10:08:02 <koen> this is a replicator
Apr 21 10:08:07 <koen> needs active cooling on the mainboard
Apr 21 10:08:38 <koen> a cupcake idling is quiet
Apr 21 10:08:52 <koen> a replicator idling sounds like a angry hornet escaped from jurassic park
Apr 21 10:09:23 <ka6sox> not something I would went in my bedroom
Apr 21 10:10:24 <koen> nope
Apr 21 10:11:17 <koen> it's in the office, which is the top floor
Apr 21 10:11:38 <koen> if you pay attention you can hear it printing in the bedroom when all the doors are open
Apr 21 10:11:50 <koen> a lot less now with the firmware that has acceleration support
Apr 21 10:12:39 <koen> ka6sox: http://www.youtube.com/watch?v=LfTCckOHc4Q
Apr 21 10:13:53 <dv__> Hi guys ..where i can buy the beaglebone black ?
Apr 21 10:14:22 <koen> digikey, in ~2 weeks from now
Apr 21 10:14:26 <koen> and others
Apr 21 10:15:13 <ka6sox> koen, the accel stuff still can't get rid of the clicks when you stop...but its a lot quieter than before.
Apr 21 10:15:52 <dv__> thanks
Apr 21 15:43:19 <ka6sox> mourning
Apr 21 15:43:34 <mru> moaning ka6sox
Apr 21 15:44:30 <ka6sox> that too
Apr 21 16:03:14 <ka6sox> okay, at least this cup of coffee isn't awful like the 3am cup...
Apr 21 16:47:14 <mranostay> ka6sox: you sleep? at all?
Apr 21 16:47:52 <ka6sox> mranostay, I just work up at 3am...wanted a cup of coffee and regretted it.
Apr 21 19:21:21 <NG_> Hello everyone, I had a quick question.  Will there be an official kernel 3.8 release for the original beagle bone, or can I use the beagle bone black image.
Apr 21 19:21:50 <woglinde> ?
Apr 21 19:22:26 <woglinde> what is offical?
Apr 21 19:22:44 <NG_> woglinde. I saw the official site for beagle bone black is up including the image, but the instructions say it flashes the eMMC
Apr 21 19:24:10 <NG_> by official I mean an image that can be downloaded from circuit co or beagle board org that can be flashed to the beagle bone uSD
Apr 21 19:25:11 <NG_> so an angstrom distribution with 3.8
Apr 21 19:30:08 <NG_> also why is the image 2012-4-13?
Apr 21 19:33:26 <koen> NG_: there you go: http://dominion.thruhere.net/koen/angstrom/beaglebone/Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.04.13.img.xz
Apr 21 19:33:35 <koen> the official beaglebone build from angstrom
Apr 21 19:33:45 <NG_> Thank you koen!
Apr 21 19:35:17 <Turl> hi koen
Apr 21 19:36:04 <Turl> koen: I saw that you maintain all the kernel patches on the beagleboard github
Apr 21 19:36:45 <Turl> koen: I'm interested in working on upstreaming it as part of GSoC
Apr 21 20:29:27 <cwicks> good morning beagle board
Apr 21 20:42:04 <koen> heh
Apr 21 20:42:17 <koen> someone arguing with mru that the am335x lacks an fpu
Apr 21 20:42:41 <koen> I think that dude is trying to say "mixing hardfp binaries on softfp rootfs doesn't work"
Apr 21 20:45:15 <mru> usually the linker will refuse
Apr 21 20:45:58 <cwicks> hi - sorry to use the IRC for non-techie stuff - but has anyone seen the cute animated beagle stepping out of the limo?  I now can't find it on a URL
Apr 22 01:36:05 <TEP> Hi everyone.  Does anyone know the location of the analog devices in the latest image (3.8.6)?  I use to access them through /sys/devices/platform/tsc/ain1 (for example)
Apr 22 01:59:54 <salty_> I am having an issue with a beaglebone rev A6a that i recently purchased. Tried to install Angstrom-Cloud9-IDE-eglibc-ipk-v2011.11-core-beagleboard-2011.11.21. on the sd card. Now it does not boot (the pwr led lights up and stays on, but none of the usr led's light up like they used to) any ideas?
Apr 22 02:45:03 <salty_> i take that back, got the latest image, and it boots again. durp.
Apr 22 02:50:39 <gab_> i have googled around where to buy to black Bbone. is it just not available yet?
Apr 22 02:54:25 <ka6sox> in 2 minutes on a sunday night you expect an answer.... No answer for YOU!
Apr 22 02:59:54 <prpplague> ka6sox: 2minutes? we demand 1:32, with biscuits and tea!
**** ENDING LOGGING AT Mon Apr 22 02:59:58 2013