**** BEGIN LOGGING AT Thu Sep 19 02:59:59 2013 Sep 19 03:39:38 hello Sep 19 03:54:09 hi i had a question how to send email from a beaglebone black Sep 19 03:54:49 try a mail client Sep 19 03:55:14 looks like there is no smtp for beagle bone Sep 19 03:57:03 <_av500_> opkg update Sep 19 03:57:05 <_av500_> opkg list Sep 19 03:57:06 anybody out there know how to send email from a beaglebone black Sep 19 03:58:23 <_av500_> opkg install Sep 19 04:00:02 any estimates on what ratio of questions aren't even beaglebone black questions? Sep 19 04:00:03 is there no smtp client for beaglebone? Sep 19 04:00:09 I'm guessing it's really high Sep 19 04:00:46 hellya: no, there is not Sep 19 04:00:51 am I the only one here using a beagleboard rev c4? Sep 19 04:00:59 have a bbb too... Sep 19 04:02:20 so is there any way at all to send email from a beaglebone black? Sep 19 04:02:29 hellya: netcat is a really good smtp client Sep 19 04:02:45 you can send e-mail all day long Sep 19 04:03:56 hellya: you'll probably want to read this too: http://www.ietf.org/rfc/rfc2821.txt Sep 19 04:03:58 thanksi will have a look Sep 19 04:04:03 cool Sep 19 05:19:47 hi all, I am looking for help connecting to my bbb via usb Sep 19 05:20:08 I am using arch linux, and I can't reach bbb ip address Sep 19 05:20:47 when I connect the beaglebone a new network interface pops up: enp0s29u1u2: mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 Sep 19 05:21:23 but I cannot connect to 192.100.7.1 Sep 19 05:21:59 even after I set the inteface up: ip link set up enp0s29u1u2 Sep 19 05:22:11 status changes to UNKNOWN Sep 19 05:24:54 the usb defaults to 192.100.0.2 Sep 19 05:24:59 sorry 192.100.7.2 Sep 19 05:25:39 yep, no luck connecting Sep 19 05:26:06 Tried rebooting the bone? swap computers? Sep 19 05:26:50 I haven't got any other computer right now, yep rebooted the bone several times, I even tried with other one I have here Sep 19 05:26:52 other bb Sep 19 05:27:13 lights blink and all, hehe Sep 19 05:29:13 you're on a windows machine? Sep 19 05:29:21 nop arch linux Sep 19 05:29:40 I ran the udev rules setup script Sep 19 05:30:07 and there is a new device file /dev/ttyACM0 Sep 19 05:30:15 but no /dev/ttyUSB* Sep 19 05:36:56 try reflashing the eMMC image maybe? Sep 19 05:39:12 sounds kind of extreme, I would be afraid of bricking my bone Sep 19 05:39:38 I've tried with two bones and I can connect to none Sep 19 05:40:40 My suspicion is that it has to do with with my linux installation, arch linux is rolling release and its ahead of the conventions for other linux distros Sep 19 05:41:35 ur running Arch linux on ur BBB? Sep 19 05:41:42 or ur Desktop machine? Sep 19 05:42:07 nop on my host machine, at some point I would like to run arch on the bb Sep 19 05:46:57 don't u have like a windows partition u can check from? Sep 19 05:50:56 nop, I only've got linux Sep 19 05:51:47 I've a friend that also uses arch linux and he told me he didn't have any issue connecting to his bbb Sep 19 06:03:38 Hi. I have a small question. I am currently in the process of chosing an ARM board. The PI is kind of old hardware vs. the Beaglebone Black. However it has great Software support and a huge community. I will link it to an arduino for most projects. So the IO capabilities aren't so important. How do you feel the sotwaresupport and comunity for the Black is developing? Sep 19 06:10:33 huge community? just like the population of roaches is huge? :D Sep 19 06:14:30 Don't get the joke :-/ Sep 19 06:28:37 a wonderfull JIHAD everyone! Sep 19 06:33:39 Hi, I want to create an ad hoc net at 5GHz with my beaglebone and its cape 'BeagleBone TiWi-BLE w/ chip Antenna'. I wrote some document about it and I have to modify something in drivers. If I follow paths to find ".c" files that I have to modify, I don't find them ! All directories contains only ".h" files. Is it possible? Sep 19 06:34:28 *I 'read' (not 'wrote') some document Sep 19 06:34:30 max__: you need to have the kernel sources, not just the header files Sep 19 06:34:54 and the network drivers are in drivers/net/ Sep 19 06:43:10 I follow the instructions contain in 'http://wireless.kernel.org/en/users/Drivers/wl12xx#Driver_supported_features'. I use the command 'git clone git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git' and I install the latest version of drivers Sep 19 06:49:40 yes Sep 19 06:49:50 did you compile directly on the bbb? Sep 19 06:50:06 or did you adapt the build instructions for cross compilation? Sep 19 06:53:07 I compile directly on bb Sep 19 07:02:24 max__: as said yesterday Sep 19 07:02:32 it probably the region setting in the NVS file Sep 19 07:02:35 regulatory etc Sep 19 07:02:55 http://wireless.kernel.org/en/developers/Regulatory/CRDA Sep 19 07:03:09 I remember some talk about that here on IRC in the past, might google the logs Sep 19 07:03:23 or maybe just edit the NVS file to allow 5ghz Sep 19 07:05:59 note: if your country does not allow operation on 5GHz, then editing the NVS file and running a wlan on 5GHz is illegal Sep 19 07:09:18 and "they" will come and get you Sep 19 07:10:28 or they might send the FSM Sep 19 07:34:27 LetoThe2nd: NO!!! NOT THE FINITE STATE MACHINE!!!! Sep 19 07:38:35 hrhrhr Sep 19 07:38:59 the CIA - Chinese Intelligence in America Sep 19 07:50:33 thank you for the link ! but I think there is another problem that I have to solve: I can't find .c files. All directories contains only .h files. I can't go on. It's so strange. I don't know where is the problem Sep 19 08:01:54 what directories? Sep 19 08:06:10 hello. my time and date out in BBB. after the reboot it is in 2000 year. how to solve it? Sep 19 08:06:50 askos: http://derekmolloy.ie/automatically-setting-the-beaglebone-black-time-using-ntp/ Sep 19 08:09:37 i had done it before but after reboot it changes. Sep 19 08:09:54 for example in '/usr/src/kernel/arch/arm/mach-omap2' I find only .h files, instead, according to the link that I'm following, in this path there are also .c files Sep 19 08:11:36 ohai av500 Sep 19 08:15:27 after the reboot the date is sat Jan1 2000 Sep 19 08:16:01 askos: have you just copypasred or actually read the link? Sep 19 08:16:49 askos: second sentence, even... :-((( Sep 19 08:17:20 2 days ago i have completely read the link and apply it on BB black . but today when i ON the BBB the date again 2000 Sep 19 08:17:44 ismail: ahoi Sep 19 08:18:06 askos: GO READ THE TEXT Sep 19 08:18:21 askos: what does the second sentence tell you? Sep 19 08:19:19 LetoThe2nd: which second sentence? Sep 19 08:20:10 the one after the first Sep 19 08:20:13 before the third Sep 19 08:20:41 askos: open that link. then look at it. there are black tiny pictures on white ground. most people call them letters. Sep 19 08:21:30 askos: then start at the top, and read those letters. if you are unable to read them, please ask a friend to read it aloud for you. Sep 19 08:22:13 askos: the essential part is: READ FROM THE TOP, DO NOT JUST LOOK FOR COMMANDS TO COPY! Sep 19 08:22:33 there might be useful information in the letters between, you know? Sep 19 08:25:47 din doing dong Sep 19 08:26:11 mrpackethead: ahoi Sep 19 08:27:53 LetoThe2nd: ok and thanks for so much detail explanation on how to read.:). but i have already thoroughly read it!! Sep 19 08:28:04 askos: you have not. Sep 19 08:28:15 askos: or would know why the board is at year 2000 again. Sep 19 08:30:17 askos: so again: what does the second sentence tell you? Sep 19 08:31:07 askos: wow. you know after the boot, the date IS ALWAYS Jan1 2000 Sep 19 08:31:27 if you want it to not be that date Sep 19 08:31:28 you need to make a time machine Sep 19 08:32:35 Setting the Time on a Once-off Basis. this one :) Sep 19 08:33:00 once it is off, no use to set time Sep 19 08:33:04 askos: this is not a sentence. its a header. Sep 19 08:33:44 askos: the SECOND SENTENCE in the standard text. it must be really hard for you to read. Sep 19 08:33:56 wat is zis readink? Sep 19 08:34:29 LetoThe2nd: kindly read it for me Sep 19 08:34:33 :) Sep 19 08:34:35 askos: no. Sep 19 08:34:52 here is a relevant part: "the board doesn’t have a battery backup" Sep 19 08:35:01 askos: honestly, by now i think that you are either an idiot, a troll, or both. Sep 19 08:36:22 * KotH would go for both Sep 19 08:36:25 just to be sure Sep 19 08:36:36 LetoThe2nd: the way of teaching you use it showing that you are master idiot Sep 19 08:36:36 * LetoThe2nd will leave that topic now for good. i'm sad to have spent so much time trying to help someone really not deserving it. Sep 19 08:36:37 :) Sep 19 08:37:27 moaning Sep 19 08:37:43 panto: exactly Sep 19 08:38:29 preach bear brotha Sep 19 08:38:33 greetings greek guy Sep 19 08:38:48 panto: you are early today Sep 19 08:38:52 hi there untypical turkish chocolate jihad person Sep 19 08:38:57 KotH, no I'm not Sep 19 08:38:58 breach pear prother? Sep 19 08:39:06 KotH: he got too much german discipline in the past weeks Sep 19 08:39:24 8am conf call... each day... Sep 19 08:39:32 * panto <- not a morning person Sep 19 08:40:11 av500, about that... nope Sep 19 08:43:09 come to switzerland Sep 19 08:43:23 we teach everyone discipline! even the germans! Sep 19 09:13:07 does BBxM have a Camera Cape/Board to enable connecting an s-video input to it ? Sep 19 09:13:18 no Sep 19 09:13:28 well Sep 19 09:13:41 you can adapt a leopard board addon Sep 19 09:13:42 you can have one using the PRU :P Sep 19 09:13:47 xM? Sep 19 09:13:53 ah, sorry Sep 19 09:13:55 missed that Sep 19 09:13:58 yeah was reading now about the leopard board camera board Sep 19 09:14:20 KotH, I was told that the germans manage to piss off the swiss quite a lot Sep 19 09:14:25 any idea if the kernel has support for it ? Sep 19 09:14:25 dunno if truth or not Sep 19 09:14:46 because i found some posts on the TI forum that are not that nice with the xM and camera board Sep 19 09:15:59 panto: yeah... Sep 19 09:16:10 panto: as av500 would say, it's a zerg rush Sep 19 09:16:18 heh Sep 19 09:16:35 vvu|Log: there was an addon for leopard that has a TI chip that converted video/svideo Sep 19 09:16:50 that worlks also with BB, but needs soldering Sep 19 09:17:00 av500: http://de.mouser.com/ProductDetail/Leopard-Imaging/LI-VI365/?qs=gjRkUK5iFpgyEJlrpLsehQ== Sep 19 09:17:07 it was discussed here at lenght in the past, logs might be googled Sep 19 09:17:22 yes that Sep 19 09:17:45 3.2 kernel seems to have the driver for it as google says Sep 19 09:18:10 av500: i am thinking to use this with my autofocus project i told you aobut Sep 19 09:18:11 about Sep 19 09:18:17 not to capture from ffmpeg and those Sep 19 09:18:35 http://logs.nslu2-linux.org/livelogs/beagle/beagle.20120301.txt Sep 19 09:19:11 http://osdir.com/ml/beagleboard/2011-06/msg00318.html Sep 19 09:19:30 the TVP ship itself is supported in linux Sep 19 09:19:40 we used that on products in the past Sep 19 09:20:48 av500: i`m planning to use the DSP from the BBxM to get data from the camera then compute stuff Sep 19 09:21:07 mainly as an experiment because it can be done easily but just for the sake of doing something new :) Sep 19 09:25:11 you get the data using v4l2 on linux Sep 19 09:25:14 then pass to DSP Sep 19 09:25:19 yep Sep 19 09:25:27 i want to use the DSP in the end Sep 19 09:25:27 yes Sep 19 09:25:32 I did all that 5ys ago Sep 19 09:25:50 so i know who to annoy with this thingies :) Sep 19 09:28:15 i forgot it all Sep 19 09:28:38 av500, perhaps as a coping mechanism Sep 19 09:30:44 for sure Sep 19 09:31:13 av500: why did you forget it all? was i that traumatic? Sep 19 09:31:50 av500: but how i get it that addon board speaks with the BB on i2c Sep 19 09:32:24 can that be adapted to work on the BBB? except DSP :) Sep 19 09:32:50 i2c? Sep 19 09:33:04 the BBB has a parallel CCDC input Sep 19 09:33:09 the TVP hooks into that Sep 19 09:33:13 er Sep 19 09:33:15 the BB XM Sep 19 09:33:18 the BBB does not have that Sep 19 09:33:39 * vvu|Log senses the lack of sleep that is showing really well Sep 19 09:34:13 so i guess now the only thing remaining is to order some things :) Sep 19 11:05:29 what should I install to build qt4-embedded nativly on bbb? Sep 19 11:16:11 has anyone build meta-toolchain-qte for angstrom v2012.12 ? Sep 19 11:16:33 hello all Sep 19 11:16:41 hello mxii Sep 19 11:17:19 i have an probeblem with the spi device.. i have followed several how-to's.. but after an reset the spi device is not present Sep 19 11:17:32 i have to enabel it every time manually Sep 19 11:17:42 i have edited the "uEnv.txt" Sep 19 11:18:05 i think it works normally.. but the only problem is after an reset .. Sep 19 11:22:53 anyone knows how to build a custom beagleboneblack image? Sep 19 11:25:49 build the regular image Sep 19 11:25:53 customize it Sep 19 11:26:07 depends on what OS you want to have on that image Sep 19 11:26:51 Linux maybe Sep 19 11:27:53 for linux you probably want to look at angstrom-distribution Sep 19 11:28:24 on the website is an example on how to build Sep 19 11:28:29 don't i need angstorm sources to build from? Sep 19 11:28:56 http://www.angstrom-distribution.org/building-angstrom Sep 19 11:30:05 yes they will be fetch during the build process Sep 19 11:32:23 but the sources are for beagleboard, they are the same fr beaglebone black? Sep 19 11:36:01 for MACHINE you should specify beaglebone Sep 19 11:36:27 MACHINE=beaglebone ./oebb.sh config beaglebone Sep 19 11:43:50 I am working on a windows machine. can i install Ubuntu on a VirtualMachine and then build the angstorm image inside and transfer it to the beagleboneblack? Sep 19 11:44:28 you can, if you are willing to wait a week or so. Sep 19 11:46:07 what costumizations to the image are you instred in ? Sep 19 11:48:44 i need to remove services like GateOne, Cloud9 media players, browsers etc and just keep the main core layers. i need to work with Ethernet/Wifi, PWM, i2c and a few GPIO's and the USB lib for like HDD's and other generic devices. getting rid of the GUI interface, those bone capes and all the extra stuff inside. so i was thinking of making my custom image, to even update some things, like gstreamer from 0.1 to 1.0 and so on. Sep 19 11:49:30 whats a better approach, removing things that are inside the angstorm image or making a new one with whats needed inside? Sep 19 11:53:26 In the end will you endup building c or c++ aplications for taht system or not ? Sep 19 11:53:52 yes, i have to make custom apps for the bone to work with. Sep 19 11:54:05 so it will be based in C/C++/Java Sep 19 11:54:22 and some shell scripts Sep 19 11:56:03 gnsx: just use the std angstrom image and remove the services you dont need Sep 19 11:56:13 no need to recompile angstrom for that Sep 19 12:00:54 can i compule gstreamer1.0 on a desktop and transfer it to the BBB? Sep 19 12:01:12 it needs libs and what not crossing like 500mb Sep 19 12:01:23 and there is not much space left on the BBB Sep 19 12:02:41 and what about the Cape libraries and what not Sep 19 12:26:11 ok cloud9 is out Sep 19 12:26:13 the capes? Sep 19 12:26:17 how to get rid of? Sep 19 12:27:21 gnsx: there is gstreamer for angstrom Sep 19 12:27:56 thats Gstreamer 0.10 Sep 19 12:28:00 i need 1.0 Sep 19 12:29:19 i'l remove these things and see how much the image becomes. Sep 19 12:29:44 if you need a lot of changes, recompile the image Sep 19 12:29:48 and remove stuff you dont need Sep 19 12:30:05 then you also have a cross build environment to build gst Sep 19 12:30:11 yes! thats what i wanna do i guess, can u point me how to? Sep 19 12:30:14 alternatively, ignroe the emmc and run from SD Sep 19 12:30:22 with lots of space Sep 19 12:30:28 [13:28] http://www.angstrom-distribution.org/building-angstrom Sep 19 12:30:34 you were already pointed there Sep 19 12:31:25 if my stuff works good on SD then i can port it to the SD ye? well thats the plan, so i wanna make like a Minimal but working image, thats smaller to distribute too. thats why i wanted to make my own image so i can choose what goes inside and then pack it instead of slicing down Angstorm and then endup with stuff not working and waht not. Sep 19 12:31:41 i wanna be certain about one thing. Sep 19 12:32:31 hello, anyone knows how to install lftp client on angstrom distro and beagleboard black edition? Sep 19 12:33:01 now i am going to build Angstorm for the BBB on a Ubuntu based machine (VirtualBOx for me i am a WIndows User), so what i have in Ubuntu will go inside the image or like i have to make a folder that will contain what goes inside and then like COmpile it from that folder itself. I m a beginer to linux sorry, please excuse my retarded questions. Sep 19 12:41:17 what you build does not depend on the system you run on your PC Sep 19 12:41:34 also note that there are issues to build on ubuntu, but Linux distros like fedora do work Sep 19 12:41:54 see above link, follow the steps Sep 19 13:01:01 thanks av500, btw i got rid of CLoud9 and GateOne, freed like 300mb, ima try to blow up the Cape Libraries and see how much space gets freed further. Sep 19 13:01:20 while building how do i manage packages like what i wanna install inside the image? Sep 19 13:05:28 I am using BBB with Ubuntu 12.04 LTS , I have disconnected an EEPROM of LCD 4 cape and connected to 5.7" TFT LCD , Also I changed the resolution to 680x480 in LCD4 dts file and compiled kernel source, Finally I am getting a display on LCD but the display is flickering and showing double image... How can I resolve this problem?? Sep 19 13:05:42 gnsx: read the docs of angstrom and oe Sep 19 13:10:26 I am using BBB with Ubuntu 12.04 LTS , I have disconnected an EEPROM of LCD 4 cape and connected to 5.7" TFT LCD , Also I changed the resolution to 680x480 in LCD4 dts file and compiled kernel source, Finally I am getting somthing on 5.7 " LCD connected with beaglebone black but the display is flickering and showing double image... How can I resolve this problem?? Sep 19 13:10:37 by pure repetition of course! Sep 19 13:25:22 hi, the irc logs seem to be down again :( Sep 19 14:00:59 I am using BBB with Ubuntu 12.04 LTS , I have disconnected an EEPROM of LCD 4 cape and connected to 5.7" TFT LCD , Also I changed the resolution to 680x480 in LCD4 dts file and compiled kernel source, Finally I am getting somthing on 5.7 " LCD connected with beaglebone black but the display is flickering and showing double image... How can I resolve this problem?? Sep 19 14:35:41 where is uEnv.txt located when booting from eMMC? I need to disable HDMI. Sep 19 14:35:55 on BBB. Sep 19 14:36:07 on emmc Sep 19 14:36:53 av500, duh... I kind of figured that out on my own... but where? what mount point? or dev to mount? Sep 19 14:37:18 where MLO and uboot are Sep 19 14:38:21 cfo215 media beaglebone Sep 19 14:38:47 gnsk, thank you. I'll see if I find it there. Sep 19 14:44:16 gnsx, found it at /dev/mmcblk0p1. I'm using my own "bastardized" image of Angstrom v2013-06. Sep 19 14:44:17 av500 : I am using BBB with Ubuntu 12.04 LTS , I have disconnected an EEPROM of LCD 4 cape and connected to 5.7" TFT LCD , Also I changed the resolution to 680x480 in LCD4 dts file and compiled kernel source, Finally I am getting somthing on 5.7 " LCD connected with beaglebone black but the display is flickering and showing double image... How can I resolve this problem?? Sep 19 14:45:27 <_av500_> put the correct timing values Sep 19 14:45:32 <_av500_> not just the resolution Sep 19 14:45:41 ... and repeat everything over and over again! Sep 19 14:46:15 <_av500_> ... and repeat everything over and over again! Sep 19 14:55:08 hello, anyone knows how to install lftp client on angstrom distro and beagleboard black edition? Sep 19 14:55:26 can't use opkg install lftp Sep 19 14:55:58 "why"? Sep 19 14:55:59 <_av500_> opkg update Sep 19 14:56:04 <_av500_> opkg list Sep 19 14:56:16 _av500_: spielverderber ;) Sep 19 14:58:21 lftp is not listed Sep 19 14:59:20 <_av500_> and it has to be lftp? Sep 19 15:00:05 or other client that supports mirror functionallity Sep 19 15:01:07 <_av500_> rsync? Sep 19 15:01:18 no, must be FTP Sep 19 15:01:37 <_av500_> and after all, you can just grab sources and do a configure; make; make install Sep 19 15:01:45 <_av500_> like in ye olde times Sep 19 15:02:01 make fails Sep 19 15:02:14 "why"? Sep 19 15:02:16 i've already tried this Sep 19 15:02:36 i get an error... Sep 19 15:02:48 whoa, an error. Sep 19 15:02:50 something like... undefined reference Sep 19 15:02:51 "why"? Sep 19 15:03:46 i don't know... Sep 19 15:03:53 well then find out. Sep 19 15:03:55 maybe a missing library or package Sep 19 15:03:59 <_av500_> or pastebin the error Sep 19 15:04:09 <_av500_> maybe Sep 19 15:04:13 "something like" is not an error message, and "does not work" is also not. Sep 19 15:04:50 ok, i will try again Sep 19 15:05:15 <_av500_> pastebin a full log Sep 19 15:10:57 when i execute ./configure installing lftp Sep 19 15:11:07 there are some libraries missing :( Sep 19 15:11:16 s checking whether to build shared libraries... no Sep 19 15:11:19 libraries can be installed. Sep 19 15:11:30 and that is still not a log. Sep 19 15:11:38 and still not a valid error message Sep 19 15:12:26 checking whether getlogin_r is declared... yes checking whether getlogin is declared... yes checking for getopt.h... (cached) yes checking for getopt_long_only... yes checking whether getopt is POSIX compatible... yes checking for working GNU getopt function... yes checking for working GNU getopt_long function... yes checking whether getenv is declared... yes checking for C/C++ restrict keyword... __restrict checking for struct timeval. Sep 19 15:12:34 *digh Sep 19 15:12:38 *sigh* even Sep 19 15:12:51 toni: like av500 said: please *pastebin* the full log Sep 19 15:13:10 how to to that? Sep 19 15:13:17 google "pastebin" Sep 19 15:13:21 ok Sep 19 15:19:13 drm_kms_helper: panic occurred, switching back to text console on BBB w/LCD7 running custom Angstrom Sep 19 15:21:09 Anyone know how to resolve this? Sep 19 15:23:21 pastebin a full log Sep 19 15:25:25 http://pastebin.com/XHkxU2ww ... is't not full though. I was sitting at the login prompt when it panicd Sep 19 15:26:11 oops Sep 19 15:26:15 lunch Sep 19 15:27:37 Crofton|work, you buying? Sep 19 15:27:49 rofl Sep 19 15:27:51 mine, yes Sep 19 15:27:52 l8r Sep 19 15:28:40 l8r Sep 19 15:46:43 hi, somebody has try lunbutu on beagleboneblack ? Sep 19 15:47:12 lubuntu Sep 19 15:51:52 hi, somebody has try lubuntu on beagleboneblack ? Sep 19 15:52:30 apparently not Sep 19 15:52:34 hiii Sep 19 15:52:38 hologram: not more or less people than 5 minutes ago. Sep 19 15:53:11 I try to program bealebaord x Sep 19 15:54:38 hi, somebody has try lubuntu on beagleboneblack ? Sep 19 15:54:43 I can not go link of http://192.168.7.2 Sep 19 15:55:00 davr: no Sep 19 15:55:11 i have the same question davr Sep 19 15:55:14 lol Sep 19 15:55:23 i think it will work like ubuntu but i'm not sure Sep 19 15:55:41 rlt: sounds like you got a cheap chinese knockoff, the real ones are called beagleboard xm, not bealebaord x Sep 19 15:55:50 link will work with ubuntu?? Sep 19 15:59:32 any answer?? Sep 19 15:59:45 I'm new in thosoe area Sep 19 15:59:51 yes Sep 19 16:00:43 how can I make video streaimg?? Sep 19 16:01:07 like in standar ubutu i think Sep 19 16:01:22 maybe you will need a plugin Sep 19 16:01:40 rlt: sorry, you dont make sense Sep 19 17:53:02 what might be the reasons for a (self-powered) usb dvd drive not showing up on the BBB? Sep 19 17:53:08 some module missing? Sep 19 17:56:31 <_av500_> dmesg output is dmesg Sep 19 17:57:10 dmesg output is not output, but empty :((( Sep 19 17:57:27 <_av500_> no usb messages? Sep 19 17:57:31 <_av500_> at all? Sep 19 17:57:38 *nothing at all.* Sep 19 17:57:58 <_av500_> now try with a usb cable Sep 19 17:58:26 ah you mean that 63A/400V cable was not correct. umm.... Sep 19 17:59:35 nah, seriously - exact same drive/cable works fine on my desktop box. Sep 19 17:59:48 <_av500_> and sonething else usb-ish works on the bbb? Sep 19 17:59:57 let me try. Sep 19 18:01:11 hm. connecting a horrific rs232 adapter also gives no messages. Sep 19 18:01:19 <_av500_> ah Sep 19 18:01:27 <_av500_> now power on the BBB Sep 19 18:01:46 * LetoThe2nd stabs av500 with the 63A plug. Sep 19 18:11:15 1) installed kernel-module-{usbserial,pl2303} 2) added them to /etc/modules 3) reboot Sep 19 18:13:16 4) even manually loading them Sep 19 18:13:27 I should look this up. Does the bbb have a CSI - camera bus? Sep 19 18:13:29 nothing changes, adapter does not work Sep 19 18:13:35 <_av500_> SpeedEvil: no Sep 19 18:13:40 Thanks. Sep 19 18:13:50 http://www.ebay.co.uk/itm/Original-Nokia-808-Pureview-808-Pure-view-Camera-4858308-41MP-/271278584693?pt=UK_Replacement_Parts_Tools&hash=item3f2976b375 - made me think Sep 19 18:14:00 (and i know there are likely issues anyway) Sep 19 18:14:08 <_av500_> panda has Sep 19 18:14:11 <_av500_> and rpi!!! Sep 19 18:17:26 *grumble* Sep 19 18:19:38 Pi doesn't really Sep 19 18:19:51 It's only usable with the one camera module Sep 19 18:38:51 <_av500_> SpeedEvil: and there is a data sheet for the 808 cam? Sep 19 18:41:36 _av500_: in general, there aren't datasheets for many cameras at all Sep 19 18:41:41 ^phone Sep 19 18:43:16 http://www.youtube.com/watch?v=7TedIzmguP0 is sort of relevant Sep 19 18:43:23 The MIPI and CSI interface are quite close Sep 19 18:43:36 - reverse engineering a ipod nano 6 disaply Sep 19 18:49:42 if im right csi from R'pi cam module is patented/not opensource Sep 19 19:04:35 ok, so what im looking to have is 6 USB ports that i can track which port is being used, i dont think this is possible with a USB hub to my knowledge, do i have any other options? Sep 19 19:07:41 <_av500_> well kernel tells you what is connected where, no? Sep 19 19:10:56 _av500_: hmm let me check, i could of sworn last time i checked it was all reporting under the USB port on the beaglebone, not different ones on the powered USB hub Sep 19 19:12:56 there should be a /dev/*/by-id/ ony each usb device also .. that way you can locate a specific usb device no matter where it got plugged Sep 19 19:14:10 yeah huh? ok let me plug up my powered USB and do some lsusb -v's Sep 19 19:37:40 LetoThe2nd:i have self powered modem and works well, but is needed to attach before than bbb to a good powered hub Sep 19 19:41:29 SyNko: i see... thanks for the pointer. Sep 19 19:46:24 np Sep 19 20:15:40 <_av500_> LetoThe2nd: you have no usb dmesg at all? Sep 19 20:17:37 http://www.mipi.org/specifications/camera-interface#CSI2 Sep 19 20:18:09 http://www.raspberrypi.org/wp-content/uploads/2012/10/Raspberry-Pi-R2.0-Schematics-Issue2.2_027.pdf Sep 19 20:18:54 IMHO _ this two links are a good starting point for connect the 41mp camera Sep 19 20:20:11 SpeedEvil: ^^ Sep 19 20:20:28 im interested Sep 19 20:24:00 SyNko: utterly useless Sep 19 20:24:35 why?it uses CSI2bus? Sep 19 20:24:37 SyNko: The CSI bus is connected to the GPU, and has a driver - a binary only one Sep 19 20:24:56 The driver does not support generic cameras. Only the r-pi foundation one. Sep 19 20:25:20 <_av500_> CSI and DSI are a pain Sep 19 20:25:24 ah ok ok, so its hard Sep 19 20:25:41 but i got an idea.... Sep 19 20:26:17 <_av500_> get a 808 and a logic analyzer, a big one Sep 19 20:26:37 my little mobile can share the camera to a pc, is linux compatible too Sep 19 20:27:39 m8 there be some where an app for the pure view to share in realtime the camera Sep 19 20:27:51 <_av500_> and? Sep 19 20:28:53 use the fuky camera by usb to the bbb as it seems connected directly Sep 19 20:28:59 to the kernel Sep 19 20:29:28 _av500_ : what is logic analyzer? Sep 19 20:30:39 ah nice Sep 19 20:30:41 http://en.wikipedia.org/wiki/Logic_analyzer Sep 19 20:30:44 SyNko: using the pureview phone isn't really interesting Sep 19 20:30:57 yep shure Sep 19 20:31:05 but its cam yes ... Sep 19 20:31:12 *sure Sep 19 20:31:14 the point is to be able to connect - fairly cheaply - the camera to a generic device Sep 19 20:31:23 <_av500_> SpeedEvil: you can use it to snap pics of the logic analyzer screen :) Sep 19 20:36:24 Hello I am having trouble installing ubuntu on my sdcard. My bone won't boot Sep 19 20:36:38 I am following http://elinux.org/BeagleBoardUbuntu#Quantal_12.10_armhf Sep 19 20:36:58 any help? Sep 19 20:37:01 magopieri Sep 19 20:37:12 why dont you use debian? Sep 19 20:37:26 it runs well Sep 19 20:37:48 ok.. the issue is not ubuntu itself i think is the sd-card creation Sep 19 20:37:58 <_av500_> how did you create it? Sep 19 20:38:06 <_av500_> reading it from the PC should show 2 partitions Sep 19 20:38:13 <_av500_> one FAT32 with MLO and uboot files Sep 19 20:38:17 <_av500_> do you see that? Sep 19 20:38:18 sudo ./setup_sdcard.sh --mmc /dev/sdb --dtb bone Sep 19 20:38:27 it does Sep 19 20:38:30 <_av500_> ok Sep 19 20:38:33 <_av500_> then powrer off Sep 19 20:38:39 <_av500_> hold boot button and powrer on Sep 19 20:38:45 <_av500_> with card inside Sep 19 20:39:11 ok Sep 19 20:39:14 then? Sep 19 20:39:48 untill the led stop on Sep 19 20:39:53 release the button Sep 19 20:40:04 all the 4 leds the same time Sep 19 20:40:31 the only led on is the pwr Sep 19 20:40:45 keep pressed so Sep 19 20:41:10 on Sep 19 20:41:16 nothing jappens Sep 19 20:43:57 looking at the card Sep 19 20:44:01 it has 2 partition Sep 19 20:44:05 one is 66M Sep 19 20:44:15 the other one is 3.6gb Sep 19 20:44:34 magopieri: http://avedo.net/653/flashing-ubuntu-13-04-or-debian-wheezy-to-the-beaglebone-black-emmc/ Sep 19 20:44:57 follow only the first instructions Sep 19 20:45:02 to boot from sd Sep 19 20:45:52