**** BEGIN LOGGING AT Sat Mar 29 03:00:00 2014 Mar 29 08:44:28 Hi I was reading up here about the screen resolution problems with a tv. http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI Mar 29 08:44:54 I was thinking about editing the uENV.txt or something since no settings on the TV actually fix the problem. Has anyone else had any luck with this? Mar 29 09:02:42 hi Mar 29 09:03:30 can anyone give some help on setting up internet on BBxM Mar 29 09:03:48 im using ubuntu 13.04 Mar 29 09:06:27 what do you need help with? Mar 29 09:07:43 lan connection in BBxM Mar 29 09:08:13 ok so it is a wired connection. What have you tried so far? and what specifically isn't working? Mar 29 09:09:24 ok...when i connect it to a lan, its not been recognised. Mar 29 09:09:43 update command wont run... Mar 29 09:10:05 what happens if you type in ifconfig? what kind of output do you get? Mar 29 09:10:26 ok..ill tell u Mar 29 09:11:14 well it shows etho and lo Mar 29 09:11:41 im a newbie, just unboxed it last week Mar 29 09:11:49 are you familar with linux? Mar 29 09:12:21 somewhat familiar, have a friend who is Mar 29 09:12:27 I am new too only had mine for 24 hours give or take. Someone gave it to me to try and setup a server of sorts. Mar 29 09:12:39 gotcha well now that your over on ubuntu I would think a lot of it is just ubuntu now Mar 29 09:12:59 so can you pastebin the ifconfig information? Mar 29 09:13:01 ohh. Mar 29 09:14:07 ohh? Mar 29 09:14:35 its actually on another dvimonitor Mar 29 09:15:03 BBxm connected to it, so cant copy paste. Mar 29 09:15:14 what abt screen shot? Mar 29 09:15:21 so your not sshing into it? Mar 29 09:15:36 you would still need to transfer the screenshot from the board to your desktop and everything Mar 29 09:15:51 why not just ssh into it instead of going through a monitor. Mar 29 09:18:18 granted you will be stuck in the terminal and not in a gui but you will have much more control Mar 29 09:18:25 ok i understand... Mar 29 09:18:46 you will be able to copy and past lines of code from the internet and what not. Do you know how to ssh into the board? Mar 29 09:19:06 right now im using mylaptp and bbm connected to keyboard,monitor and lan Mar 29 09:19:32 hi everybody, where can i get latest toolchain to cross compile qt application for beaglebone black with (angstrom) my host is ubuntu 64-bit Mar 29 09:19:33 for now i powered it on usb, Mar 29 09:21:08 so you have it plugged into your computer via usb to power it up and everything? Mar 29 09:21:31 if you go to the cmd prompt on windows and type in ping 192.168.7.2 and see what comes up? Mar 29 09:21:51 ok Mar 29 09:22:40 request timed out Mar 29 09:22:44 actually the ip is going to be different. on the BB when you type in ifconfig what do you get under eth0 and inet? Mar 29 09:23:47 it should look something like this http://pastebin.com/b9PFKtY3 Mar 29 09:24:08 in which case under eth0 and then inet you can see my ip address is 192.168.1.121 Mar 29 09:24:21 its showing link encap Mar 29 09:24:27 inet addr Mar 29 09:24:44 rxed and txed packets Mar 29 09:24:50 etc in eth0 Mar 29 09:26:03 what is the inet value? Mar 29 09:26:13 that is going to be your ip address under eth0 Mar 29 09:26:30 and if you have something there you should have some form of internet connection Mar 29 09:26:35 or at least router connection Mar 29 09:26:46 ok now i pinged and ip address in lo inet, Mar 29 09:27:02 and did that work? Mar 29 09:27:04 127.0.0.1 Mar 29 09:27:14 o no that wont work what is under eth0? Mar 29 09:27:40 its hexadecimal Mar 29 09:27:53 inet addr: Mar 29 09:27:58 not inet6 addr: Mar 29 09:28:11 fe80::98a0:7bff:fe7c:54de/64 Mar 29 09:28:31 it is the inet addr: Mar 29 09:28:40 interesting Mar 29 09:28:41 under eth0 Mar 29 09:28:45 gotcha Mar 29 09:29:47 is there anything u specifically want me to answer? Mar 29 09:30:44 well I am just trying to help you out. I don't have a specific its standard troubleshooting and I am just trying to figure out whats what Mar 29 09:30:57 what happen if you ping 8.8.8.8 on the BB? Mar 29 09:32:15 its not reachable.cant connect Mar 29 09:32:43 well to be honest it seems to be a problem more on the ubuntu side of things then the BB side of things Mar 29 09:33:02 I think you would get a lot of help from people over in the ubuntu channel, might I recommend chatting with the people in unbuntu-server Mar 29 09:33:21 ok thanks for help :) Mar 29 09:33:30 I think they are always much more helpful then the people in just ubuntu, at least there is less chatter in unbuntu-server for simple things Mar 29 09:33:36 ya no problem. sorry I couldn't help more Mar 29 09:34:08 ok then bye ..have agr8 day Mar 29 09:34:20 it ubuntu* not unbuntu Mar 29 09:45:08 I ran the code on this site http://www.meadios.com/2012/01/blinking-leds-and-python/ just to check that I had installed all the GPIO stuff and see if things where working. Mar 29 09:45:13 where can i get latest toolchain to cross compile qt application for beaglebone black with (angstrom)? ,my host is ubuntu 64-bit Mar 29 09:45:33 that being said it worked great but now I need to figure out how to get my LEDs back to standard use/blinking Mar 29 09:53:10 ah no answer!!! for: where can i get latest toolchain to cross compile qt application for beaglebone black with (angstrom)? ,my host is ubuntu 64-bit Mar 29 09:54:28 wish I could help Mar 29 09:55:05 so if I understand correct your trying to take software source from angstrom to unbuntu? Mar 29 09:55:15 what software isn't available on ubuntu? Mar 29 09:55:21 and by unbuntu do you mean debian? Mar 29 15:26:50 * BBBtest says hi Mar 29 15:28:05 guys, real time process schedule depends on kernel version? and angstrom isnt capable of real time processes right? maybe soft real time? Mar 29 15:28:56 what pd sheduler is using the kernel 3.8? Mar 29 15:29:23 has nothing to do with BBB you know... Mar 29 15:30:04 Vaizki: well i thought it has a lot to do with embedded-> then embedded linux -> then BBB using elinux Mar 29 15:30:28 Vaizki: im havin BBB, and im planing to learn elinux to be able to programm and use BBB Mar 29 15:31:06 Vaizki: but you are right... i will try to find a channel for elinux Mar 29 15:32:04 BBB has 2 embedded microcontrollers for RT stuff Mar 29 15:32:48 so there is no good reason to run RT linux Mar 29 15:33:06 Vaizki: hah, there is the answer for my question Mar 29 15:34:00 Vaizki: im wondering how its that done, i mean the mcu-s are on the board? and what mcu-s, i couldnt see that until now Mar 29 15:34:55 BBBtest: from a library I'm looking at, they link http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions Mar 29 15:35:34 http://analogdigitallab.org/articles/beaglebone-black-introduction-pru-icss Mar 29 15:35:48 For example Mar 29 15:36:48 ah, thx Mar 29 15:40:49 and I still fail to run PRUs in 28 bit serial capture mode ... Mar 29 15:43:35 and what is the development environment for these PRUs? i cant find much infos regarded BBB, or should i just search near ARM? Mar 29 15:44:12 nvm finally found smth: http://www.element14.com/community/community/knode/single-board_computers/next-gen_beaglebone/blog/2013/05/22/bbb--working-with-the-pru-icssprussv2 Mar 29 15:45:19 wish I knew Mar 29 15:46:33 BBBtest: you need pasm, and probably the linux driver uio-pruss Mar 29 15:51:13 mazzoo: thx, but mostly PRUs arent used at all? Mar 29 15:59:30 Normally they areinactive Mar 29 16:02:41 for me PRU is one of the core features that makes the BBB unique, but of course YMMV Mar 29 18:17:49 <_ssl> i have ubuntu running on my BBB, whats the best way to get node.js and cloud9 installed? Mar 29 18:18:04 <_ssl> i did sudo apt-get install nodejs Mar 29 18:18:25 <_ssl> it worked but it cant seem to find cloud9 Mar 29 18:49:20 "MattRichardson" Mar 29 20:06:21 I tried installing the kernel-headers module for the black matching the running kernel version to build a module Mar 29 20:06:38 I couldn't get it to work, so i'm going to try full kernel source Mar 29 20:07:36 is grabbing the vanilla 3.8.13 tarball and applying the patch in /opt/source the right way to do this? Mar 29 20:10:05 sounds good Mar 29 20:54:57 hello Mar 29 21:03:23 dogrocket: moin Mar 29 21:12:40 I'm looking for guidance on enableing power management (e.g. hibernate / sleep) on the BBB. Can anyone recommend any good web sites that relate to this topic? Mar 29 21:31:49 iandow: not sure if there is any support for that Mar 30 02:07:34 Hello. Is anyone on that could help me real quick? Mar 30 02:11:26 Can I connect 5v devices to the beaglebone black? Mar 30 02:12:03 Can the beaglebone black be forced to USB 1.1 Mar 30 02:14:44 nick__: define "devices" and where/how you want to connect them? Mar 30 02:15:47 pauljbl: isnt usb2 fully backward compatible with 1.1 anyway? unless you mean usb1 which is crap and nothing works on? Mar 30 02:29:43 I wanted to see if I can get more bandwidth by forcing it to USB 1.1 **** ENDING LOGGING AT Sun Mar 30 02:59:59 2014