**** BEGIN LOGGING AT Sun Sep 21 03:00:00 2014 Sep 21 09:42:50 i'm looking at the latest images page (i have a bbb) and i see "BeagleBone Black (eMMC flasher)". i don't have a multimedia card (emmc) but i do have a regular micro sdhc. does that mean i have to use the "BeagleBone (Runs on BeagleBone Black as well without flashing the eMMC)"? also, is there any difference between the two other than the install medium? Sep 21 09:52:23 Moult: BBB has built-in storage (EMMC) Sep 21 09:54:47 Mustek: i don't quite understand emmc, can you help explain? Sep 21 09:55:25 https://learn.adafruit.com/downloads/pdf/beaglebone-black-installing-operating-systems.pdf Sep 21 09:56:17 Mustek: ahhhh :) Sep 21 09:59:43 Hello Sep 21 10:00:40 I installed the bone-debian on an sdcard using dd (from terminal Ubuntu 14.04 if thaat matter) The SDCard is 16 Go Sep 21 10:01:28 when connected with the card reader, I see 2 partitions, rootfs and BEAGLEBONE. Sep 21 10:02:37 But when I insert the SDCard in the BBB, nothing happend, no boot. I see USR0 being blue than Usr 2,3 4 and they stay on Sep 21 10:03:22 After a while, they are getting off and it start again from USR0 then 1,2,3 aso Sep 21 10:04:38 In dmesg, nothing happend. If I remove the SDCard, I see logs in dmesg like Product: AM335x USB and usb0 rndis_host Sep 21 10:05:24 tootai: you have to hold down a button before you power up the BBB if you want to boot from SD card Sep 21 10:05:38 oh ... Sep 21 10:07:02 tbr, where is this button located? I don't find it on the board ... Sep 21 10:07:27 there are two buttons, both are marked on the silk screen Sep 21 10:09:39 hello, anyone here that has worked with the PRU? Sep 21 10:13:24 tbr, I see nothing. BTW how to know which revicion is the board? Sep 21 10:13:30 *revision Sep 21 10:13:49 it should say on the board Sep 21 10:14:00 have you read the SRM yet? the system reference manual? Sep 21 10:15:40 yes. As I explained yesterday on this channel, I made a dd from the bone-debian of the /dev/sdd from bbb which ended with a lack of space after having written 74 Mbs Sep 21 10:16:34 Since then I can't boot anymore the board. I got the advice to install bone-debian to SD card ant then boot the BBB, what I did Sep 21 10:17:42 Now you tell me it should be 2 buttons, well, will take a magnifying glass ;-) to check Sep 21 10:17:52 read the SRM Sep 21 11:26:40 tbr: the board is still not booting from sdcard, despite the fact that I press the boot switch before unpluging/pluging the USB cable to the computer Sep 21 11:26:57 tbr: still nothing also in dmesg Sep 21 11:28:44 tbr: and can't find any REV information. I believe it's REV C from what I read in the SRM from REV C1 Sep 21 12:39:38 I installed 64bits drivers on a w8.1 notebook, the BBB is not recognized, have an error 28 (drivers not installed) for other device ARM335x USB Sep 21 12:39:42 any clue ? Sep 21 12:42:57 it is switching each 25 seconds or so between code error 28 (20 seconds) and code error 45 (5 seconds) Sep 22 01:02:38 Ok, im sure this has been answered several times already....but I cannot get gnuradio to install on my BBB running Angtrom. Sep 22 01:04:14 i get the libvolk.so.0.0.0 errors on make Sep 22 01:06:30 so whats the best way to get gnuradio on BBB **** ENDING LOGGING AT Mon Sep 22 03:00:00 2014