**** BEGIN LOGGING AT Wed Jun 10 02:59:59 2015 Jun 10 03:08:34 ah damn Jun 10 03:18:00 <= veremit 's alter-ego :) Jun 10 03:24:58 how much size is needed for android flash? Jun 10 03:25:20 is 4GB eMMC size small? Jun 10 04:25:51 hello? Jun 10 04:27:39 ask questions and wait for answers... Jun 10 04:28:25 the /topic has a guide :) Jun 10 08:03:08 hello. I installed android for bbb and i wanna use hdmi-dvi cable for monitor. what option should i change in uEnv? Jun 10 08:03:48 ask the people who maintain that android port? Jun 10 08:03:54 nobody here uses android Jun 10 08:04:34 ok. thank you Jun 10 08:06:01 tbr only few Jun 10 08:11:13 I tought the android thing has hdmi output, no? Jun 10 08:11:52 looks like not Jun 10 08:12:06 headless is all the rage anyway Jun 10 08:15:15 a beheaded android is not a happy android Jun 10 10:18:49 I'm trying to understand these overlays and DTS - Have BBB with Debian and a CBB-Serial, but i have not provided any overlays, and yet "cat /sys/devices/bone_capemgr.*/slots" shows: "0: 54:P---L cape-CBB-Serial,r01,Logic Supply,cape-CBB-Serial" Jun 10 10:19:12 So it has loaded an overlay, but from where? Jun 10 10:19:30 Running "find / |grep cape-CBB" finds nothing Jun 10 11:07:15 Knaldgas: it's more about the content of the files Jun 10 11:07:37 device overlays Jun 10 11:08:11 https://learn.adafruit.com/introduction-to-the-beaglebone-black-device-tree/device-tree-overlays Jun 10 11:24:09 how to build qt 5.4 for beaglebone debian or ubuntu ? Jun 10 12:20:52 Ad0: Thanks. I have (and had) the introduction on screen, I've also searched /lib/firmware and /boot with "grep -iar cape-CBB *" and no hits. Jun 10 12:25:10 Knaldgas: ok Jun 10 13:29:14 the default rowboat for bbb should have hdmi support Jun 10 13:42:25 The bone has rowboats now? Jun 10 14:09:49 hi Jun 10 14:10:29 I am facing some issu in updating my BBB Jun 10 14:10:50 I am having Debian Image... can anyone help ? Jun 10 14:11:30 any one ? Jun 10 14:12:20 what issues specifically? Jun 10 14:12:51 I am writing aptitude to update the Debian image in my BBB Jun 10 14:13:33 when i am typing uname -r I am getting 3.8.13-bone70 Jun 10 14:15:00 ok and Jun 10 14:22:16 are you rebootibng after updating the kernel Jun 10 14:22:23 rebooting even Jun 10 15:00:45 I am having some issue Jun 10 15:00:52 want to discuss Jun 10 15:01:08 while updating my BBB I am getting following things Jun 10 15:01:09 Reading package lists... Done W: Failed to fetch http://ftp.au.debian.org/debian/dists/wheezy/Release.gpg Could not connect to 192.168.174.131:3142 (192.168.174.131), connection timed out Jun 10 15:01:20 what may be the problem Jun 10 15:01:31 YOu have no connection to the Internet. Jun 10 15:01:37 Or, at least, to the update server. Jun 10 15:01:38 your proxy is down Jun 10 15:02:23 how to make proxy setting ? Jun 10 15:02:30 my internet is working Jun 10 15:02:50 dunno, how did you set it up initially Jun 10 15:02:55 Raj__: Are you sure your bone is connected? Jun 10 15:03:03 yes I am sure Jun 10 15:03:15 How did you test that?> Jun 10 15:03:16 I am pinging google.com and getting reply as well Jun 10 15:03:20 it tries to reach a local machine (192.168.174.131) if you try to upgrade obviously Jun 10 15:03:46 Oh, yup, proxy or broken DNS. Jun 10 15:03:52 Missed that bit. Jun 10 15:04:03 is there is any setting on nano and then fixing that ? Jun 10 15:04:11 how to remove the proxy ? Jun 10 15:04:16 * agmlego|skynet has spent a lot of time recently on a 192.0 netweork, so the local block glossed over. Jun 10 15:04:26 Raj__: Ask your site administrator. Jun 10 15:05:36 If that proxy is removed then will it connect to the normal IP's ? Jun 10 15:05:54 Is that proxy is restricting it from updation ? Jun 10 15:06:43 if there's a proxy setting it should be in /etc/apt/apt.conf I think Jun 10 15:07:40 ok I check it Jun 10 15:09:11 I found this : Jun 10 15:09:12 root@beaglebone:/etc/apt/apt.conf.d# cat 01proxy Acquire::http::proxy "http://192.168.174.131:3142/apt-cacher"; Jun 10 15:09:40 Do I need to remove it ? or need to change it ? Jun 10 15:11:07 ayone ????? Jun 10 15:14:14 Raj__, do you have a apt-cacher proxy on 192.168.174.131? Jun 10 15:14:28 no Jun 10 15:14:35 I removed it Jun 10 15:14:39 and its working now Jun 10 15:14:48 its connecting to the proper place Jun 10 15:15:16 Thankyou every one for helping me :) Jun 10 15:26:17 Should I be concerned when dtc does not complain about assert-failing-edge; ? (misspelled) Jun 10 15:31:27 Knaldgas, dtc doesn't know the spelling... it just dumps it in the blob tree... Jun 10 15:31:45 rcn-ee: And when I load the overlay? Jun 10 15:32:21 depends on driver.. but mis-spelllings will be ignored.. Jun 10 15:33:26 Ok, I was trying to get P8.35 to register as a 1PPS, but have failed so far Jun 10 15:33:57 and was wondering if I have made other "stupidities" Jun 10 15:38:07 I've made this dts-file http://pastebin.com/ibmPZfqq , and it appears to load fine - I do not get a new pps-source however, what have I missed? Jun 10 15:40:52 looks fine, matches the pps from: https://github.com/beagleboard/linux/blob/3.8/firmware/capes/BB-BONE-RTC-00A0.dts Jun 10 15:43:30 rcn-ee: So, any ideas as of why I do not get a new 1PPS source? Jun 10 15:43:57 dmesg | tail after echoing the cape? Jun 10 15:46:36 rcn-ee: Hmm, an unintentional restart appears to have fixed that part... Jun 10 15:46:56 1pps source has now been registered Jun 10 15:47:28 where you prevously adding the *.dtbo and removing. (without a clean reboot) ? Jun 10 15:48:47 rcn-ee: Yes, I have been adding and removing quite a few times Jun 10 15:48:57 and no clean boot Jun 10 15:49:26 I take from your question, that adding and removing is not THAT functional!? Jun 10 15:49:34 yeah... that's never really "worked" on 3.8.. ;) it's basicly broken, little hint for your next *.dtbo write. ;) Jun 10 15:51:07 rcn-ee: Thanks a bunch - I have been ripping my hair out over this! Jun 10 15:51:11 rcn-ee: :) Jun 10 15:51:33 And ppstest happily chatters once per second :) Jun 10 15:52:00 I wonder how many previous attempts that would have actually worked :-S Jun 10 20:30:21 Hi has anyone worked with FunctionFS on the beaglebone black? I am getting a kernel panic when I have tried to run ffs-test from the linux source. Jun 10 20:34:25 your the first i've heard try it.. Jun 10 20:36:10 I guess it is fairly new. It is the replacement for GadgetFS Jun 10 20:36:30 It seems to work quite will on a Zynq 7000. I was surprised when it didn't work on the beaglebone black. Jun 10 20:37:16 Well, they *aree* different pieces of hardwaree. Jun 10 20:38:48 They both use the musb driver. They aren't as different as you would think at the processor level. Jun 10 20:40:08 I *think* they both use Mentor Graphics IP for the usb OTG core Jun 10 20:40:12 functionfs is ancient ... it is since ages in android kernels ... (but new to regular linux) Jun 10 20:40:39 Guest98112, it use to be Mentor's ip.. now it's TI's ip but still using the musb driver. .;) Jun 10 20:41:25 I think there are two versions of FunctionFS. I am using the one that uses ConfigFS. Jun 10 20:45:42