**** BEGIN LOGGING AT Tue Jun 16 02:59:59 2015
Jun 16 07:48:58 <mevoco> does anybody know where I should put the 'xhost' command in the X11 startup scripts to open the local LCD cape display, so it can be used by remote terminals?
Jun 16 07:50:13 <mevoco> untill now, I always have to connect a USB-keyboard to issue the command on the LCD display itself
Jun 16 08:15:01 <KotH> mevoco: you can run xhost whenever the x server is running
Jun 16 08:15:18 <KotH> mevoco: iirc you can also set it globaly in xorg.conf
Jun 16 08:37:53 <Christoph_> Hi! Me again ;-) I still have problems to get my rebuild Kernel to work. The stock BBB image works fine, but the rebuild Kernel (with the script of RobertCNelson: http://elinux.org/Nh5capeSoftware) doesn't start :-(
Jun 16 08:39:48 <Christoph_> Any help would be much appreciated...
Jun 16 08:40:04 <LetoThe2nd> "doesn't start" means "it does literally nothing"? or what does it do, where does it stop, what are the messages?
Jun 16 08:44:56 <Christoph_> If you remember my Msgs from yesterday, the serial console output always stops at random service start messages e.g. " Starting Modem Manager". It seems that the start process freezes, but the board heart beats are "beating" and on LED 2 there's activity too. When I then try to login per SSH, it asks me for the username, then for the password, but after that there is no response...
Jun 16 08:50:12 <LetoThe2nd> so something in userland breaks. did you use the same kernel config as before?
Jun 16 08:54:25 <Christoph_> In the Kernel config dialog I added a driver (drivers - input - touchscreen: ft5x0x_ts). I need to use the nh5 cape
Jun 16 08:55:15 <LetoThe2nd> if i had to guess, i'd say that something is missing that systemd needs. so did you really grab a kernel config that worked before? or did you start off something else?
Jun 16 09:03:16 <Christoph_> hmm. I only used the skript. First build.sh and then rebuild.sh
Jun 16 09:03:48 <Christoph_> after a git clone https://github.com/RobertCNelson/bb-kernel.git
Jun 16 09:15:07 <Christoph_> I'm going to redo the steps on a fresh Virtual Box Debian machine
Jun 16 09:50:39 <Abhishek_> stt_michael: Recompiling rtl8192cu and hostapd worked
Jun 16 12:08:39 <stt_michael> Abhishek_, cool
Jun 16 12:10:46 <Abhishek_> using my BBB as an AP works as well
Jun 16 12:19:54 <stt_michael> I know citylight2 was doing a writeup on BBB-AP using the 8188eu driver too
Jun 16 12:20:10 <stt_michael> or another of the troublesome realtek cards :/
Jun 16 12:20:56 <citylight2> hi,
Jun 16 12:22:26 <citylight2> I just got a usb to four pin cable to connect to the serial
Jun 16 12:22:39 <citylight2> anyone know how to connect it
Jun 16 12:22:41 <citylight2> ?
Jun 16 12:23:21 <citylight2> o ok I found it
Jun 16 13:35:05 <citylight2> Abhishek : I am improving this now, please get in touch tomorrow
Jun 16 13:35:28 <citylight2> stt_michael could not get 8188 to work
Jun 16 13:37:04 <stt_michael> citylight2, ah ok .. so just the 8192 set?
Jun 16 13:43:25 <citylight2> no, sorry
Jun 16 14:00:14 <Ibrahim_> hello
Jun 16 14:00:30 <TvFred> Hi. BBwhite running ubuntu 12.04: how can I run automatically chromium-browser in kiosk mode as root after LXDE starts ??
Jun 16 14:00:44 <Ibrahim_> currently have an issue
Jun 16 14:00:51 <tbr> TvFred: that's essentially a ubuntu question
Jun 16 14:01:15 <TvFred> Also, is there a way to start chromium-browser without LXDE  ??
Jun 16 14:01:29 <TvFred> tbr: in effect......yes...
Jun 16 14:01:31 <Ibrahim_> for some reason 192.168.7.2:3000 is not working it just shows a blank page
Jun 16 14:01:56 <tbr> TvFred: so, might want to ask in some ubuntu place.
Jun 16 14:02:18 <tbr> Ibrahim_: did it work on this device with the currently running firmware before?
Jun 16 14:02:56 <TvFred> yes, maybe...
Jun 16 14:03:11 <Ibrahim_> nope never work
Jun 16 14:03:18 <Ibrahim_> since day one
Jun 16 14:03:30 <tbr> Ibrahim_: ok, so what are you running on the device?
Jun 16 14:04:17 <Ibrahim_> currently nothing
Jun 16 14:04:38 <tbr> well, if there's nothing then it won't even boot
Jun 16 14:04:40 <Ibrahim_> just started the start-up pocess
Jun 16 14:05:00 <tbr> so yes, then it will obviously not expose USB ethernet nor that service on port 3000 of that ip
Jun 16 14:05:04 <Ibrahim_> was able to access 192.168.7.2
Jun 16 14:05:19 <tbr> so you were running some OS on the device then?
Jun 16 14:05:30 <Ibrahim_> run the example code there
Jun 16 14:07:29 <Ibrahim_> i am a bit of novice
Jun 16 14:07:39 <Ibrahim_> to be honest
Jun 16 14:08:49 <Ibrahim_> my though was, clicking in the cloud9 ide, link on the 192.168.7.2, should give access to the cloud9 is that not the case?
Jun 16 14:10:36 <tbr> which operating system image are you running?
Jun 16 14:15:09 <tbr> I'll take that as "I don't know".
Jun 16 14:15:27 <tbr> → Please download and flash latest debian
Jun 16 14:15:37 <Ibrahim_> nope
Jun 16 14:16:11 <Ibrahim_> trying to figure out what exactly you are asking for
Jun 16 14:17:12 <Ibrahim_> actually debian image that I have is 2014-04-23
Jun 16 14:22:00 <tbr> seeing how that image is over a year old, you really should consider downloading something more recent
Jun 16 14:22:07 <tbr> either flasher or standalone
Jun 16 14:28:31 <Ibrahim_> Thanks tbr
Jun 16 14:40:22 <tbr> Ibrahim_: also I just tried a recent image of debian 7.8 with lxde and cloud9 comes up on port 3000
Jun 16 14:59:49 <daltonj82> hello I found a board and come to find out its a black beagleboard. my question is I tried to boot it off my windows laptop and windows isn't noticing it at all. I downloaded the drivers as needed but still nothing
Jun 16 15:00:33 <daltonj82> the board I got came from a flight radar 24 what it says on the black b9x
Jun 16 19:42:15 <Okular> How does the web interface get started? I would like to change the port number
Jun 16 19:43:37 <Okular> the apache server serves :8080, beaglebone 101 is on :80
Jun 16 19:44:11 <Okular> I have disabled apache2 but I am at the end with the other one. Can someone give me a hint?
Jun 16 19:51:35 <rcn-ee> Okular, bonescript.socket
Jun 16 19:52:32 <rcn-ee> systemctl disable bonescript.socket
Jun 16 20:03:10 <Okular> thanks
Jun 16 20:10:28 <Okular> rcn-ee: works perfect! thanks!
Jun 17 02:42:19 <n00brover> Hey guys can anyone help me with this?
Jun 17 02:42:32 <n00brover> I want to make rov undewater
Jun 17 02:42:55 <n00brover> Does any one know how to communicate between rov and the computer?
Jun 17 02:43:14 <n00brover> i was thinking of usb rs any other recomndations?
**** ENDING LOGGING AT Wed Jun 17 02:59:59 2015