**** BEGIN LOGGING AT Mon Aug 17 02:59:58 2015 Aug 17 03:43:38 My beagle bone black (godamn I wish there was a shorter identifier) keeps halting at "Running uenvcmd ..." when trying to boot a MD5 checked flasher image. As per the boot log:http://pastebin.com/wfbWYc1F and the uenv text file:http://pastebin.com/U1v6TY2E Aug 17 03:44:39 My beagle bone black (godamn I wish there was a shorter identifier) keeps halting at "Running uenvcmd ..." when trying to boot a MD5 checked flasher image. As per the boot log:http://pastebin.com/wfbWYc1F and the uenv text file:http://pastebin.com/U1v6TY2E Aug 17 04:05:29 MiddleMan: are you holding down S2 before applying power to the board? Aug 17 04:06:36 yes, I've also tried the proposed "reset and s2" and a couple other combinations. Same outcome Aug 17 04:08:38 no idea then Aug 17 04:23:10 sir Aug 17 04:23:41 is it possible to connect laptop display to view the beagllebone Aug 17 04:25:38 vengade no, your laptop only has an HDMI OUT Aug 17 04:25:53 an HDMI IN (such as on a monitor) is needed Aug 17 04:26:23 sir then its possible to connect it with desktop Aug 17 04:26:55 how to make sd card as extra storage device in beaglebone Aug 17 04:27:32 vengade yes, but you wouldn't be connecting it to the "desktop" just the monitor. If you have a micro HDMI to HDMI connector you can plug the beagle into any HDMI compatible monitor Aug 17 04:28:17 and you'd have to check to how-to guides. The IRC is less of a general help, and more of a conversation place Aug 17 04:29:13 k sir but am have micro hdmi to vga connector.with this any possibilty to connect with display Aug 17 04:30:08 Yes, connect that to a VGA monitor. It's simple enough. Find the monitor that has the connection, you'd have to look yourself, all monitors are different Aug 17 04:30:20 Heres the SD card expansion tutorial: http://elinux.org/Beagleboard:MicroSD_As_Extra_Storage Aug 17 04:31:30 sir i have connected like that..but it shows that platform is not supported Aug 17 04:32:34 vengade you're going to have to be a little more specific, read the IRC how-to guides and please post a little more info on you're problem Aug 17 04:33:39 how can i install ubuntu12.04 for beaglebone Aug 17 04:36:58 how can i install ubuntu12.04 for beaglebone Aug 17 06:35:33 hey guys Aug 17 06:35:56 What command do I need in order to access the angstrom desktop Aug 17 08:18:36 Hi, i'm using this how to : http://wiki.beyondlogic.org/index.php?title=BeagleBoneBlack_Building_Kernel#TFTP_Server but i'm stuck with the cmd tftpboot ... i'm running xubuntu, installed apt-get tftpd but tftpboot cmd is not found i've done same research but didn't find any solution can someone help me ? :/ thanks Aug 17 08:36:07 can someone help me with te tftp boot please ? Aug 17 09:01:20 How can i prevent kernel boot on my board and use u-boot shell ?? thanks Aug 17 10:03:38 Hey guys Aug 17 10:03:50 Is there anyone willing to help out a noob here? Aug 17 10:04:55 pls respond Aug 17 10:06:21 it helps if you ask Aug 17 10:06:25 instead of asking to ask Aug 17 10:06:56 paco___: you can do it using ftdi. I do use that. Before booting there will be option : press any key to stop autoboot. Then u will have u-boot shell. Hope this helps :) Aug 17 10:11:28 Thanks, i've found the solution didn't have the time to see at boot time, but just need to press any key before kernel boot Aug 17 10:13:02 but now i'm facing an other problem, my kernel was correctly download with uboot cmd line, but when i start the kernel i've this message and then nothing : [ 8.123795] No soundcards found. Aug 17 10:13:27 and after a long time : [ 313.578090] VFS: Unable to mount root fs via NFS, trying floppy. Aug 17 10:13:40 Fair enough. I'm trying to access the desktop on my BBB with angstrom Aug 17 10:14:00 Ive never used linux before and I cant seem to find useful information on google Aug 17 10:16:46 well that was a problem from my kernel config Aug 17 10:19:13 I'm trying to edit the default config bb.org_defconfig, to do so i'm using : make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- bb.org_defconfig and then : make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig, but it seems that it's not loading the default file i just initialize with the previous cmd .. what am i doing wrong ? Aug 17 10:20:37 Any ideas, guys? Aug 17 10:20:46 what's the correct way to edit a default config file for the BBB ? Aug 17 10:24:30 Angst_Intensifie : "linux basics" on google => http://www.ee.surrey.ac.uk/Teaching/Unix/ :), I recommend you the book from Dereck Molloy "Exploring BBB" it go step by step to undestand linux in the 1st chapter and using basics on the BBB Aug 17 11:11:20 Hello everyone Aug 17 11:11:50 Becase of some issues with the psp omap 2.4.32 kernel/isp driver, I'm trying to port our beagleboard to the later kernel version... Aug 17 11:12:06 2.6.32* Aug 17 11:12:13 Does anyone experienced having beagleboard running wit hYocto and in which version/meta? Aug 17 11:12:27 hope im in the right place to ask :) Aug 17 11:15:31 2.6.32 on a BBB? that's archeology Aug 17 11:18:24 Hi, I'm trying to edit the default config bb.org_defconfig, to do so i'm using : make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- bb.org_defconfig and then : make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig, but it seems that it's not loading the default file i just initialize with the previous cmd .. what am i doing wrong ? Aug 17 11:44:01 I've compile my 4.1.5 kernel for the BBB, i can boot it using TFTP, can someone give me a link or the trick to flash the eMMC with my custom kernel ? :) Aug 17 12:02:56 Please can someone answer to my question ? :( : How can we flash the eMMC from serial port using TFTP ? Is it possible ? Aug 17 12:04:07 you dont need to flash it Aug 17 12:04:13 just copy your custom kernel to the emmc Aug 17 12:05:29 i just need to copy the zImage to the emmc ? Aug 17 12:06:07 yes, replace the kernel with yours Aug 17 12:06:16 should be in some boot folder or so Aug 17 12:06:49 ok nice, i need to do it from uboot or when my kernel is boot from TFTP Aug 17 12:06:50 ? Aug 17 12:07:38 from linux Aug 17 12:07:43 running whatever kernel you want Aug 17 12:08:09 Ok, thanks i'll try that Aug 17 12:08:14 boot Aug 17 12:08:17 oops * Aug 17 12:48:36 Hi,I create a web interface which allows a user to control some leds.I create a nodejs server and I firstly tested this interface on the web browser of my pc.After that I configure the buildroot.But I want to move the application folder on beagleboneblack.How can I do that?? Aug 17 13:42:11 Hi Aug 17 13:44:07 hi Aug 17 13:44:29 What do youngsters use these days on a BBB? my ubuntu 13.10 is starting to feel old Aug 17 13:47:44 it looks like ubuntu (14.04.2) is still a good option http://elinux.org/BeagleBoardUbuntu#Demo_Image . I did never play with ubuntu core for example Aug 17 13:47:44 Debian. Aug 17 13:49:22 Hi, is there any Device Tree pro here ? I need to modify the am335x-boneblack.dts to remap I/O on the BBB (i don't want to use overlay, but to redefine the default conf), but that file is making me crazy so awkward >< Aug 17 13:51:20 agmlego: thanks It looks like I will be trying http://beagleboard.org/latest-images/ (debian flasher) Aug 17 13:51:52 Good, that would be the right one to use. Aug 17 13:52:08 Especially so, because debian is the supported distribution for the bone. Aug 17 13:53:38 it is just that BBB worked so well for me (running my mail on it for about 2 years .. now) but updates are getting slow Aug 17 13:57:41 well, 13.10 is EOL for quite some time already :) Aug 17 13:58:05 (you could just do-release-upgrade and be done ...) Aug 17 13:59:39 No device tree pro here? :( Aug 17 14:05:45 paco___: I guess not, first make it work as indented (e.g. use overlay). next if you feel like it , convert your dtb back to a dts and search for what you want to modify Aug 17 14:06:10 (e.g. dtc -i dtb -o dts in.dtb out.dts ) Aug 17 14:17:18 i've already done this with an overlay i'm trying to make it by default now, for production use Aug 17 18:18:21 I'm having an issue flashing a BBB with a flasher image. All LEDs instantly flash solid. I took a capture of the boot log here: http://pastebin.com/wfbWYc1F and my uenv.txt file it references:http://pastebin.com/Ph4AXnpe Aug 17 19:55:09 My BBB gets reboot when interrupt occurs. What can be possible reasons ? **** ENDING LOGGING AT Tue Aug 18 02:59:58 2015