**** BEGIN LOGGING AT Tue Sep 01 02:59:58 2015
Sep 01 04:51:05 <peoliye> fatload mmc 0:1 0x80008000 zImage && fatload mmc 0:1 0x81000000 omap3-beagle.dtb
Sep 01 04:51:13 <peoliye> bootz 0x80008000 - 0x81000000
Sep 01 04:56:48 <peoliye> this is giving me "Warning: Neither atags nor dtb found"
Sep 01 04:56:59 <peoliye> any pointers will be appreciated.
Sep 01 04:57:58 <ds2> provide proper atags or a DTB
Sep 01 05:02:44 <peoliye> ds2: i did and i have used this "fatload mmc 0:1 0x81000000 omap3-beagle.dtb"
Sep 01 06:16:27 <Bartos> Hello
Sep 01 06:16:58 <Bartos> I have Problems installing Bone64 Drivers on Windows 10
Sep 01 06:47:02 <ds2> is the image setup to look for a DTB there?
Sep 01 08:33:10 <peoliye> https://goo.gl/aemcLV was wondering if anyone has seen this problem. I just posted it in beagle board support forum.
Sep 01 08:38:12 <ecank1> hi, is there an open-source driver support for 4DCAPE-70T expansion of bbb
Sep 01 08:38:49 <ecank1> I don't mean Angstrom image, for linux kernel?
Sep 01 08:41:57 <samael> veremit: i was the 485 transmit control via GPIO guy still using 3.8 (just giving a quick read to the backlog)
Sep 01 08:42:43 <samael> iiuc, still there is no such support in 8250_omap
Sep 01 09:53:27 <dev_> i have problem in u-boot in beagle bone black.unable to boot u-boot still screen blank..
Sep 01 09:54:04 <dev_> how to find out errors?
Sep 01 10:00:43 <tbr> if you mess with u-boot, use serial console or GTFO
Sep 01 10:22:21 <peter_l> Hi. I have a BBB. So far I have one virtual cape to run http://mythopoeic.org/bbb-pru-minimal/'s simple demo of PRU. I now want to do the ADC example in Molloy's Ch 13. However when I try to put the 2nd virtual cap into the 'slots' file, I get told it already exists. How can I have more than one virtual cape?
Sep 01 12:51:17 <Gwak> Hi, I've compiled a kernel based on omap2plus_config and some change have made, CONFIG_CPUFREQ_DT is enabled (Generic DT based cpufreqd driver)
Sep 01 12:51:41 <Gwak> but i'm having an error when I use cpufreq-info : no or unknown cpufreq driver is active on this CPU
Sep 01 12:58:13 <Gwak> any idea ?
Sep 01 13:39:32 <Gwak> How can i let the beaglebone booted from TFTP/NFS access to a symlink to kernel sources ? actually it return No such file or directory
Sep 01 14:02:51 <Guest46287> Could u help me to check Beagle board (Processor OMP3530 , 720MHZ)
Sep 01 14:03:31 <Guest46287> for 1pcs
Sep 01 14:39:30 <av500> wat?
Sep 01 14:58:03 <citylight2> is repos.rcn-ee.com down?
Sep 01 14:59:27 <citylight2> hmm, seems ok
Sep 01 15:01:56 <Gwak> Where can I think the correct LOADADDR for the kernel ? Was booting from tftp with 0x80008000 and using uImage, i'm now trying to get this work with the zImage but bootz 0x80008000 reach Data Abort
Sep 01 16:15:31 <CNB_> So i need help installing my drivers
Sep 01 16:15:59 <CNB_> I install them and it says that everything had failed to install
Sep 01 16:24:22 <agmlego> CNB_: It would be neat if you shared any further information. As it is, my crystal ball is silent.
Sep 01 16:29:13 <rcn-ee> it's probally the windows drivers, the key expired, jason's waiting the windows key provider.. godaddy?
Sep 01 16:35:53 <CNB_> So, what happens is after I plug it in, I go to install the drivers for x64 Windows, and it goes through the installer, then skips to the end and where there should be a list of green check marks saying each element got installed properly, theres a list of red X marks saying each element failed to install
Sep 01 16:41:09 <rcn-ee> CNB_, yeap, the windows 'signing key' for the drivers installed, bb.org is just waiting for an updated key from godaddy..
Sep 01 16:41:19 <rcn-ee> "installed/expired"...
Sep 01 16:47:54 <CNB_> why godaddy?
Sep 01 16:54:51 <rcn-ee> CNB_, no idea... it's a windows thing you have to do for "signed drivers"...
Sep 01 16:55:13 <rcn-ee> You can always flip the windows switch to "disable" signed drivers...
Sep 01 17:06:44 <vagrantc> rcn-ee: did you have to do any patching for the usb-mass-storage patches? i'm getting a failure to build with recent debian
Sep 01 17:07:09 <vagrantc> rcn-ee: regarding u-boot, that is
Sep 01 17:07:10 <rcn-ee> vagrantc, yeah the renamed the config, even churn.. ;)
Sep 01 17:07:53 <vagrantc> ah, usb_gadget -> usb_function ?
Sep 01 17:08:09 <rcn-ee> CONFIG_USB_GADGET_MASS_STORAGE -> CONFIG_USB_FUNCTION_MASS_STORAGE
Sep 01 17:08:56 <rcn-ee> i saw it in the patch, but needed to fully bisect it..  my eye's just didn't see that GADGET -> FUNCTION replace...
Sep 01 17:10:12 <rcn-ee> and if you use the gpio's (not sure if you do) you need to revert this part too: https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/next/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch#L22-L43
Sep 01 17:10:23 <vagrantc> rcn-ee: well, thanks for doing the work! :)
Sep 01 17:10:41 <rcn-ee> haven't figured out how the use the "led" names from the dts imported into u-boot yet..
Sep 01 17:11:22 <vagrantc> other than switching to config_distro_bootcmd and the usb-mass-storage patch, i've tried to keep it to mainline
Sep 01 17:11:30 <vagrantc> which i really need to upstream...
Sep 01 17:12:24 <rcn-ee> another user posted another config_distro_bootcmd patch for am335x_evm, it's getting close..
Sep 01 17:13:11 <vagrantc> the hard part is getting upstream to accept uEnv.txt in a useful place ... although that's maybe gotten easier
Sep 01 17:13:21 <vagrantc> there are a few more hooks now
Sep 01 17:14:31 <rcn-ee> and for the x15, those hooks will make it easier... my loops for checking usb/sata/eMMC and then microSD are a little insane at the moment..
Sep 01 17:54:47 <citylight2> rcn-ee: got your green?
Sep 01 17:55:08 <rcn-ee> citylight2, nope not yet, proball be there after lunch (about an hour)
Sep 01 17:55:18 <citylight2> did anyone here managed to run hostapd on his bone?
Sep 01 17:55:34 <citylight2> did anyone here managed to run hostapd using realtek/
Sep 01 17:56:19 <citylight2> at the end all it took was to flash jessie 8.0 and export pin 2 to get the "groove" connect to work
Sep 01 17:56:27 <citylight2> no need for any dts
Sep 01 17:57:41 <citylight2> as for using 4.1, I did not understand where to get the config-pin from
Sep 01 17:57:46 <citylight2> then found the git
Sep 01 17:58:29 <rcn-ee> i think you grabbed the console image, only the lxqt as config-pin completely setup..
Sep 01 17:58:55 <citylight2> when I upgraded wheezy with 4.1.6 kernel and try to run the universal tool, I still got errors for config-pin P9_22 hi
Sep 01 17:59:08 <citylight2> I see
Sep 01 18:02:28 <citylight2> so the atheros based wifi is very big, so i am using the edimax EW-7811UN, and I google how to run a hot spot using it
Sep 01 18:04:07 <citylight2> but every time I complie it and run it I get an error for a missing driver
Sep 01 18:23:22 <citylight2> my error: l2_packet_init: ioctl[SIOCGIFINDEX]: No such device
Sep 01 19:35:25 <rcn-ee> citylight2, green works fine with 2015-08-31
Sep 01 19:36:08 <rcn-ee> eeprom is correct: eeprom raw: [00000000  aa 55 33 ee 41 33 33 35  42 4e 4c 54 1a 00 00 00  |.U3.A335BNLT....|]
Sep 01 20:09:41 <rmull> Is the TI AM335x Starter Kit a platform that is discussed in this channel?
Sep 01 20:15:50 <veremit> it kinda IS the beaglebone .. lol
Sep 01 20:16:13 <veremit> rcn-ee .. got ur 'green' then .. ;)
Sep 01 20:16:40 <rcn-ee> yap i did
Sep 01 20:18:29 <veremit> anythint noteable?
Sep 01 20:18:34 <veremit> s/t/g
Sep 01 20:19:42 <rcn-ee> oddly, after all the emails between seed, and i... it works. ;)  it's missing a curve ball...
Sep 01 20:20:07 <citylight2> rcn-ee: great! I am going to install the first green in my water heater position
Sep 01 20:48:20 <veremit> lol
Sep 01 20:48:27 <veremit> citylight2 .. inside the tank?! rofl :p
Sep 01 20:58:00 <citylight2> veremit: remember that red light and button you press to heater your shower water?
Sep 01 20:58:19 <veremit> uhoh .. go on .. lol
Sep 01 20:58:23 <citylight2> so using a relay and a bbb I have REST api to it
Sep 01 20:59:34 <veremit> ah you have a different system
Sep 01 20:59:41 <citylight2> I will then have REST to the Shutter
Sep 01 20:59:56 <citylight2> so it will close when I leave home
Sep 01 21:00:19 <citylight2> not so sure where ext though
Sep 01 21:31:58 <James_Johnson> hey all, I’m trying to create a devicetree fragment to work with the PRU cape, but it’s not setting any of the pins to the correct mode. pastebin’d here: http://pastebin.ca/3147752
Sep 01 21:32:34 <James_Johnson> dmesg doesn’t show any errors
Sep 01 21:32:42 <James_Johnson> if anyone has any idea, I would be immensely appreciative
Sep 01 21:41:27 <babak_> Hi does anybody use vnc please?
Sep 01 21:41:48 <babak_> I hewball ve _av500_  question
Sep 01 21:42:12 <babak_> I have a question
Sep 01 21:42:14 <rob_w> babak_, yes
Sep 01 21:42:58 <babak_> rob_w I wrote a script in Tcl/tk but I can not run it in startup
Sep 01 21:43:16 <babak_> xstartup is actually ignored
Sep 01 21:43:57 <babak_> have you got an idea rob ?
Sep 01 21:44:01 <rob_w> well
Sep 01 21:44:13 <rob_w> that is a distro thingi i guess
Sep 01 21:44:25 <rob_w> so do you run x11vnc or a Xvnc server ?
Sep 01 21:44:28 <babak_> which distro u use?
Sep 01 21:44:38 <rob_w> rob_w_distro
Sep 01 21:45:13 <babak_> Xvnc is launched in init.d
Sep 01 21:45:25 <rob_w> i bascily take core-minimal poky images and build them up
Sep 01 21:45:48 <babak_> but I would like to launch my script when the client logs in
Sep 01 21:46:20 <rob_w>  my .profile is way to go ?
Sep 01 21:47:55 <babak_> I can not use .profile beacause the client can log in via ssh. with no X running
Sep 01 21:48:33 <babak_> and I am not sure it works either
Sep 01 21:49:24 <babak_> what do you mean by core-minimal poky images?
Sep 01 21:50:35 <rob_w> poky is a way to build your own packages , hence roll your own distro
Sep 01 22:30:03 <James_Johnson> OK, so that dts sets pins fine for an older custom 3.8.13 kernel I compiled a while back but not for the 3.8.13 kernel currently in the BB repo
Sep 01 22:30:11 <James_Johnson> I would just like to say I hate computers.
Sep 01 22:41:02 <veremit> James_Johnson .. there's a device-tree compiler about somewhere
Sep 01 22:41:37 <James_Johnson> veremit I mean yeah, I’m compiling these dts files into dtbos before loading them
Sep 01 22:41:56 <veremit> no no .. there's a tool for creating device tree files
Sep 01 22:42:40 <James_Johnson> I mean, the pin offsets & modes match what they’re supposed to
Sep 01 22:49:43 <James_Johnson> eh, copying the boot dtb files from the old image let me mux the pins like I needed. I’ll leave it for now.
**** ENDING LOGGING AT Wed Sep 02 02:59:58 2015