**** BEGIN LOGGING AT Sun Dec 06 02:59:58 2015
Dec 06 11:25:39 <vinoth> hi
Dec 06 11:25:58 <vinoth> i Just reflashed my beaglebone emmc
Dec 06 11:26:10 <vinoth> i am not able to do ssh after this
Dec 06 11:27:05 <tbr> are the leds blinking?
Dec 06 11:27:15 <vinoth> yes..
Dec 06 11:27:35 <vinoth> @    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
Dec 06 11:27:39 <vinoth> i am getting this mesg
Dec 06 11:30:08 <vinoth> hi
Dec 06 11:30:17 <vinoth> i googled it  and found the solution
Dec 06 11:30:22 <vinoth> thanks anyway
Dec 06 11:31:04 <tbr> duh
Dec 06 11:31:09 <tbr> yeah, that's rather obvious
Dec 06 13:41:02 <AbMi> Hello
Dec 06 17:04:29 <samael> what is the advised kernel to use on bbb currently?
Dec 06 17:17:30 <agmlego> Linux.
Dec 06 17:24:08 <samael> ok, let's try to be more specific: mainline 4.3, mainline lts, -ti, or 3.8? can't seem to find an up-to-date document with the explanations
Dec 06 17:25:40 <agmlego> I recommend using the one that gives you the features you need for your application.
Dec 06 17:27:23 <tbr> personally I'd go with latest mainline
Dec 06 17:27:47 <tbr> there are some things that might need a ti kernel
Dec 06 17:29:56 <samael> for this specific application, i need a wifi usb dongle to work. i'm using 3.8 on all my production machines, because i deplyed the whole system a couple years ago. but they suffer usb problems, so i guess it's better to avoid 3.8
Dec 06 17:30:22 <samael> i heard -ti kernels have specific usb patches. do they behave better than mainline, still?
Dec 06 17:39:35 <tbr> the delta is fairly small nowadays. not sure if it has usb-related things.
Dec 06 17:45:08 <samael> ok, i'll start with mainline. thanks
Dec 06 22:18:19 <froggyman> anyone here play with the BBB's PRUs?
Dec 06 22:18:34 <froggyman> I can't for the life of me figure out to run C code on the PRU
Dec 06 22:18:59 <froggyman> I can load an assembly program without much issue, and can compile a PRU C program in CCS6
Dec 06 22:20:30 <froggyman> wait, I found this: https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/403440
Dec 06 23:20:15 <picard> i'm trying to get an xbee module working on a BBB using the nimbelink cape. Anyone have any tips ?
Dec 06 23:20:35 <picard> seems the UART isn't acting properly
Dec 07 01:51:57 <pod> hey folks, I'm having issues w/ a beaglebone black not wanting to mount an sd card
Dec 07 01:52:40 <pod> the card mounts elsewhere, and I just repartitioned it, but when I insert it into the beaglebone I see "error whilst initializing SD card"
Dec 07 01:55:03 <pod> huh interestingly enough I have a USB SD card reader which works
**** ENDING LOGGING AT Mon Dec 07 02:59:58 2015