**** BEGIN LOGGING AT Fri Jun 24 02:59:58 2016
Jun 24 09:17:03 <MOP_> Hi, I have a SBC8530 board (compatible with BeagleBoard-xM). Does its kernel compiled by omap2plus_defconfig? (3.14 or 4.x) And is DTS omap3-beagle-xm.dtb?
Jun 24 13:26:19 <_newtolinux> I'm new to linux and I can't connect to my BBB with ssh ssh 192.168.9.2 ssh: connect to host 192.168.9.2 port 22: No route to host
Jun 24 13:27:22 <_newtolinux> I ran the mkudevrules but that didn't change anything
Jun 24 13:27:30 <_newtolinux> the usb mounts fine but ssh won't work
Jun 24 13:27:56 <Defiant> was the default ip not .7.2?
Jun 24 13:28:29 <_newtolinux> ssh 192.168.7.2 ssh: connect to host 192.168.7.2 port 22: No route to host
Jun 24 13:28:40 <_newtolinux> yeah got that wrong but still not working :(
Jun 24 13:28:44 <_newtolinux> thanks though
Jun 24 13:31:31 <Defiant> _newtolinux: better check on your PC if you have a network interface in the 192.168.7.0 net
Jun 24 13:31:38 <Defiant> usually usb0 or something
Jun 24 13:32:41 <_newtolinux> I ran ifconfig and there's no usb0 there.
Jun 24 13:33:20 <Defiant> rty ifconfig -a
Jun 24 13:33:23 <Defiant> *try
Jun 24 13:34:19 <_newtolinux> doesn't look like it. just enp and wlp which I understand is my NIC and wireless
Jun 24 13:43:02 <Defiant> _newtolinux: did you replug the device after mkudev?
Jun 24 13:43:07 <Defiant> sry gtg
Jun 24 17:19:05 <belgin> hello
Jun 24 17:21:37 <belgin> any idea how I may describe pixel geometry in xorg.conf? my monitor displays flipped red and blue via hdmi on bbb
Jun 24 18:00:58 <zmatt> belgin-the-impatient should have configured 16bpp :P
Jun 24 18:08:27 <veremit> yea known issue :D
Jun 24 18:09:56 <zmatt> although I'm not sure why the remaining 8 bit lines weren't connected to the HDMI framer to also allow 24bpp to be supported (swapping the red and blue channels can also be done by the hdmi framer)
Jun 24 18:10:23 <veremit> -shrug-
Jun 24 18:11:29 <zmatt> although, I'm not sure whether the framer can be configured to ignore the low-order bits, so then reusing those pins for other purposes would cause noise in the less significant bits... which may or may not be annoying, not sure
Jun 24 18:35:31 <veremit> zmatt: how many bits are on the Px headers .. are all 24 there. . or is it 20 or something. . I forget what we were using on our lvds serializer
Jun 24 18:35:44 <veremit> maybe just 18
Jun 24 18:36:47 <zmatt> all 24 are there
Jun 24 18:37:34 <veremit> possibly too much of a routing challenge then
Jun 24 18:37:44 <zmatt> maybe
Jun 24 18:37:44 <veremit> or more hdmi 'noise'
Jun 24 21:49:19 <Sandy__> Hello.. So is it at all possible to have an ad-hoc and an infrastructure wifi? Similar to chromecast?
Jun 24 23:47:06 <Geof> Hi, does anyone have a step or 3d model of the Beaglebone Green?
**** ENDING LOGGING AT Sat Jun 25 02:59:58 2016