**** BEGIN LOGGING AT Thu Aug 11 02:59:58 2016
Aug 11 05:35:58 <Andresing> Good day
Aug 11 05:39:52 <Andresing> I have a beagleboard xm Rev C, but not start the system Ubuntu appears an image orange
Aug 11 05:41:59 <Andresing> as I set the output resolution
Aug 11 05:43:48 <Andresing> I tested three brands of TVs
Aug 11 05:44:17 <Andresing> Sony, Panasonic y LG
Aug 11 05:45:15 <Andresing> Help Please
Aug 11 05:48:48 <Andresing> what should I do?
Aug 11 05:54:01 <Andresing> Mi bbxm no pasa de un pantallazo naranja
Aug 11 05:54:28 <Andresing> Problemas de compatibilidad con los televisores
Aug 11 05:54:39 <Andresing> Resolución seguro
Aug 11 10:09:50 <pyBlob> I want to cross-compile code for the beagle-bone on my ubuntu machine, I've been following "http://www.cnx-software.com/2012/05/02/getting-started-with-multiarch-armel-armhf-in-ubuntu/"
Aug 11 10:10:55 <pyBlob> as the beaglebone uses armhf instead of armel, I've replaced them, and my beaglebone  is running debian, so I've used the entries of the sources.list from my beaglebone
Aug 11 10:11:49 <pyBlob> cross-compiling works now for simple stuff, but when I want to use libraries, it can't find them
Aug 11 10:13:28 <pyBlob> for example, I can't install "libi2c-dev:armhf", as it doesn't find it, however it is on the beaglebone and I can install it in ubuntu too
Aug 11 10:36:08 <mk_> hi everyone, i am using debian 8.4-lxqt-4gb-armhf in my bbb. i just wanted to ask that is opencv-2.4.9.1 is already built in/installed in this version of debian?
Aug 11 12:01:36 <pyBlob> How do you install libraries, so that they get included by the armhf cross-compiler?
Aug 11 12:07:53 <KotH> you make a package in your buildenvironment
Aug 11 12:45:00 <pyBlob> ok, so the actual question: how do I set up the build environment correclty
Aug 11 12:45:07 <pyBlob> *correctly
Aug 11 13:07:45 * KotH pokes NishanthMenon with some chocolate
Aug 11 13:08:07 <KotH> pyBlob: that largely depends on the buildenvironement you are using
Aug 11 13:08:24 * NishanthMenon wakes up
Aug 11 13:08:45 * KotH hands NishanthMenon a cup of hot chocolate
Aug 11 13:08:51 <pyBlob> currently I'm using cmake and a very simple toolchain file
Aug 11 13:09:09 <KotH> oh, you are building your own buildenvironment
Aug 11 13:09:15 <KotH> you are very brave!
Aug 11 15:19:59 <andresing> good day
Aug 11 15:24:41 <andresing> I have a beagleboard-Xm configured as in mentioned page http://elinux.org/BeagleBoardUbuntu
Aug 11 15:26:04 <andresing> now only appears orange screen
Aug 11 15:26:32 <andresing> previously it worked in TV
Aug 11 15:27:17 <andresing> I tried on brands like Sony, LG and Panasonic
Aug 11 15:29:16 <andresing> It must be some resolution or configuration configuration files installation SO
Aug 11 15:29:45 <tbr> andresing: HDMI or composite?
Aug 11 15:29:59 <andresing> Hdmi
Aug 11 15:30:14 <tbr> then if you see orange, it's getting a signal
Aug 11 15:30:52 <andresing> anteriormente salia configurada una resolución de 1280 x 1024 y se observaba el sistema
Aug 11 15:32:26 <tbr> could you repeat that in english?
Aug 11 15:34:03 <andresing> previously showed a resolution of 1280 x 1024 and it was observed the system normally
Aug 11 15:35:25 <andresing> now only orange screen and does not advance
Aug 11 15:39:00 <tbr> I guess previously you had a different release of ubuntu?
Aug 11 15:39:37 <tbr> I suspect the image content has changed. You might need to log in through serial or network and install a desktop manager
Aug 11 15:40:02 <tbr> http://elinux.org/BeagleBoardUbuntu#Lightweight_window_managers
Aug 11 15:43:24 <andresing> i have two MicroSd, one with Ubuntu 14.04 lts and other with Ubuntu 16.04
Aug 11 15:44:11 <andresing> I had always used the Ubuntu 14.04
Aug 11 15:46:22 <andresing> was showing the penguin and entered the system
Aug 11 15:52:19 <andresing> previously when appeared the screen orange, changed the TV and it worked normally
Aug 11 15:54:22 <tbr> do you have access to the serial port output?
Aug 11 15:55:57 <andresing> i need the cable Utp crossed...
Aug 11 15:56:07 <andresing> Rx -Tx
Aug 11 16:26:16 <andresing> resetting the Tv of fabric
Aug 11 17:05:11 <andresing> What archive i should modify into the Ubuntu for changed the resolution and frequency?
Aug 11 17:33:32 <Humanoid> The final X15 revision is taking a long time to come out.  Is this normal?  Or is it much longer than it takes other boards to come out?
Aug 11 17:34:31 <tbr> it's normal for every board with CCo and TI being involved
Aug 11 17:35:51 <tbr> andresing: there seem to be several options depending on kernel version, etc. dvimode=   video=omapfb:mode: etc. you'll have to try which one works for the kernel version you are running. see also  http://elinux.org/BeagleBoardFAQ#Display_resolutions_.231
Aug 11 17:37:41 <andresing> thank
Aug 11 17:41:17 <Humanoid> CCo = ?, Chief compliance officer?
Aug 11 17:45:50 <tbr> Humanoid: the company producing the board
Aug 11 17:47:46 <Humanoid> Did the other boards (BB, BBXM, Bone, BoneBlack) also take this long to make?
Aug 11 17:51:20 <tbr> not this long, I think. Though delays were normal.
Aug 11 18:24:28 <david-e> hi all, can't get anything out of /dev/spidev1.0 : it works with debian but not on my minimal buildroot image. how can I investigate this?
Aug 11 18:32:56 <tbr> david-e: are you sure the spi pins are muxed correctly?
Aug 11 18:38:16 <david-e> tbr: how can I check ? I'm new to all of this, so I might be missing something obvious for others. I struggled to get /dev/spidev1.0 (and you've helped me already...)
Aug 11 18:38:58 <tbr> are you sure your device tree has the pins assigned and muxed properly?
Aug 11 18:39:32 <david-e> tbr: no, I'm not sure. can you suggest me how to check it?
Aug 11 18:43:23 <tbr> david-e: apparently http://xillybus.com/tutorials/device-tree-zynq-1 covers reversing a device tree from /proc/device-tree/
Aug 11 18:44:11 <david-e> tbr: thanx for the link, I managed to reverse it a few days ago: let me find my notes
Aug 11 18:55:56 <david-e> tbr: http://pastebin.com/vKSgvsPh
Aug 11 18:57:06 <david-e> tbr: I'm on linux 4.4.15
Aug 12 01:09:13 <Tenacious-Techhu> Any ETA on the Beablebone Blue?
Aug 12 01:10:41 <veremit> that be something only jkridner can answer I think
Aug 12 01:11:36 <Tenacious-Techhu> Quite possibly.
Aug 12 01:11:54 <Tenacious-Techhu> I’ve been waiting since probably Christmas.
Aug 12 01:12:06 <Tenacious-Techhu> They said something about a spring release date. :P
Aug 12 01:13:07 <veremit> yeah think tghere's been complications with their partners
Aug 12 01:13:33 <veremit> at least its not the EMC/FCC approval that's plagued the x15 so far
Aug 12 01:13:59 <veremit> I think I have schematics somewhere ...
Aug 12 01:14:35 <veremit> .. yeah they're dated December 2015
Aug 12 01:16:20 <Tenacious-Techhu> FCC approval is what spectrum analyzers are for...
Aug 12 01:16:45 <Tenacious-Techhu> Every good hackerspace should have one, in principle. Practice, however, is different.
Aug 12 01:25:24 <ds2> having a spectrum analyzer is one thing.... knowing how to use it is a totally different ballgame
**** ENDING LOGGING AT Fri Aug 12 02:59:58 2016