**** BEGIN LOGGING AT Sun Feb 12 03:00:02 2017 Feb 12 03:48:35 Hi, any idea how to bypass-remove connman/avahi and do my network with tools i use for years? Feb 12 03:49:24 I have feeling having virus on my system with this changes :) Feb 12 03:50:26 I used BB with dnsmasq as small local dns server in combination with open nic DNS services Feb 12 03:52:02 This is output from ss network command:https://paste.lugons.org/?f9cac08f5d783a77#nUPVy+doktM+WN4DInndXbk6c/b6V9ZYNiP5eI5yhT4= Feb 12 03:54:15 I tested removing connman, but don't do that ever, you will lose hand on your system even if you set static ip and set manualy nameservers in resolv.conf Feb 12 03:55:27 I didn't try to lock resolv.conf, but as I remember, you can't do that now, or you need to force chattr with option -f or something like that. Feb 12 03:57:11 I'm open for any idea .. will be back in few hours of dream. Thanks Feb 12 05:52:37 Hi all Feb 12 05:53:06 How to install kernel-headers for beaglebone black Feb 12 19:30:25 Anyone have luck yet getting the wireless on the BBGW to come up under Arch? Feb 13 01:06:13 hello people - trying to reconfigure my BeagleBone to enable RS485 communications. Anyone available to sanity check what I am doing? Feb 13 01:22:00 I know there are people successfully using it Feb 13 01:22:10 haven't looked into it myself though Feb 13 02:23:27 I am trying to use P8.19 with UART2 to flip the transmit state of a RS485 transceiver during sends Feb 13 02:23:32 Here is the overlay Feb 13 02:23:33 https://gist.github.com/jonseymour/29a507598148468d5d1d70e4750dce86 Feb 13 02:23:51 I am unsure about a few things Feb 13 02:24:10 what is the second parameter of 0xdeadbeef 0x13 0x1 meant to correspond to? Feb 13 02:24:14 e.g. the 0x13 Feb 13 02:25:26 I see one error - uart4 should be uart2 - I will fix that. Feb 13 02:28:12 this looks like someone decompiled a .dtbo instead of using the source code Feb 13 02:28:20 actually, that's exactly what it is Feb 13 02:29:25 the __symbols__ and stuff below that is information for the kernel for fixing up those 0xdeadbeef values Feb 13 02:29:51 dtc isn't smart enough to use that during decompilation Feb 13 02:30:30 https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART4-RS485-00A0.dts Feb 13 02:30:35 ok, I'll start with the source. Feb 13 02:30:36 looks like that might be the source code Feb 13 02:31:26 still looks like a mess to me, but less so than before Feb 13 02:34:00 it doesn't say whether this is for the 8250-omap driver or the omap-serial driver, I think I've seen people use either of those for rs485 and I wouldn't be entirely surprised if they have different DT config Feb 13 02:35:23 #beagle Feb 13 02:36:05 thanks zmatt, I'll try with a variant of the UART4-RS485 source and see if that produces a better result. Feb 13 02:36:15 ah you lost connection? which part did you miss? Feb 13 02:36:37 * zmatt has join/quit messages on ignore here, too spammy **** ENDING LOGGING AT Mon Feb 13 03:00:01 2017