**** BEGIN LOGGING AT Wed Apr 26 03:00:02 2017 Apr 26 03:00:02 I tried that. It is a no-go. Apr 26 03:00:12 I will try again and get back in a jiff. Apr 26 03:00:18 note that each overlay enables two pwm outputs Apr 26 03:00:24 Okay. Apr 26 03:00:24 also.... Apr 26 03:00:32 And? Apr 26 03:00:41 04:24 < zmatt> besides, I thought you were going to use cape-universal instead of an overlay? Apr 26 03:01:01 cape-univeral states an error. Apr 26 03:01:05 I have to try another route. Apr 26 03:01:26 cape-universal is enabled by default normally (last time I checked) Apr 26 03:01:36 I am going to disable it. Apr 26 03:01:39 This time! Apr 26 03:01:49 eh Apr 26 03:02:12 whatever, I'm going to try to do something useful Apr 26 03:02:21 I am going to disable cape-univeral and type in the overlay stuff, i.e. separated by da' commas. Apr 26 03:02:23 Cool! Apr 26 03:02:32 Useful! Apr 26 03:12:54 I found some 3.8 kernel info. but I could not find the 4.1.x kernel info. Help! Apr 26 03:12:54 ... Apr 26 03:13:53 https://github.com/beagleboard/kernel/tree/3.8 works! This does not work: https://github.com/beagleboard/kernel/tree/4.1 Apr 26 04:34:45 hi Apr 26 04:34:51 in energia board manager how to install energia g2553 board Apr 26 04:35:20 msp430 g2553 board Apr 26 06:31:24 anyone available for a failed .dtb compilation issue please ? Apr 26 07:15:13 that dtc compiler is pretty gnarly eh Apr 26 07:54:23 hello Apr 26 07:58:23 mau. Apr 26 07:58:41 i connected my beagleboardblack with usb cable, then point my browser to http://192.168.7.2 and i get a network timeout Apr 26 07:59:01 what do i do wrong? Apr 26 07:59:26 check the list of your interfaces to see if the interface actually came up. Apr 26 08:00:44 i have BeagleBone Getting Started (E:) as the drive like the description say Apr 26 08:01:24 you'r on windows? Apr 26 08:01:29 where can i check the list of interfaces in Win10? Apr 26 08:01:46 yep on win 10 Apr 26 08:01:47 then I'm out. can not help you with that. sorry. Apr 26 08:01:54 maybe someone else can. Apr 26 08:02:00 ok, thanks a lot Apr 26 08:02:25 but if you got the volume mounted ('E:') the OS on the board is up at least. so it's booting. Apr 26 08:02:48 yep it boots, LED's flashing wild Apr 26 08:03:28 the error is in browser: Network imed out! Apr 26 08:04:10 it looks like no http service running on http://192.168.7.2 Apr 26 08:04:23 like described in Manual Apr 26 08:04:52 lets try a ping Apr 26 08:05:21 I sometimes had the problem that the DHCPd on the board did not work as expected. I would guess that something similar happend to you. Apr 26 08:05:38 ping also gives network timeout, so its a routing problem Apr 26 08:05:58 basically what I did was setting up the interface manually with a little script I wrote (it also altered firewall settings and stuff like that, so I had to run it anyway). Apr 26 08:06:35 is there any way to get an ssh-console on the bbb Apr 26 08:06:38 ? Apr 26 08:07:00 from my putty? Apr 26 08:07:00 as soon as the network is working ;) Apr 26 08:07:09 yep Apr 26 08:07:15 then yes. Apr 26 08:07:27 you can also connect to it's console. it exports a virtual serial port. Apr 26 08:08:30 how to do that? Apr 26 08:08:54 i already installed the driver for Win10x64 Apr 26 08:09:16 like described in manual Apr 26 08:10:26 as I said. I can hardly help you with win. Apr 26 08:11:23 ok, thanks anyway. i think i get a mini hdmi cable and hook up monitor and keyboard to fix network. Apr 26 08:14:24 ok. Apr 26 08:32:10 hi Apr 26 09:16:59 hi Apr 26 09:18:39 I am using TI AM335x BeagleBone Black. I tried to wake board using rtcwake from suspend-to-memory, but it fails. Apr 26 09:19:22 It remained in suspened mode. Apr 26 09:20:04 Any reason , why board doesn't wake using rtc alarm. Apr 26 09:56:14 ayjay_t : are you referring to compilig issue ??? I always compiled my own dtb file , now it doesn't work....syntax error Apr 26 11:37:09 Hi all Apr 26 11:38:41 Who should I contact about purchasing 1000 BeagleboneBlack 4G's Apr 26 12:18:59 Hi Guys, I am using the pins p9.24 and p9.26 for CAN1. It is working but p9.19 and p9.20 are not working for CAN0. Any one has overlay file for this? Apr 26 12:19:54 I am using BeagleBone wireless green. kernal 4.4.9. Apr 26 13:03:44 Hi Apr 26 13:04:48 I need help on beagle bone Apr 26 13:48:47 Guys, any one is available to answer my question? Atleast any say, is it possible to use P9.19 and P9.20 for CAN0? Apr 26 14:00:12 Raj_: read the TRM and the schematics Apr 26 14:15:04 @KotH, all says yes to go but not working Apr 26 14:15:34 It seems EEPROM uses these pins. I am not sure. Nowhere it is specified. Apr 26 14:15:57 Raj_: the schematics would tell you that Apr 26 15:06:36 Is there any documentation to manage LCD 2X16 i2c on beaglebone ?? Apr 26 15:34:44 Hey guys im here wondering about ethernet issues. Apr 26 15:35:26 is there an easy way to reset the TPS61257 chip via software on detection of phy address not at 0? Apr 26 15:35:49 65217* Apr 26 15:46:17 I thought that problem was solved on current kernels? Apr 26 16:11:09 Hi, I upgrade my nodejs on beaglebone black but now i can no longer access the browser. can someone help me please? Apr 26 16:16:31 is there anyway to reset the the board via software control of the TPS65217? Apr 26 16:42:36 hello everyone... I am hoping you can help me, I am trying to compile a qt program over SSH and I keep getting a error: QFileSystemEngine::currentPath: stat(".") failed can you tell me how to fix this? Apr 26 17:04:46 Hi everyone, I hope you can help me I am trying to compile a QT program but no matter what I use for the project path it can't find it even if I am running the qtchoose or qmake from the project directory... any ideas? Apr 26 17:18:42 is there anyone even in here? Apr 26 17:23:21 can anyone see my text? Apr 26 17:23:58 i see the support is just as good as the net i am going back to pi Apr 26 19:46:53 zeekhuge: Where did you get the information about programming the interface between the PRU and the host for your BeagleScope code? Apr 26 20:45:30 those am57x lok soooo pretty Apr 26 20:46:17 wow busy day today in the beaglebone black channel Apr 26 20:46:23 err or beagle channel Apr 26 20:57:54 NTQ: by reading the kernel code .. Apr 26 20:58:45 okay, sounds like stuff to study for some time. Apr 26 21:25:18 have a good one Apr 26 21:39:50 NTQ: .. its very simple now if you can use C on the PRUs Apr 26 21:46:45 blah C on the PRU Apr 26 21:46:54 why not BASIC on a super computer ;) Apr 26 23:31:36 HI Apr 26 23:35:42 some on ther to help me on beaglebone JTAG issue ? Apr 26 23:52:53 hi **** ENDING LOGGING AT Thu Apr 27 03:00:00 2017