**** BEGIN LOGGING AT Thu May 25 03:00:03 2017 May 25 09:57:26 hi. i recently got the Beagle Bone Black Wireless, but i can't get the Wi-Fi to work. It isn't even listed in 'ip link', and i can't find any mention of it in dmesg. May 25 09:58:25 tried it in both the linux installation that it shipped with (on the emmc), and from a fresh Arch Linux on a micro sd card. May 25 12:22:00 On AM335x,a register has its base address and offset. Why do we need divide offset by 4 for reference ? https://pastebin.com/VmZS7rME May 25 13:28:28 im facing u-boot-spl.bin issue May 25 13:30:08 im facing u-boot-spl.bin issue May 25 14:39:41 since I don't have an usart cable handy, does anyone know how to make the bbb boot from emmc after flashing it from the SD card? (rcn-ee ubuntu img) May 25 14:48:25 mmm maybe i didn't flash it properly May 25 18:03:22 Hi guys May 25 18:04:11 Have a question about SPI. I'm running the latest debian image from beagleboard.org on my Beaglebone Black. I can get a loopback test to work, but looking at the clock on my logic analyzer, it's not correct. May 25 18:04:17 It just looks like a couple irregular pulses May 25 18:04:37 I've disabled the HDMI cape and I'm using the BB-SPIDEV0 overlay right now May 25 18:07:02 M-ou-se: is the driver enabled in your kernel? May 25 18:08:27 It should be. I see the chip select line going low like it should be. May 25 18:09:10 mag: hey, thanks for replying. it seems like the eeprom was programmed incorrectly in the factory or something. the board didn't know it is the wireless version. May 25 18:09:18 quicksort: my msg was for M-ou-se May 25 18:09:38 M-ou-se: k May 25 18:10:43 mag: symlinking am335x-boneblack.dts to am335x-boneblack-wireless.dts worked as a quick 'n dirty workaround. May 25 18:10:57 k May 25 18:11:01 but the reseller is sending me a new one without this error :) May 25 18:11:13 sounds like you're on top of it. cool :) May 25 18:11:46 running into these kind of problems is a great way to learn ;) May 25 18:12:10 yep :) May 25 19:44:47 Hello, I want to add a driver that doesn't exits in BBB linux. here is the link foru source : https://github.com/Microchip-Ethernet/UNG8071/tree/master/KSZ/linux-drivers/ksz9897/latest . how do i do that? May 25 20:02:50 I'm looking at a partition table for an image for the beaglebone and it says there's one bootable linux partition, but if you mount the image at that partition it doesn't look like a linux file system. May 25 20:06:45 Where's the linux file system? And how come it's only 1 partition? May 25 20:07:01 Sorry this is kind of blowing my mind. May 25 20:25:32 It's ok guys I figured it out. May 25 21:19:29 lol, there's a company named Potato that makes ICs... i.e. Potato chips May 25 21:20:12 https://www.youtube.com/watch?v=8rRRvgjLjZU May 25 23:41:24 hey guys May 25 23:41:26 allah is doing May 25 23:41:33 sun is not doing allah is doing May 25 23:41:34 to accept Islam say that i bear witness that there is no deity worthy of worship except Allah and Muhammad peace be upon him is his slave and messenger **** ENDING LOGGING AT Fri May 26 03:00:03 2017