**** BEGIN LOGGING AT Thu Sep 14 03:00:00 2017 Sep 14 06:04:20 I have interface RTC DS1307 with Beaglebone. However when the beaglebone boots up, its time is reset and RTC takes this reset time. What would be the sol ution ? Sep 14 06:06:37 what is the problem? that it sets time from ext RTC, or that it takes time, or that it resets time? you are vague Sep 14 06:11:25 Sameer: ^^^^ Sep 14 06:14:14 RTC shows the beaglebone's reset time Sep 14 06:18:50 rtc has a battery backup? Sep 14 06:20:54 Yess Sep 14 06:25:04 move it to the other spi/i2c bus, or find teh kernel flag to not set tiem suing it, or add a serial gps $5 and use that for time base Sep 14 06:31:26 Ok, wil try that. Thanks Sep 14 07:34:23 i have a BBB card, when i plug it and install drivers on windows 7 i get error with unknown device "CDC serial" , can someone know how to resolve this? Sep 14 07:34:49 Hi I have a beagleboard-x15, I wanted to use mcspi4 on the m4 side. so my question is it possible to access mcpi4 on m4 side ? Sep 14 14:06:30 hi there channel :-) Sep 14 14:07:04 runing rev. A5C Sep 14 14:07:21 hi there samael Sep 14 14:07:36 samael, busy? Sep 14 14:09:36 hoping to run this => bone-debian-8.9-console-armhf-2017-09-01-1gb.img.xz can it flash it in eMMC? Sep 14 14:13:33 how do I flash eMMC with this -> bone-debian-8.9-console-armhf-2017-09-01-1gb.img.xz Sep 14 15:11:50 dury: just follow the links/instructions here depending on the OS you're working on http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Jessie_Snapshot_console Sep 14 15:16:39 samael, how are you there? Sep 14 20:04:33 is it possible to remote debug using gdb multiarch and gdbserver as sudo on BBB? Sep 14 20:28:16 uh, sure? Sep 14 20:37:44 zmatt: why? Sep 14 20:38:54 zmatt: ;) kidding around, but seriously i do need to debug a program that needs susdo Sep 14 20:40:04 you mean it needs to run as root... okay? how it that relevant to gdb? Sep 14 20:40:15 found this: https://www.raspberrypi.org/forums/viewtopic.php?f=33&t=108192 but that forces all debugging to be sudo Sep 14 20:41:08 not sure if it is relevant to gdb sopecifically Sep 14 20:42:51 oh you're actually asking an eclipse question Sep 14 20:43:41 yea probably thought maybe folks had run into the same issue with BBB Sep 14 20:44:23 no, you'd just run sudo gdb ./your-program or sudo gdbserver ./your-program Sep 14 20:54:23 zmatt: found a solution based on the link, will work i think Sep 14 20:59:58 requires interaction to type sudo password when starting the debug session, but works ok i geuss Sep 14 21:37:16 hi there all Sep 14 21:37:52 ohay Sep 14 21:41:19 anyone use rev. A5C ? Sep 14 22:03:56 debian 8.9 console for this A5C, right in 2 GB eMMC ? Sep 14 22:04:35 then can it run openbox? **** ENDING LOGGING AT Fri Sep 15 03:00:01 2017