**** BEGIN LOGGING AT Thu May 03 03:00:05 2018 May 03 03:53:15 too funny... May 03 04:12:25 nitty bitty May 03 10:46:39 hi May 03 10:47:43 can any one help for uart interrupt functionality enable in debian 9.2 May 03 10:48:38 required driver and application code in c May 03 11:04:10 ravinderreddy: here you go: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/drivers/tty/serial/omap-serial.c May 03 12:28:04 Hi May 03 12:28:22 I think there might be a fault in my PRU device tree May 03 12:28:33 The PRU UIO doesn't get loaded May 03 12:44:46 bou4: if you want feedback, it'll help to share a link to your current overlay source code May 03 12:45:24 does it work if you add uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo to uEnv.txt? May 03 12:48:25 bbl May 03 13:38:50 hey guys May 03 14:08:58 Newbie question (to save me some time).. Which Yocto build method is preferred for beaglebones? Removing the yocto-bsp and use MACHINE=beaglebone, or keep the yocto-bsp and just build with MACHINE=am335x-evm? May 03 14:10:15 better ask the #yocto people May 03 14:10:47 What do all the "Beaglebonians" use? Buildroot? May 03 14:11:19 default debian builds seem reasonably popular and useful (don't use the desktop image, is the protip though) May 03 14:11:38 then again, most people here don't productize May 03 14:11:48 Ahh, I see. May 03 14:12:09 denix: ^^^^^^^^ May 03 14:14:16 To give further context, I'm actually not building for a Beaglebone per se. I'm building for an Octavo OSD3358-SM-RED board, because I'm evaluating the processor. It's supposed to be compatible, with the exception of requiring a difference in the device-tree. So I was going to do start with a beaglebone build and then swap the device-tree from under it. May 03 14:15:15 Hi, LetoThe2nd :D May 03 14:15:54 LetoThe2nd: I probably had a different nick before.. We met at ELCE'17 .. I'm the Icelandic guy ;) May 03 14:16:08 jof: yeah, bell just rung :) May 03 14:17:51 Sorry for leaving so abruptly May 03 14:47:56 What packages do I need to compile a kernel module on the BBB itself? May 03 15:59:51 Hi I am working on the BBB could you tell me exactly which part is U105 and if there is an alternat part. Thanks May 03 16:19:27 hot: uhh, there's no "U105" on the BBB May 03 19:09:19 What would be the easiest way to check if the PRU really writes to the McASP registers May 03 19:09:26 A dump via /dev/mem? May 03 21:17:34 zmatt: to choose the value for RPBIT in the RFMT header May 03 21:17:42 register* May 03 21:18:15 what operations are already happened to the sample? May 03 23:22:40 What should I do with a dead pocketbone, I was thinking about turning it into a keyring May 03 23:24:19 s/pocketbone/pocketbeagle May 04 02:29:35 Hello! May 04 02:30:59 I am getting some edu. on the L298. This h-bridge is destroying my relationship w/ motors. No! May 04 02:31:34 ... May 04 02:32:05 blah. May 04 02:45:29 sure it is May 04 02:45:34 :D May 04 02:51:48 Hey! May 04 02:52:02 GenTooMan is in "da' hizzy!" May 04 02:52:11 da' hizzy = the house May 04 02:53:47 Mo' LEDs, mo' problems May 04 02:54:23 I ran some software for a motor and got an LED to blink. I ran some software for an LED and the motor does not move. May 04 02:54:25 ... May 04 02:55:01 Backwards day was yesterday or something. L298 got you down...tell me about it. May 04 02:56:54 L298 is straight forward but being sure the IO is doing what it is supposed to is another matter. Are you running steppers or brushed motors? **** ENDING LOGGING AT Fri May 04 03:00:04 2018