**** BEGIN LOGGING AT Tue Apr 23 02:59:57 2019 **** BEGIN LOGGING AT Tue Apr 23 07:42:34 2019 Apr 23 10:25:08 I am using Debian 9.5 BBBW. I wrote a script to run during boot related to pru but it says "/sys/class/remoteproc/remoteproc2/firmware: No such file or directory". If I run after boot it is working ok. It seems I am running the script before pru is ready. If anyone know how to check whether pru is ready? Apr 23 14:12:00 Hi Apr 23 14:12:34 I am trying to make CAN communication between BBB wireless boards Apr 23 14:13:27 Do we need to buy any additional module for it (as CAN Transceiver)? Apr 23 14:14:04 Are there any suggestions to enable the CAN on BBB rev C board? Apr 23 14:14:15 I tried a lot, but it seems, not working.. Apr 23 14:14:32 Any help would be greatly appreciated.. Apr 23 14:21:02 ? Apr 23 14:23:14 Hi Apr 23 14:27:02 hello Apr 23 14:39:04 chinna_: you configure the pins of the can interface using 'config-pin', that's basically the only platform-dependent step. after that you setup the can interface Apr 23 14:39:36 (the can interfaces already exist even if you haven't configured the pins, but they will simply not work in that case) Apr 23 14:45:21 Hello Zmatt...thanks for the reply..I tried to configure the pins for can interface Apr 23 14:45:57 but, seems not working..will you suggest any source, where I can find accurate information on how to configure the pins? Apr 23 14:48:40 ?? Apr 23 14:54:21 hi Apr 23 15:02:47 .. Apr 23 15:21:11 hey is someone faniliar with rs485 communication through a BeagleBone Comms CapeA2? Apr 23 15:22:08 More particularly with Device overlay? Apr 23 17:38:44 U-Boot SPL 2018.09-00002-g0b54a51eee (Sep 10 2018 - 19:41:39 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! Apr 23 17:38:59 Did I kill BBB? Apr 23 17:43:59 no Apr 23 18:17:22 Is there a way to recover BBB? Apr 23 18:20:07 you just rewrite the card / replace the card / reflash eMMC Apr 23 18:29:57 Why is the connection no secure? Apr 23 18:37:26 Hello everybody. I own a BBB and try to connect to the preinstalled Debian image. I tried accessing it via USB with ip 192.168.7.2 and 192.168.6.2. Why is that not possible? Apr 23 18:39:29 Can I change the static ip address via usb? Apr 23 18:48:37 notstop: stick around next time if you want answers. Apr 23 19:12:22 Flashing eMMC Apr 23 19:13:06 while flushing eMMC the procedure has failed somehow. Now I cannot boot from eMMC anymore. Apr 23 19:13:48 I cannot change /boot/uEnv.txt to uncomment flash line Apr 23 19:14:09 What is the way for me to flash eMMC now? Apr 23 19:28:01 you change /boot/uEnv.txt on a sd card Apr 23 19:28:08 the state of the emmc doesn't matter much Apr 23 19:49:10 mawk: Thanks! Apr 23 19:54:40 hi Apr 23 19:55:16 are there anyone to help on CAN communication with BBB? Apr 23 19:56:44 After installing can-utils and everything..when I type "candump -l any,0:0,#FFFFFFFF", the BBB is not throwing any dta Apr 23 19:57:01 *data Apr 23 20:02:47 hi Apr 23 20:28:08 hi Apr 23 21:31:04 dreamhiker2: If that idea has not been settled, you can try a new image for your BBB family boards w/ a "flasher" image at: https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_9_.28Stretch.29_-_Weekly. Apr 23 21:31:05 ... Apr 23 21:31:22 They have many "flasher" images available for all sorts of the boards. Apr 23 22:19:14 I was reviewing the blog. Some people made some headway w/ the OSHWA people. BBB! Apr 23 22:19:36 chinna_: did you configure the pins using config-pin ? Apr 23 22:20:05 zmatt: How "be" it? Apr 23 22:20:28 I'm fine :) also not really here, doing stuff Apr 23 22:20:36 Okay. No issue. Apr 23 22:20:38 Enjoy! Apr 23 22:21:24 I putting some certs. on this site. Apr 23 22:21:38 I do not have my lock icon just yet. Apr 23 22:22:35 zmatt: oh and one of my sites...blah! It only shows on my network and not the WWW. Apr 23 22:23:02 Anyway...good on you. I will leave you in peace now. **** ENDING LOGGING AT Wed Apr 24 02:59:57 2019